cleanup

Woops accidently committed this, still need to review/change it before comitting.

This reverts commit e11c332808.

.github/FUNDING.yml

@@ -0,0 +1,5 @@
+# These are supported funding model platforms
+
+github: psy0rz
+ko_fi: psy0rz
+custom: https://paypal.me/psy0rz

.github/workflows/python-publish.yml

@@ -14,19 +14,33 @@ jobs:
 
     steps:
     - uses: actions/checkout@v2
-    - name: Set up Python
+
+    - name: Set up Python 3.x
       uses: actions/setup-python@v2
       with:
         python-version: '3.x'
-    - name: Install dependencies
+
+    - name: Set up Python 2.x
+      uses: actions/setup-python@v2
+      with:
+        python-version: '2.x'
+
+    - name: Install dependencies 3.x
       run: |
         python -m pip install --upgrade pip
-        pip install setuptools wheel twine
+        pip3 install setuptools wheel twine
+
+    - name: Install dependencies 2.x
+      run: |
+        python2 -m pip install --upgrade pip
+        pip2 install setuptools wheel twine
+
     - name: Build and publish
       env:
         TWINE_USERNAME: ${{ secrets.TWINE_USERNAME }}
         TWINE_PASSWORD: ${{ secrets.TWINE_PASSWORD }}
       run: |
-        python setup.py sdist bdist_wheel
-        python3 -m twine check dist/*
+        python3 setup.py sdist bdist_wheel
+        python2 setup.py sdist bdist_wheel
+        twine check dist/*
         twine upload dist/*

.github/workflows/regression.yml

@@ -17,7 +17,7 @@ jobs:
 
 
       - name: Prepare
-        run: lsmod && sudo apt update && sudo apt install zfsutils-linux && sudo -H pip3 install coverage unittest2 mock==3.0.5 coveralls
+        run: sudo apt update && sudo apt install zfsutils-linux lzop pigz zstd gzip xz-utils lz4 mbuffer && sudo -H pip3 install coverage unittest2 mock==3.0.5 coveralls
 
 
       - name: Regression test
@@ -27,7 +27,7 @@ jobs:
       - name: Coveralls
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        run: coveralls --service=github
+        run: coveralls --service=github || true
 
   ubuntu18:
     runs-on: ubuntu-18.04
@@ -39,7 +39,7 @@ jobs:
 
 
       - name: Prepare
-        run: lsmod && sudo apt update && sudo apt install zfsutils-linux python3-setuptools && sudo -H pip3 install coverage unittest2 mock==3.0.5 coveralls
+        run: sudo apt update && sudo apt install zfsutils-linux python3-setuptools lzop pigz zstd gzip xz-utils liblz4-tool mbuffer && sudo -H pip3 install coverage unittest2 mock==3.0.5 coveralls
 
 
       - name: Regression test
@@ -49,4 +49,28 @@ jobs:
       - name: Coveralls
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-        run: coveralls --service=github
+        run: coveralls --service=github || true
+
+  ubuntu18_python2:
+    runs-on: ubuntu-18.04
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v2.3.4
+
+      - name: Set up Python 2.x
+        uses: actions/setup-python@v2
+        with:
+          python-version: '2.x'
+
+      - name: Prepare
+        run: sudo apt update && sudo apt install zfsutils-linux python-setuptools lzop pigz zstd gzip xz-utils liblz4-tool mbuffer && sudo -H pip install coverage unittest2 mock==3.0.5 coveralls colorama
+
+      - name: Regression test
+        run: sudo -E ./tests/run_tests
+
+      - name: Coveralls
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          COVERALLS_REPO_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        run: coveralls --service=github || true

.gitignore

@@ -11,4 +11,4 @@ __pycache__
 python2.env
 venv
 .idea
-OQ
+password.sh

README.md

@@ -5,7 +5,7 @@
 
 ## Introduction
 
-This is a tool I wrote to make replicating ZFS datasets easy and reliable.
+ZFS-autobackup tries to be the most reliable and easiest to use tool, while having all the features.
 
 You can either use it as a **backup** tool, **replication** tool or **snapshot** tool.
 
@@ -13,651 +13,49 @@ You can select what to backup by setting a custom `ZFS property`. This makes it
 
 Other settings are just specified on the commandline: Simply setup and test your zfs-autobackup command and  fix all the issues you might encounter. When you're done you can just copy/paste your command to a cron or script.
 
-Since its using ZFS commands, you can see what its actually doing by specifying `--debug`. This also helps a lot if you run into some strange problem or error. You can just copy-paste the command that fails and play around with it on the commandline. (something I missed in other tools)
+Since its using ZFS commands, you can see what it's actually doing by specifying `--debug`. This also helps a lot if you run into some strange problem or error. You can just copy-paste the command that fails and play around with it on the commandline. (something I missed in other tools)
 
 An important feature thats missing from other tools is a reliable `--test` option: This allows you to see what zfs-autobackup will do and tune your parameters. It will do everything, except make changes to your system.
 
-zfs-autobackup tries to be the easiest to use backup tool for zfs.
-
 ## Features
 
 * Works across operating systems: Tested with **Linux**, **FreeBSD/FreeNAS** and **SmartOS**.
 * Low learning curve: no complex daemons or services, no additional software or networking needed. (Only read this page)   
 * Plays nicely with existing replication systems. (Like Proxmox HA)
-* Automatically selects filesystems to backup by looking at a simple ZFS property. (recursive)
+* Automatically selects filesystems to backup by looking at a simple ZFS property. 
 * Creates consistent snapshots. (takes all snapshots at once, atomicly.)
 * Multiple backups modes:
   * Backup local data on the same server.
   * "push" local data to a backup-server via SSH.
   * "pull" remote data from a server via SSH and backup it locally.
-  * Or even pull data from a server while pushing the backup to another server. (Zero trust between source and target server)
-* Can be scheduled via a simple cronjob or run directly from commandline.
-* Supports resuming of interrupted transfers. 
+  * "pull+push": Zero trust between source and target.
+* Can be scheduled via simple cronjob or run directly from commandline.
+* ZFS encryption support: Can decrypt / encrypt or even re-encrypt datasets during transfer.
+* Supports sending with compression. (Using pigz, zstd etc)
+* IO buffering to speed up transfer.
+* Bandwidth rate limiting.
 * Multiple backups from and to the same datasets are no problem.
-* Creates the snapshot before doing anything else. (assuring you at least have a snapshot if all else fails)
-* Checks everything but tries continue on non-fatal errors when possible. (Reports error-count when done)
+* Resillient to errors.
 * Ability to manually 'finish' failed backups to see whats going on.
 * Easy to debug and has a test-mode. Actual unix commands are printed.
-* Uses **progressive thinning** for older snapshots.
-* Uses zfs-holds on important snapshots so they cant be accidentally destroyed.
+* Uses progressive thinning for older snapshots.
+* Uses zfs-holds on important snapshots to prevent accidental deletion.
 * Automatic resuming of failed transfers.
-* Can continue from existing common snapshots. (e.g. easy migration)
-* Gracefully handles destroyed datasets on source.
+* Easy migration from existing zfs backups.
+* Gracefully handles datasets that no longer exist on source.
+* Complete and clean logging. 
 * Easy installation:
-  * Just install zfs-autobackup via pip, or download it manually.
-  * Written in python and uses zfs-commands, no 3rd party dependency's or libraries needed.
-  * No separate config files or properties. Just one zfs-autobackup command you can copy/paste in your backup script.
+  * Just install zfs-autobackup via pip.
+  * Only needs to be installed on one side.
+  * Written in python and uses zfs-commands, no special 3rd party dependency's or compiled libraries needed.
+  * No annoying config files or properties. 
 
-## Installation
+## Getting started
 
-### Using pip
-
-The recommended way on most servers is to use [pip](https://pypi.org/project/zfs-autobackup/):
-
-```console
-[root@server ~]# pip install --upgrade zfs-autobackup
-```
-
-This can also be used to upgrade zfs-autobackup to the newest stable version.
-
-### Using easy_install
-
-On older servers you might have to use easy_install
-
-```console
-[root@server ~]# easy_install zfs-autobackup
-```
-
-## Example
-
-In this example we're going to backup a machine called `server1` to a machine called `backup`.
-
-### Setup SSH login
-
-zfs-autobackup needs passwordless login via ssh. This means generating an ssh key and copying it to the remote server.
-
-#### Generate SSH key on `backup`
-
-On the backup-server that runs zfs-autobackup you need to create an SSH key. You only need to do this once.
-
-Use the `ssh-keygen` command and leave the passphrase empty:
-
-```console
-root@backup:~# ssh-keygen
-Generating public/private rsa key pair.
-Enter file in which to save the key (/root/.ssh/id_rsa):
-Enter passphrase (empty for no passphrase):
-Enter same passphrase again:
-Your identification has been saved in /root/.ssh/id_rsa.
-Your public key has been saved in /root/.ssh/id_rsa.pub.
-The key fingerprint is:
-SHA256:McJhCxvaxvFhO/3e8Lf5gzSrlTWew7/bwrd2U2EHymE root@backup
-The key's randomart image is:
-+---[RSA 2048]----+
-|    + =          |
-|   + X *    E .  |
-|  . = B +  o o . |
-|   .   o +  o  o.|
-|        S o   .oo|
-|         . + o= +|
-|          . ++==.|
-|            .+o**|
-|           .. +B@|
-+----[SHA256]-----+
-root@backup:~#
-```
-
-#### Copy SSH key to `server1`
-
-Now you need to copy the public part of the key to `server1`
-
-The `ssh-copy-id` command is a handy tool to automate this. It will just ask for your password.
-
-```console
-root@backup:~# ssh-copy-id root@server1.server.com
-/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub"
-/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
-/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
-Password:
-
-Number of key(s) added: 1
-
-Now try logging into the machine, with:   "ssh 'root@server1.server.com'"
-and check to make sure that only the key(s) you wanted were added.
-
-root@backup:~#
-```
-This allows the backup-server to login to `server1` as root without password.
-
-### Select filesystems to backup
-
-Its important to choose a unique and consistent backup name. In this case we name our backup: `offsite1`.
-
-On the source zfs system set the ```autobackup:offsite1``` zfs property to true:
-
-```console
-[root@server1 ~]# zfs set autobackup:offsite1=true rpool
-[root@server1 ~]# zfs get -t filesystem,volume autobackup:offsite1
-NAME                                    PROPERTY             VALUE                SOURCE
-rpool                                   autobackup:offsite1  true                 local
-rpool/ROOT                              autobackup:offsite1  true                 inherited from rpool
-rpool/ROOT/server1-1                    autobackup:offsite1  true                 inherited from rpool
-rpool/data                              autobackup:offsite1  true                 inherited from rpool
-rpool/data/vm-100-disk-0                autobackup:offsite1  true                 inherited from rpool
-rpool/swap                              autobackup:offsite1  true                 inherited from rpool
-...
-```
-
-Because we don't want to backup everything, we can exclude certain filesystem by setting the property to false:
-
-```console
-[root@server1 ~]# zfs set autobackup:offsite1=false rpool/swap
-[root@server1 ~]# zfs get -t filesystem,volume autobackup:offsite1
-NAME                                    PROPERTY             VALUE                SOURCE
-rpool                                   autobackup:offsite1  true                 local
-rpool/ROOT                              autobackup:offsite1  true                 inherited from rpool
-rpool/ROOT/server1-1                    autobackup:offsite1  true                 inherited from rpool
-rpool/data                              autobackup:offsite1  true                 inherited from rpool
-rpool/data/vm-100-disk-0                autobackup:offsite1  true                 inherited from rpool
-rpool/swap                              autobackup:offsite1  false                local
-...
-```
-
-### Running zfs-autobackup
-
-Run the script on the backup server and pull the data from the server specified by --ssh-source.
-
-```console
-[root@backup ~]# zfs-autobackup --ssh-source server1.server.com offsite1 backup/server1 --progress --verbose
-
-  #### Settings summary
-  [Source] Datasets on: server1.server.com
-  [Source] Keep the last 10 snapshots.
-  [Source] Keep every 1 day, delete after 1 week.
-  [Source] Keep every 1 week, delete after 1 month.
-  [Source] Keep every 1 month, delete after 1 year.
-  [Source] Send all datasets that have 'autobackup:offsite1=true' or 'autobackup:offsite1=child'
-
-  [Target] Datasets are local
-  [Target] Keep the last 10 snapshots.
-  [Target] Keep every 1 day, delete after 1 week.
-  [Target] Keep every 1 week, delete after 1 month.
-  [Target] Keep every 1 month, delete after 1 year.
-  [Target] Receive datasets under: backup/server1
-
-  #### Selecting
-  [Source] rpool: Selected (direct selection)
-  [Source] rpool/ROOT: Selected (inherited selection)
-  [Source] rpool/ROOT/server1-1: Selected (inherited selection)
-  [Source] rpool/data: Selected (inherited selection)
-  [Source] rpool/data/vm-100-disk-0: Selected (inherited selection)
-  [Source] rpool/swap: Ignored (disabled)
-
-  #### Snapshotting
-  [Source] rpool: No changes since offsite1-20200218175435
-  [Source] rpool/ROOT: No changes since offsite1-20200218175435
-  [Source] rpool/data: No changes since offsite1-20200218175435
-  [Source] Creating snapshot offsite1-20200218180123
-
-  #### Sending and thinning
-  [Target] backup/server1/rpool/ROOT/server1-1@offsite1-20200218175435: receiving full
-  [Target] backup/server1/rpool/ROOT/server1-1@offsite1-20200218175547: receiving incremental
-  [Target] backup/server1/rpool/ROOT/server1-1@offsite1-20200218175706: receiving incremental
-  [Target] backup/server1/rpool/ROOT/server1-1@offsite1-20200218180049: receiving incremental
-  [Target] backup/server1/rpool/ROOT/server1-1@offsite1-20200218180123: receiving incremental
-  [Target] backup/server1/rpool/data@offsite1-20200218175435: receiving full
-  [Target] backup/server1/rpool/data/vm-100-disk-0@offsite1-20200218175435: receiving full
-  ...
-```
-
-Note that this is called a "pull" backup: The backup server pulls the backup from the server. This is usually the preferred way.
-
-Its also possible to let a server push its backup to the backup-server. However this has security implications. In that case you would setup the SSH keys the other way around and use the --ssh-target parameter on the server.
-
-### Automatic backups
-
-Now every time you run the command, zfs-autobackup will create a new snapshot and replicate your data.
-
-Older snapshots will eventually be deleted, depending on the `--keep-source` and `--keep-target` settings. (The defaults are shown above under the 'Settings summary')
-
-Once you've got the correct settings for your situation, you can just store the command in a cronjob.
-
-Or just create a script and run it manually when you need it.
-
-## Use as snapshot tool
-
-You can use zfs-autobackup to only make snapshots.
-
-Just dont specify the target-path:
-```console
-root@ws1:~# zfs-autobackup test --verbose
-  zfs-autobackup v3.0 - Copyright 2020 E.H.Eefting (edwin@datux.nl)
-
-  #### Source settings
-  [Source] Datasets are local
-  [Source] Keep the last 10 snapshots.
-  [Source] Keep every 1 day, delete after 1 week.
-  [Source] Keep every 1 week, delete after 1 month.
-  [Source] Keep every 1 month, delete after 1 year.
-  [Source] Selects all datasets that have property 'autobackup:test=true' (or childs of datasets that have 'autobackup:test=child')
-
-  #### Selecting
-  [Source] test_source1/fs1: Selected (direct selection)
-  [Source] test_source1/fs1/sub: Selected (inherited selection)
-  [Source] test_source2/fs2: Ignored (only childs)
-  [Source] test_source2/fs2/sub: Selected (inherited selection)
-
-  #### Snapshotting
-  [Source] Creating snapshots test-20200710125958 in pool test_source1
-  [Source] Creating snapshots test-20200710125958 in pool test_source2
-
-  #### Thinning source
-  [Source] test_source1/fs1@test-20200710125948: Destroying
-  [Source] test_source1/fs1/sub@test-20200710125948: Destroying
-  [Source] test_source2/fs2/sub@test-20200710125948: Destroying
-
-  #### All operations completed successfully
-  (No target_path specified, only operated as snapshot tool.)
-```
-
-This also allows you to make several snapshots during the day, but only backup the data at night when the server is not busy.
-
-## Thinning out obsolete snapshots
-
-The thinner is the thing that destroys old snapshots on the source and target.
-
-The thinner operates "stateless": There is nothing in the name or properties of a snapshot that indicates how long it will be kept. Everytime zfs-autobackup runs, it will look at the timestamp of all the existing snapshots. From there it will determine which snapshots are obsolete according to your schedule. The advantage of this stateless system is that you can always change the schedule.
-
-Note that the thinner will ONLY destroy snapshots that are matching the naming pattern of zfs-autobackup. If you use `--other-snapshots`, it wont destroy those snapshots after replicating them to the target.
-
-### Destroying missing datasets
-
-When a dataset has been destroyed or deselected on the source, but still exists on the target we call it a missing dataset. Missing datasets will be still thinned out according to the schedule.
-
-The final snapshot will never be destroyed, unless you specify a **deadline** with the `--destroy-missing` option:
-
-In that case it will look at the last snapshot we took and determine if is older than the deadline you specified. e.g: `--destroy-missing 30d` will start destroying things 30 days after the last snapshot.
-
-#### After the deadline
-
-When the deadline is passed, all our snapshots, except the last one will be destroyed. Irregardless of the normal thinning schedule.
-
-The dataset has to have the following properties to be finally really destroyed:
-
-* The dataset has no direct child-filesystems or volumes.
-* The only snapshot left is the last one created by zfs-autobackup.
-* The remaining snapshot has no clones.
-
-### Thinning schedule
-
-The default thinning schedule is: `10,1d1w,1w1m,1m1y`.
-
-The schedule consists of multiple rules separated by a `,`
-
-A plain number specifies how many snapshots you want to always keep, regardless of time or interval.
-
-The format of the other rules is: `<Interval><TTL>`.
-
-* Interval: The minimum interval between the snapshots. Snapshots with intervals smaller than this will be destroyed.
-* TTL: The maximum time to life time of a snapshot, after that they will be destroyed.
-* These are the time units you can use for interval and TTL:
-  * `y`: Years
-  * `m`: Months
-  * `d`: Days
-  * `h`: Hours
-  * `min`: Minutes
-  * `s`: Seconds
-
-Since this might sound very complicated, the `--verbose` option will show you what it all means:
-
-```console
-  [Source] Keep the last 10 snapshots.
-  [Source] Keep every 1 day, delete after 1 week.
-  [Source] Keep every 1 week, delete after 1 month.
-  [Source] Keep every 1 month, delete after 1 year.
-```
-
-A snapshot will only be destroyed if it not needed anymore by ANY of the rules.
-
-You can specify as many rules as you need. The order of the rules doesn't matter.
-
-Keep in mind its up to you to actually run zfs-autobackup often enough: If you want to keep hourly snapshots, you have to make sure you at least run it every hour.
-
-However, its no problem if you run it more or less often than that: The thinner will still keep an optimal set of snapshots to match your schedule as good as possible.
-
-If you want to keep as few snapshots as possible, just specify 0. (`--keep-source=0` for example)
-
-If you want to keep ALL the snapshots, just specify a very high number.
-
-### More details about the Thinner
-
-We will give a practical example of how the thinner operates.
-
-Say we want have 3 thinner rules:
-
-* We want to keep daily snapshots for 7 days.
-* We want to keep weekly snapshots for 4 weeks.
-* We want to keep monthly snapshots for 12 months.
-
-So far we have taken 4 snapshots at random moments:
-
-![thinner example](https://raw.githubusercontent.com/psy0rz/zfs_autobackup/master/doc/thinner.png)
-
-For every rule, the thinner will divide the timeline in blocks and assign each snapshot to a block.
-
-A block can only be assigned one snapshot: If multiple snapshots fall into the same block, it only assigns it to the oldest that we want to keep.
-
-The colors show to which block a snapshot belongs:
-
-* Snapshot 1: This snapshot belongs to daily block 1, weekly block 0 and monthly block 0. However the daily block is too old.
-* Snapshot 2: Since weekly block 0 and monthly block 0 already have a snapshot, it only belongs to daily block 4.
-* Snapshot 3: This snapshot belongs to daily block 8 and weekly block 1.
-* Snapshot 4: Since daily block 8 already has a snapshot, this one doesn't belong to anything and can be deleted right away. (it will be keeped for now since its the last snapshot)
-
-zfs-autobackup will re-evaluate this on every run: As soon as a snapshot doesn't belong to any block anymore it will be destroyed.
-
-Snapshots on the source that still have to be send to the target wont be destroyed off course. (If the target still wants them, according to the target schedule)
-
-## Tips
-
-* Use ```--debug``` if something goes wrong and you want to see the commands that are executed. This will also stop at the first error.
-* You can split up the snapshotting and sending tasks by creating two cronjobs. Create a separate snapshotter-cronjob by just omitting target-path.
-* Set the ```readonly``` property of the target filesystem to ```on```. This prevents changes on the target side. (Normally, if there are changes the next backup will fail and will require a zfs rollback.) Note that readonly means you cant change the CONTENTS of the dataset directly. Its still possible to receive new datasets and manipulate properties etc.
-* Use ```--clear-refreservation``` to save space on your backup server.
-* Use ```--clear-mountpoint``` to prevent the target server from mounting the backupped filesystem in the wrong place during a reboot.
-
-### Performance tips
-
-If you have a large number of datasets its important to keep the following tips in mind.
-
-#### Some statistics
-
-To get some idea of how fast zfs-autobackup is, I did some test on my laptop, with a SKHynix_HFS512GD9TNI-L2B0B disk. I'm using zfs 2.0.2.  
-
-I created 100 empty datasets and measured the total runtime of zfs-autobackup. I used all the performance tips below. (--no-holds, --allow-empty, ssh ControlMaster)
-
-* without ssh: 15 seconds. (>6 datasets/s)
-* either ssh-target or ssh-source=localhost: 20 seconds (5 datasets/s)
-* both ssh-target and ssh-source=localhost: 24 seconds (4 datasets/s)
-
-To be bold I created 2500 datasets, but that also was no problem. So it seems it should be possible to use zfs-autobackup with thousands of datasets.
-
-If you need more performance let me know.
-
-NOTE: There is actually a performance regression in ZFS version 2: https://github.com/openzfs/zfs/issues/11560 Use --no-progress as workaround.
-
-#### Less work
-
-You can make zfs-autobackup generate less work by using --no-holds and --allow-empty.
-
-This saves a lot of extra zfs-commands per dataset.
-
-#### Speeding up SSH
-
-You can make your ssh connections persistent and greatly speed up zfs-autobackup:
-
-On the backup-server add this to your ~/.ssh/config:
-
-```console
-Host *
-    ControlPath ~/.ssh/control-master-%r@%h:%p
-    ControlMaster auto
-    ControlPersist 3600
-```
-
-Thanks @mariusvw :)
-
-### Specifying ssh port or options
-
-The correct way to do this is by creating ~/.ssh/config:
-
-```console
-Host smartos04
-    Hostname 1.2.3.4
-    Port 1234
-    user root
-    Compression yes
-```
-
-This way you can just specify "smartos04" as host.
-
-Also uses compression on slow links.
-
-Look in man ssh_config for many more options.
-
-## Usage
-
-Here you find all the options:
-
-```console
-[root@server ~]# zfs-autobackup --help
-usage: zfs-autobackup [-h] [--ssh-config SSH_CONFIG] [--ssh-source SSH_SOURCE]
-                      [--ssh-target SSH_TARGET] [--keep-source KEEP_SOURCE]
-                      [--keep-target KEEP_TARGET] [--other-snapshots]
-                      [--no-snapshot] [--no-send] [--min-change MIN_CHANGE]
-                      [--allow-empty] [--ignore-replicated] [--no-holds]
-                      [--strip-path STRIP_PATH] [--clear-refreservation]
-                      [--clear-mountpoint]
-                      [--filter-properties FILTER_PROPERTIES]
-                      [--set-properties SET_PROPERTIES] [--rollback]
-                      [--destroy-incompatible] [--ignore-transfer-errors]
-                      [--raw] [--test] [--verbose] [--debug] [--debug-output]
-                      [--progress]
-                      backup-name [target-path]
-
-zfs-autobackup v3.0-rc12 - Copyright 2020 E.H.Eefting (edwin@datux.nl)
-
-positional arguments:
-  backup-name           Name of the backup (you should set the zfs property
-                        "autobackup:backup-name" to true on filesystems you
-                        want to backup
-  target-path           Target ZFS filesystem (optional: if not specified,
-                        zfs-autobackup will only operate as snapshot-tool on
-                        source)
-
-optional arguments:
-  -h, --help            show this help message and exit
-  --ssh-config SSH_CONFIG
-                        Custom ssh client config
-  --ssh-source SSH_SOURCE
-                        Source host to get backup from. (user@hostname)
-                        Default None.
-  --ssh-target SSH_TARGET
-                        Target host to push backup to. (user@hostname) Default
-                        None.
-  --keep-source KEEP_SOURCE
-                        Thinning schedule for old source snapshots. Default:
-                        10,1d1w,1w1m,1m1y
-  --keep-target KEEP_TARGET
-                        Thinning schedule for old target snapshots. Default:
-                        10,1d1w,1w1m,1m1y
-  --other-snapshots     Send over other snapshots as well, not just the ones
-                        created by this tool.
-  --no-snapshot         Don't create new snapshots (useful for finishing
-                        uncompleted backups, or cleanups)
-  --no-send             Don't send snapshots (useful for cleanups, or if you
-                        want a serperate send-cronjob)
-  --min-change MIN_CHANGE
-                        Number of bytes written after which we consider a
-                        dataset changed (default 1)
-  --allow-empty         If nothing has changed, still create empty snapshots.
-                        (same as --min-change=0)
-  --ignore-replicated   Ignore datasets that seem to be replicated some other
-                        way. (No changes since lastest snapshot. Useful for
-                        proxmox HA replication)
-  --no-holds            Don't lock snapshots on the source. (Useful to allow
-                        proxmox HA replication to switches nodes)
-  --strip-path STRIP_PATH
-                        Number of directories to strip from target path (use 1
-                        when cloning zones between 2 SmartOS machines)
-  --clear-refreservation
-                        Filter "refreservation" property. (recommended, safes
-                        space. same as --filter-properties refreservation)
-  --clear-mountpoint    Set property canmount=noauto for new datasets.
-                        (recommended, prevents mount conflicts. same as --set-
-                        properties canmount=noauto)
-  --filter-properties FILTER_PROPERTIES
-                        List of properties to "filter" when receiving
-                        filesystems. (you can still restore them with zfs
-                        inherit -S)
-  --set-properties SET_PROPERTIES
-                        List of propererties to override when receiving
-                        filesystems. (you can still restore them with zfs
-                        inherit -S)
-  --rollback            Rollback changes to the latest target snapshot before
-                        starting. (normally you can prevent changes by setting
-                        the readonly property on the target_path to on)
-  --destroy-incompatible
-                        Destroy incompatible snapshots on target. Use with
-                        care! (implies --rollback)
-  --ignore-transfer-errors
-                        Ignore transfer errors (still checks if received
-                        filesystem exists. useful for acltype errors)
-  --raw                 For encrypted datasets, send data exactly as it exists
-                        on disk.
-  --test                dont change anything, just show what would be done
-                        (still does all read-only operations)
-  --verbose             verbose output
-  --debug               Show zfs commands that are executed, stops after an
-                        exception.
-  --debug-output        Show zfs commands and their output/exit codes. (noisy)
-  --progress            show zfs progress output (to stderr). Enabled by
-                        default on ttys.
-
-When a filesystem fails, zfs_backup will continue and report the number of
-failures at that end. Also the exit code will indicate the number of failures.
-```
-
-## Troubleshooting
-
-### It keeps asking for my SSH password
-
-You forgot to setup automatic login via SSH keys, look in the example how to do this.
-
-### It says 'cannot receive incremental stream: invalid backup stream'
-
-This usually means you've created a new snapshot on the target side during a backup. If you restart zfs-autobackup, it will automaticly abort the invalid partially received snapshot and start over.
-
-### It says 'cannot receive incremental stream: destination has been modified since most recent snapshot'
-
-This means files have been modified on the target side somehow. 
-
-You can use --rollback to automaticly rollback such changes.
-
-Note: This usually happens if the source-side has a non-standard mountpoint for a dataset, and you're using --clear-mountpoint. In this case the target side creates a mountpoint in the parent dataset, causing the change. 
-
-### It says 'internal error: Invalid argument'
-
-In some cases (Linux -> FreeBSD) this means certain properties are not fully supported on the target system.
-
-Try using something like: --filter-properties xattr
-
-## Restore example
-
-Restoring can be done with simple zfs commands. For example, use this to restore a specific SmartOS disk image to a temporary restore location:
-
-```console
-root@fs1:/home/psy#  zfs send fs1/zones/backup/zfsbackups/smartos01.server.com/zones/a3abd6c8-24c6-4125-9e35-192e2eca5908-disk0@smartos01_fs1-20160110000003 | ssh root@2.2.2.2 "zfs recv zones/restore"
-```
-
-After that you can rename the disk image from the temporary location to the location of a new SmartOS machine you've created.
-
-## Monitoring with Zabbix-jobs
-
-You can monitor backups by using my zabbix-jobs script. (<https://github.com/psy0rz/stuff/tree/master/zabbix-jobs>)
-
-Put this command directly after the zfs_backup command in your cronjob:
-
-```console
-zabbix-job-status backup_smartos01_fs1 daily $?
-```
-
-This will update the zabbix server with the exit code and will also alert you if the job didn't run for more than 2 days.
-
-## Backup a proxmox cluster with HA replication
-
-Due to the nature of proxmox we had to make a few enhancements to zfs-autobackup. This will probably also benefit other systems that use their own replication in combination with zfs-autobackup.
-
-All data under rpool/data can be on multiple nodes of the cluster. The naming of those filesystem is unique over the whole cluster. Because of this we should backup rpool/data of all nodes to the same destination. This way we wont have duplicate backups of the filesystems that are replicated. Because of various options, you can even migrate hosts and zfs-autobackup will be fine. (and it will get the next backup from the new node automatically)
-
-In the example below we have 3 nodes, named pve1, pve2 and pve3.
-
-### Preparing the proxmox nodes
-
-No preparation is needed, the script will take care of everything. You only need to setup the ssh keys, so that the backup server can access the proxmox server.
-
-TIP: make sure your backup server is firewalled and cannot be reached from any production machine.
-
-### SSH config on backup server
-
-I use ~/.ssh/config to specify how to reach the various hosts.
-
-In this example we are making an offsite copy and use portforwarding to reach the proxmox machines:
-```
-Host *
-    ControlPath ~/.ssh/control-master-%r@%h:%p
-    ControlMaster auto
-    ControlPersist 3600
-    Compression yes
-
-Host pve1
-    Hostname some.host.com
-    Port 10001
-
-Host pve2
-    Hostname some.host.com
-    Port 10002
-
-Host pve3
-    Hostname some.host.com
-    Port 10003
-```
-
-### Backup script
-
-I use the following backup script on the backup server.
-
-Adjust the variables HOSTS TARGET and NAME to your needs.
-
-```shell
-#!/bin/bash
-
-HOSTS="pve1 pve2 pve3"
-TARGET=rpool/pvebackups
-NAME=prox
-
-zfs create -p $TARGET/data &>/dev/null
-for HOST in $HOSTS; do
-
-  echo "################################### RPOOL $HOST"
-
-  # enable backup
-  ssh $HOST "zfs set autobackup:rpool_$NAME=child rpool/ROOT"
-
-  #backup rpool to specific directory per host
-  zfs create -p $TARGET/rpools/$HOST &>/dev/null
-  zfs-autobackup --keep-source=1d1w,1w1m --ssh-source $HOST rpool_$NAME $TARGET/rpools/$HOST --clear-mountpoint --clear-refreservation --ignore-transfer-errors --strip-path 2 --verbose   --no-holds   $@
-
-  zabbix-job-status backup_$HOST""_rpool_$NAME daily $? >/dev/null 2>/dev/null
-
-
-  echo "################################### DATA $HOST"
-
-  # enable backup
-  ssh $HOST "zfs set autobackup:data_$NAME=child rpool/data"
-
-  #backup data filesystems to a common directory
-  zfs-autobackup --keep-source=1d1w,1w1m --ssh-source $HOST data_$NAME $TARGET/data --clear-mountpoint --clear-refreservation --ignore-transfer-errors --strip-path 2 --verbose  --ignore-replicated --min-change 200000 --no-holds   $@
-
-  zabbix-job-status backup_$HOST""_data_$NAME daily $? >/dev/null 2>/dev/null
-
-done
-```
-
-This script will also send the backup status to Zabbix. (if you've installed my zabbix-job-status script)
+Please look at our wiki to [Get started](https://github.com/psy0rz/zfs_autobackup/wiki).
 
 # Sponsor list
 
 This project was sponsorred by:
 
-* (None so far)
+* JetBrains (Provided me with a license for their whole professional product line, https://www.jetbrains.com/pycharm/ )

requirements.txt

@@ -1,6 +1,6 @@
 colorama
 argparse
-coverage==4.5.4
+coverage
 python-coveralls
 unittest2
 mock

setup.py

@@ -18,7 +18,8 @@ setuptools.setup(
     entry_points={
         'console_scripts':
             [
-                'zfs-autobackup = zfs_autobackup:cli',
+                'zfs-autobackup = zfs_autobackup.ZfsAutobackup:cli',
+                'zfs-autoverify = zfs_autobackup.ZfsAutoverify:cli',
             ]
     },
     packages=setuptools.find_packages(),

tests/autoruntests

@@ -0,0 +1,6 @@
+#!/bin/bash
+
+#NOTE: run from top directory
+
+find tests/*.py zfs_autobackup/*.py| entr -r ./tests/run_tests $@
+

tests/basetest.py

@@ -1,4 +1,6 @@
 
+# To run tests as non-root, use this hack:
+# chmod 4755 /usr/sbin/zpool /usr/sbin/zfs
 
 import subprocess
 import random
@@ -9,6 +11,7 @@ import subprocess
 import time
 from pprint import *
 from zfs_autobackup.ZfsAutobackup import *
+from zfs_autobackup.ZfsAutoverify import *
 from mock import *
 import contextlib
 import sys
@@ -58,7 +61,9 @@ def redirect_stderr(target):
 
 def shelltest(cmd):
     """execute and print result as nice copypastable string for unit tests (adds extra newlines on top/bottom)"""
-    ret=(subprocess.check_output(cmd , shell=True).decode('utf-8'))
+
+    ret=(subprocess.check_output("SUDO_ASKPASS=./password.sh sudo -A "+cmd , shell=True).decode('utf-8'))
+
     print("######### result of: {}".format(cmd))
     print(ret)
     print("#########")

tests/run_test

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+#run one test. start from main directory
+
+python -m unittest discover tests $@ -vvvf

tests/run_tests

@@ -19,7 +19,7 @@ if ! [ -e /root/.ssh/id_rsa ]; then
 fi
 
 
-coverage run --source zfs_autobackup -m unittest discover -vvvvf $SCRIPTDIR $@ 2>&1
+coverage run --branch --source zfs_autobackup -m unittest discover -vvvvf $SCRIPTDIR $@ 2>&1
 EXIT=$?
 
 echo

tests/test_cmdpipe.py

@@ -0,0 +1,123 @@
+from basetest import *
+from zfs_autobackup.CmdPipe import CmdPipe,CmdItem
+
+
+class TestCmdPipe(unittest2.TestCase):
+
+    def test_single(self):
+        """single process stdout and stderr"""
+        p=CmdPipe(readonly=False, inp=None)
+        err=[]
+        out=[]
+        p.add(CmdItem(["ls", "-d", "/", "/", "/nonexistent"], stderr_handler=lambda line: err.append(line), exit_handler=lambda exit_code: self.assertEqual(exit_code,2)))
+        executed=p.execute(stdout_handler=lambda line: out.append(line))
+
+        self.assertEqual(err, ["ls: cannot access '/nonexistent': No such file or directory"])
+        self.assertEqual(out, ["/","/"])
+        self.assertIsNone(executed)
+
+    def test_input(self):
+        """test stdinput"""
+        p=CmdPipe(readonly=False, inp="test")
+        err=[]
+        out=[]
+        p.add(CmdItem(["cat"], stderr_handler=lambda line: err.append(line), exit_handler=lambda exit_code: self.assertEqual(exit_code,0)))
+        executed=p.execute(stdout_handler=lambda line: out.append(line))
+
+        self.assertEqual(err, [])
+        self.assertEqual(out, ["test"])
+        self.assertIsNone(executed)
+
+    def test_pipe(self):
+        """test piped"""
+        p=CmdPipe(readonly=False)
+        err1=[]
+        err2=[]
+        err3=[]
+        out=[]
+        p.add(CmdItem(["echo", "test"], stderr_handler=lambda line: err1.append(line), exit_handler=lambda exit_code: self.assertEqual(exit_code,0)))
+        p.add(CmdItem(["tr", "e", "E"], stderr_handler=lambda line: err2.append(line), exit_handler=lambda exit_code: self.assertEqual(exit_code,0)))
+        p.add(CmdItem(["tr", "t", "T"], stderr_handler=lambda line: err3.append(line), exit_handler=lambda exit_code: self.assertEqual(exit_code,0)))
+        executed=p.execute(stdout_handler=lambda line: out.append(line))
+
+        self.assertEqual(err1, [])
+        self.assertEqual(err2, [])
+        self.assertEqual(err3, [])
+        self.assertEqual(out, ["TEsT"])
+        self.assertIsNone(executed)
+
+        #test str representation as well
+        self.assertEqual(str(p), "(echo test) | (tr e E) | (tr t T)")
+
+    def test_pipeerrors(self):
+        """test piped stderrs """
+        p=CmdPipe(readonly=False)
+        err1=[]
+        err2=[]
+        err3=[]
+        out=[]
+        p.add(CmdItem(["ls", "/nonexistent1"], stderr_handler=lambda line: err1.append(line), exit_handler=lambda exit_code: self.assertEqual(exit_code,2)))
+        p.add(CmdItem(["ls", "/nonexistent2"], stderr_handler=lambda line: err2.append(line), exit_handler=lambda exit_code: self.assertEqual(exit_code,2)))
+        p.add(CmdItem(["ls", "/nonexistent3"], stderr_handler=lambda line: err3.append(line), exit_handler=lambda exit_code: self.assertEqual(exit_code,2)))
+        executed=p.execute(stdout_handler=lambda line: out.append(line))
+
+        self.assertEqual(err1, ["ls: cannot access '/nonexistent1': No such file or directory"])
+        self.assertEqual(err2, ["ls: cannot access '/nonexistent2': No such file or directory"])
+        self.assertEqual(err3, ["ls: cannot access '/nonexistent3': No such file or directory"])
+        self.assertEqual(out, [])
+        self.assertIsNone(executed)
+
+    def test_exitcode(self):
+        """test piped exitcodes """
+        p=CmdPipe(readonly=False)
+        err1=[]
+        err2=[]
+        err3=[]
+        out=[]
+        p.add(CmdItem(["bash", "-c", "exit 1"], stderr_handler=lambda line: err1.append(line), exit_handler=lambda exit_code: self.assertEqual(exit_code,1)))
+        p.add(CmdItem(["bash", "-c", "exit 2"], stderr_handler=lambda line: err2.append(line), exit_handler=lambda exit_code: self.assertEqual(exit_code,2)))
+        p.add(CmdItem(["bash", "-c", "exit 3"], stderr_handler=lambda line: err3.append(line), exit_handler=lambda exit_code: self.assertEqual(exit_code,3)))
+        executed=p.execute(stdout_handler=lambda line: out.append(line))
+
+        self.assertEqual(err1, [])
+        self.assertEqual(err2, [])
+        self.assertEqual(err3, [])
+        self.assertEqual(out, [])
+        self.assertIsNone(executed)
+
+    def test_readonly_execute(self):
+        """everything readonly, just should execute"""
+
+        p=CmdPipe(readonly=True)
+        err1=[]
+        err2=[]
+        out=[]
+
+        def true_exit(exit_code):
+            return True
+
+        p.add(CmdItem(["echo", "test1"], stderr_handler=lambda line: err1.append(line), exit_handler=true_exit, readonly=True))
+        p.add(CmdItem(["echo", "test2"], stderr_handler=lambda line: err2.append(line), exit_handler=true_exit, readonly=True))
+        executed=p.execute(stdout_handler=lambda line: out.append(line))
+
+        self.assertEqual(err1, [])
+        self.assertEqual(err2, [])
+        self.assertEqual(out, ["test2"])
+        self.assertTrue(executed)
+
+    def test_readonly_skip(self):
+        """one command not readonly, skip"""
+
+        p=CmdPipe(readonly=True)
+        err1=[]
+        err2=[]
+        out=[]
+        p.add(CmdItem(["echo", "test1"], stderr_handler=lambda line: err1.append(line), readonly=False))
+        p.add(CmdItem(["echo", "test2"], stderr_handler=lambda line: err2.append(line), readonly=True))
+        executed=p.execute(stdout_handler=lambda line: out.append(line))
+
+        self.assertEqual(err1, [])
+        self.assertEqual(err2, [])
+        self.assertEqual(out, [])
+        self.assertTrue(executed)
+

tests/test_destroymissing.py

@@ -13,17 +13,17 @@ class TestZfsNode(unittest2.TestCase):
     def  test_destroymissing(self):
 
         #initial backup
-        with patch('time.strftime', return_value="10101111000000"): #1000 years in past
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-holds".split(" ")).run())
+        with patch('time.strftime', return_value="test-19101111000000"): #1000 years in past
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --no-holds".split(" ")).run())
 
-        with patch('time.strftime', return_value="20101111000000"): #far in past
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-holds --allow-empty".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"): #far in past
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --no-holds --allow-empty".split(" ")).run())
 
 
         with self.subTest("Should do nothing yet"):
             with OutputIO() as buf:
                 with redirect_stdout(buf):
-                    self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-snapshot --destroy-missing 0s".split(" ")).run())
+                    self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --no-snapshot --destroy-missing 0s".split(" ")).run())
 
                 print(buf.getvalue())
                 self.assertNotIn(": Destroy missing", buf.getvalue())
@@ -36,11 +36,11 @@ class TestZfsNode(unittest2.TestCase):
 
             with OutputIO() as buf:
                 with redirect_stdout(buf), redirect_stderr(buf):
-                        self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-snapshot --destroy-missing 0s".split(" ")).run())
+                        self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --no-snapshot --destroy-missing 0s".split(" ")).run())
 
                 print(buf.getvalue())
                 #should have done the snapshot cleanup for destoy missing:
-                self.assertIn("fs1@test-10101111000000: Destroying", buf.getvalue())
+                self.assertIn("fs1@test-19101111000000: Destroying", buf.getvalue())
 
                 self.assertIn("fs1: Destroy missing: Still has children here.", buf.getvalue())
 
@@ -54,7 +54,7 @@ class TestZfsNode(unittest2.TestCase):
             with OutputIO() as buf:
                 with redirect_stdout(buf):
                     #100y: lastest should not be old enough, while second to latest snapshot IS old enough:
-                    self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-snapshot --destroy-missing 100y".split(" ")).run())
+                    self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --no-snapshot --destroy-missing 100y".split(" ")).run())
 
                 print(buf.getvalue())
                 self.assertIn(": Waiting for deadline", buf.getvalue())
@@ -62,7 +62,7 @@ class TestZfsNode(unittest2.TestCase):
             #past deadline, destroy
             with OutputIO() as buf:
                 with redirect_stdout(buf):
-                    self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-snapshot --destroy-missing 1y".split(" ")).run())
+                    self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --no-snapshot --destroy-missing 1y".split(" ")).run())
 
                 print(buf.getvalue())
                 self.assertIn("sub: Destroying", buf.getvalue())
@@ -75,7 +75,7 @@ class TestZfsNode(unittest2.TestCase):
 
             with OutputIO() as buf:
                 with redirect_stdout(buf):
-                    self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-snapshot --destroy-missing 0s".split(" ")).run())
+                    self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --no-snapshot --destroy-missing 0s".split(" ")).run())
 
                 print(buf.getvalue())
 
@@ -90,13 +90,13 @@ class TestZfsNode(unittest2.TestCase):
 
             with OutputIO() as buf:
                 with redirect_stdout(buf), redirect_stderr(buf):
-                        self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-snapshot --destroy-missing 0s".split(" ")).run())
+                        self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --no-snapshot --destroy-missing 0s".split(" ")).run())
 
                 print(buf.getvalue())
                 #now tries to destroy our own last snapshot (before the final destroy of the dataset)
                 self.assertIn("fs1@test-20101111000000: Destroying", buf.getvalue())
                 #but cant finish because still in use:
-                self.assertIn("fs1: Error during destoy missing", buf.getvalue())
+                self.assertIn("fs1: Error during --destroy-missing", buf.getvalue())
 
             shelltest("zfs destroy test_target1/clone1")
 
@@ -105,7 +105,7 @@ class TestZfsNode(unittest2.TestCase):
 
             with OutputIO() as buf:
                 with redirect_stdout(buf), redirect_stderr(buf):
-                        self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-snapshot --destroy-missing 0s".split(" ")).run())
+                        self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --no-snapshot --destroy-missing 0s".split(" ")).run())
 
                 print(buf.getvalue())
                 #should have done the snapshot cleanup for destoy missing:
@@ -113,7 +113,7 @@ class TestZfsNode(unittest2.TestCase):
 
             with OutputIO() as buf:
                 with redirect_stdout(buf), redirect_stderr(buf):
-                        self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-snapshot --destroy-missing 0s".split(" ")).run())
+                        self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --no-snapshot --destroy-missing 0s".split(" ")).run())
 
                 print(buf.getvalue())
                 #on second run it sees the dangling ex-parent but doesnt know what to do with it (since it has no own snapshot)
@@ -130,6 +130,6 @@ test_target1/test_source1
 test_target1/test_source2
 test_target1/test_source2/fs2
 test_target1/test_source2/fs2/sub
-test_target1/test_source2/fs2/sub@test-10101111000000
+test_target1/test_source2/fs2/sub@test-19101111000000
 test_target1/test_source2/fs2/sub@test-20101111000000
 """)

tests/test_encryption.py

@@ -0,0 +1,193 @@
+from zfs_autobackup.CmdPipe import CmdPipe
+from basetest import *
+import time
+
+# We have to do a LOT to properly test encryption/decryption/raw transfers
+#
+# For every scenario we need at least:
+# - plain source dataset
+# - encrypted source dataset
+# - plain target path
+# - encrypted target path
+# - do a full transfer
+# - do a incremental transfer
+
+# Scenarios:
+# - Raw transfer
+# - Decryption transfer (--decrypt)
+# - Encryption transfer (--encrypt)
+# - Re-encryption transfer (--decrypt --encrypt)
+
+class TestZfsEncryption(unittest2.TestCase):
+
+
+    def setUp(self):
+        prepare_zpools()
+
+        try:
+            shelltest("zfs get encryption test_source1")
+        except:
+            self.skipTest("Encryption not supported on this ZFS version.")
+
+    def prepare_encrypted_dataset(self, key, path, unload_key=False):
+
+        # create encrypted source dataset
+        shelltest("rm /tmp/zfstest.key 2>/dev/null;true")
+        shelltest("echo {} > /tmp/zfstest.key".format(key))
+        shelltest("zfs create -o keylocation=file:///tmp/zfstest.key -o keyformat=passphrase -o encryption=on {}".format(path))
+
+        if unload_key:
+            shelltest("zfs unmount {}".format(path))
+            shelltest("zfs unload-key {}".format(path))
+
+        # r=shelltest("dd if=/dev/zero of=/test_source1/fs1/enc1/data.txt bs=200000 count=1")
+
+    def  test_raw(self):
+        """send encrypted data unaltered (standard operation)"""
+
+        self.prepare_encrypted_dataset("11111111", "test_source1/fs1/encryptedsource")
+        self.prepare_encrypted_dataset("11111111", "test_source1/fs1/encryptedsourcekeyless", unload_key=True) # raw mode shouldn't need a key
+        self.prepare_encrypted_dataset("22222222", "test_target1/encryptedtarget")
+
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-progress --allow-empty --exclude-received".split(" ")).run())
+            self.assertFalse(ZfsAutobackup("test test_target1/encryptedtarget --verbose --no-progress --no-snapshot --exclude-received".split(" ")).run())
+
+        with patch('time.strftime', return_value="test-20101111000001"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-progress --allow-empty --exclude-received".split(" ")).run())
+            self.assertFalse(ZfsAutobackup("test test_target1/encryptedtarget --verbose --no-progress --no-snapshot --exclude-received".split(" ")).run())
+
+        r = shelltest("zfs get -r -t filesystem encryptionroot test_target1")
+        self.assertMultiLineEqual(r,"""
+NAME                                                                  PROPERTY        VALUE                                                                 SOURCE
+test_target1                                                          encryptionroot  -                                                                     -
+test_target1/encryptedtarget                                          encryptionroot  test_target1/encryptedtarget                                          -
+test_target1/encryptedtarget/test_source1                             encryptionroot  test_target1/encryptedtarget                                          -
+test_target1/encryptedtarget/test_source1/fs1                         encryptionroot  -                                                                     -
+test_target1/encryptedtarget/test_source1/fs1/encryptedsource         encryptionroot  test_target1/encryptedtarget/test_source1/fs1/encryptedsource         -
+test_target1/encryptedtarget/test_source1/fs1/encryptedsourcekeyless  encryptionroot  test_target1/encryptedtarget/test_source1/fs1/encryptedsourcekeyless  -
+test_target1/encryptedtarget/test_source1/fs1/sub                     encryptionroot  -                                                                     -
+test_target1/encryptedtarget/test_source2                             encryptionroot  test_target1/encryptedtarget                                          -
+test_target1/encryptedtarget/test_source2/fs2                         encryptionroot  test_target1/encryptedtarget                                          -
+test_target1/encryptedtarget/test_source2/fs2/sub                     encryptionroot  -                                                                     -
+test_target1/test_source1                                             encryptionroot  -                                                                     -
+test_target1/test_source1/fs1                                         encryptionroot  -                                                                     -
+test_target1/test_source1/fs1/encryptedsource                         encryptionroot  test_target1/test_source1/fs1/encryptedsource                         -
+test_target1/test_source1/fs1/encryptedsourcekeyless                  encryptionroot  test_target1/test_source1/fs1/encryptedsourcekeyless                  -
+test_target1/test_source1/fs1/sub                                     encryptionroot  -                                                                     -
+test_target1/test_source2                                             encryptionroot  -                                                                     -
+test_target1/test_source2/fs2                                         encryptionroot  -                                                                     -
+test_target1/test_source2/fs2/sub                                     encryptionroot  -                                                                     -
+""")
+
+    def  test_decrypt(self):
+        """decrypt data and store unencrypted (--decrypt)"""
+
+        self.prepare_encrypted_dataset("11111111", "test_source1/fs1/encryptedsource")
+        self.prepare_encrypted_dataset("22222222", "test_target1/encryptedtarget")
+
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-progress --decrypt --allow-empty --exclude-received".split(" ")).run())
+            self.assertFalse(ZfsAutobackup("test test_target1/encryptedtarget --verbose --no-progress --decrypt --no-snapshot --exclude-received".split(" ")).run())
+
+        with patch('time.strftime', return_value="test-20101111000001"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-progress --decrypt --allow-empty --exclude-received".split(" ")).run())
+            self.assertFalse(ZfsAutobackup("test test_target1/encryptedtarget --verbose --no-progress --decrypt --no-snapshot --exclude-received".split(" ")).run())
+
+        r = shelltest("zfs get -r -t filesystem encryptionroot test_target1")
+        self.assertEqual(r, """
+NAME                                                           PROPERTY        VALUE                         SOURCE
+test_target1                                                   encryptionroot  -                             -
+test_target1/encryptedtarget                                   encryptionroot  test_target1/encryptedtarget  -
+test_target1/encryptedtarget/test_source1                      encryptionroot  test_target1/encryptedtarget  -
+test_target1/encryptedtarget/test_source1/fs1                  encryptionroot  -                             -
+test_target1/encryptedtarget/test_source1/fs1/encryptedsource  encryptionroot  -                             -
+test_target1/encryptedtarget/test_source1/fs1/sub              encryptionroot  -                             -
+test_target1/encryptedtarget/test_source2                      encryptionroot  test_target1/encryptedtarget  -
+test_target1/encryptedtarget/test_source2/fs2                  encryptionroot  test_target1/encryptedtarget  -
+test_target1/encryptedtarget/test_source2/fs2/sub              encryptionroot  -                             -
+test_target1/test_source1                                      encryptionroot  -                             -
+test_target1/test_source1/fs1                                  encryptionroot  -                             -
+test_target1/test_source1/fs1/encryptedsource                  encryptionroot  -                             -
+test_target1/test_source1/fs1/sub                              encryptionroot  -                             -
+test_target1/test_source2                                      encryptionroot  -                             -
+test_target1/test_source2/fs2                                  encryptionroot  -                             -
+test_target1/test_source2/fs2/sub                              encryptionroot  -                             -
+""")
+
+    def  test_encrypt(self):
+        """send normal data set and store encrypted on the other side (--encrypt) issue #60 """
+
+        self.prepare_encrypted_dataset("11111111", "test_source1/fs1/encryptedsource")
+        self.prepare_encrypted_dataset("22222222", "test_target1/encryptedtarget")
+
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-progress --encrypt --debug --allow-empty --exclude-received".split(" ")).run())
+            self.assertFalse(ZfsAutobackup("test test_target1/encryptedtarget --verbose --no-progress --encrypt --debug --no-snapshot --exclude-received".split(" ")).run())
+
+        with patch('time.strftime', return_value="test-20101111000001"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-progress --encrypt --debug --allow-empty --exclude-received".split(" ")).run())
+            self.assertFalse(ZfsAutobackup("test test_target1/encryptedtarget --verbose --no-progress --encrypt --debug --no-snapshot --exclude-received".split(" ")).run())
+
+        r = shelltest("zfs get -r -t filesystem encryptionroot test_target1")
+        self.assertEqual(r, """
+NAME                                                           PROPERTY        VALUE                                                          SOURCE
+test_target1                                                   encryptionroot  -                                                              -
+test_target1/encryptedtarget                                   encryptionroot  test_target1/encryptedtarget                                   -
+test_target1/encryptedtarget/test_source1                      encryptionroot  test_target1/encryptedtarget                                   -
+test_target1/encryptedtarget/test_source1/fs1                  encryptionroot  test_target1/encryptedtarget                                   -
+test_target1/encryptedtarget/test_source1/fs1/encryptedsource  encryptionroot  test_target1/encryptedtarget/test_source1/fs1/encryptedsource  -
+test_target1/encryptedtarget/test_source1/fs1/sub              encryptionroot  test_target1/encryptedtarget                                   -
+test_target1/encryptedtarget/test_source2                      encryptionroot  test_target1/encryptedtarget                                   -
+test_target1/encryptedtarget/test_source2/fs2                  encryptionroot  test_target1/encryptedtarget                                   -
+test_target1/encryptedtarget/test_source2/fs2/sub              encryptionroot  test_target1/encryptedtarget                                   -
+test_target1/test_source1                                      encryptionroot  -                                                              -
+test_target1/test_source1/fs1                                  encryptionroot  -                                                              -
+test_target1/test_source1/fs1/encryptedsource                  encryptionroot  test_target1/test_source1/fs1/encryptedsource                  -
+test_target1/test_source1/fs1/sub                              encryptionroot  -                                                              -
+test_target1/test_source2                                      encryptionroot  -                                                              -
+test_target1/test_source2/fs2                                  encryptionroot  -                                                              -
+test_target1/test_source2/fs2/sub                              encryptionroot  -                                                              -
+""")
+
+    def test_reencrypt(self):
+        """reencrypt data (--decrypt --encrypt) """
+
+        self.prepare_encrypted_dataset("11111111", "test_source1/fs1/encryptedsource")
+        self.prepare_encrypted_dataset("22222222", "test_target1/encryptedtarget")
+
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup(
+                "test test_target1 --verbose --no-progress --decrypt --encrypt --debug --allow-empty --exclude-received".split(" ")).run())
+            self.assertFalse(ZfsAutobackup(
+                "test test_target1/encryptedtarget --verbose --no-progress --decrypt --encrypt --debug --no-snapshot --exclude-received".split(
+                    " ")).run())
+
+        with patch('time.strftime', return_value="test-20101111000001"):
+            self.assertFalse(ZfsAutobackup(
+                "test test_target1 --verbose --no-progress --decrypt --encrypt --debug --allow-empty --exclude-received".split(" ")).run())
+            self.assertFalse(ZfsAutobackup(
+                "test test_target1/encryptedtarget --verbose --no-progress --decrypt --encrypt --debug --no-snapshot --exclude-received".split(
+                    " ")).run())
+
+        r = shelltest("zfs get -r -t filesystem encryptionroot test_target1")
+        self.assertEqual(r, """
+NAME                                                           PROPERTY        VALUE                         SOURCE
+test_target1                                                   encryptionroot  -                             -
+test_target1/encryptedtarget                                   encryptionroot  test_target1/encryptedtarget  -
+test_target1/encryptedtarget/test_source1                      encryptionroot  test_target1/encryptedtarget  -
+test_target1/encryptedtarget/test_source1/fs1                  encryptionroot  test_target1/encryptedtarget  -
+test_target1/encryptedtarget/test_source1/fs1/encryptedsource  encryptionroot  test_target1/encryptedtarget  -
+test_target1/encryptedtarget/test_source1/fs1/sub              encryptionroot  test_target1/encryptedtarget  -
+test_target1/encryptedtarget/test_source2                      encryptionroot  test_target1/encryptedtarget  -
+test_target1/encryptedtarget/test_source2/fs2                  encryptionroot  test_target1/encryptedtarget  -
+test_target1/encryptedtarget/test_source2/fs2/sub              encryptionroot  test_target1/encryptedtarget  -
+test_target1/test_source1                                      encryptionroot  -                             -
+test_target1/test_source1/fs1                                  encryptionroot  -                             -
+test_target1/test_source1/fs1/encryptedsource                  encryptionroot  -                             -
+test_target1/test_source1/fs1/sub                              encryptionroot  -                             -
+test_target1/test_source2                                      encryptionroot  -                             -
+test_target1/test_source2/fs2                                  encryptionroot  -                             -
+test_target1/test_source2/fs2/sub                              encryptionroot  -                             -
+""")
+

tests/test_executenode.py

@@ -1,5 +1,5 @@
 from basetest import *
-from zfs_autobackup.ExecuteNode import ExecuteNode
+from zfs_autobackup.ExecuteNode import *
 
 print("THIS TEST REQUIRES SSH TO LOCALHOST")
 
@@ -15,7 +15,7 @@ class TestExecuteNode(unittest2.TestCase):
             self.assertEqual(node.run(["echo","test"]), ["test"])
 
         with self.subTest("error exit code"):
-            with self.assertRaises(subprocess.CalledProcessError):
+            with self.assertRaises(ExecuteError):
                 node.run(["false"])
 
         #
@@ -26,9 +26,9 @@ class TestExecuteNode(unittest2.TestCase):
         with self.subTest("multiline tabsplit"):
             self.assertEqual(node.run(["echo","l1c1\tl1c2\nl2c1\tl2c2"], tab_split=True), [['l1c1', 'l1c2'], ['l2c1', 'l2c2']])
 
-        #escaping test (shouldnt be a problem locally, single quotes can be a problem remote via ssh)
+        #escaping test
         with self.subTest("escape test"):
-            s="><`'\"@&$()$bla\\/.*!#test _+-={}[]|"
+            s="><`'\"@&$()$bla\\/.* !#test _+-={}[]|${bla} $bla"
             self.assertEqual(node.run(["echo",s]), [s])
 
         #return std err as well, trigger stderr by listing something non existing
@@ -51,6 +51,15 @@ class TestExecuteNode(unittest2.TestCase):
         with self.subTest("stdin process with inp=None (shouldn't hang)"):
             self.assertEqual(node.run(["cat"]), [])
 
+        # let the system do the piping with an unescaped |:
+        with self.subTest("system piping test"):
+
+            #first make sure the actual | character is still properly escaped:
+            self.assertEqual(node.run(["echo","|"]), ["|"])
+
+            #now pipe
+            self.assertEqual(node.run(["echo", "abc", node.PIPE, "tr", "a", "A" ]), ["Abc"])
+
     def test_basics_local(self):
         node=ExecuteNode(debug_output=True)
         self.basics(node)
@@ -64,7 +73,7 @@ class TestExecuteNode(unittest2.TestCase):
     def test_readonly(self):
         node=ExecuteNode(debug_output=True, readonly=True)
 
-        self.assertEqual(node.run(["echo","test"], readonly=False), None)
+        self.assertEqual(node.run(["echo","test"], readonly=False), [])
         self.assertEqual(node.run(["echo","test"], readonly=True), ["test"])
 
 
@@ -73,7 +82,7 @@ class TestExecuteNode(unittest2.TestCase):
     def pipe(self, nodea, nodeb):
 
         with self.subTest("pipe data"):
-            output=nodea.run(["dd", "if=/dev/zero", "count=1000"], pipe=True)
+            output=nodea.run(["dd", "if=/dev/zero", "count=1000"],pipe=True)
             self.assertEqual(nodeb.run(["md5sum"], inp=output), ["816df6f64deba63b029ca19d880ee10a  -"])
 
         with self.subTest("exit code both ends of pipe ok"):
@@ -81,31 +90,35 @@ class TestExecuteNode(unittest2.TestCase):
             nodeb.run(["true"], inp=output)
 
         with self.subTest("error on pipe input side"):
-            with self.assertRaises(subprocess.CalledProcessError):
+            with self.assertRaises(ExecuteError):
                 output=nodea.run(["false"], pipe=True)
                 nodeb.run(["true"], inp=output)
 
+        with self.subTest("error on both sides, ignore exit codes"):
+            output=nodea.run(["false"], pipe=True, valid_exitcodes=[])
+            nodeb.run(["false"], inp=output, valid_exitcodes=[])
+
         with self.subTest("error on pipe output side "):
-            with self.assertRaises(subprocess.CalledProcessError):
+            with self.assertRaises(ExecuteError):
                 output=nodea.run(["true"], pipe=True)
                 nodeb.run(["false"], inp=output)
 
         with self.subTest("error on both sides of pipe"):
-            with self.assertRaises(subprocess.CalledProcessError):
+            with self.assertRaises(ExecuteError):
                 output=nodea.run(["false"], pipe=True)
                 nodeb.run(["false"], inp=output)
 
         with self.subTest("check stderr on pipe output side"):
-            output=nodea.run(["true"], pipe=True)
-            (stdout, stderr)=nodeb.run(["ls", "nonexistingfile"], inp=output, return_stderr=True, valid_exitcodes=[0,2])
+            output=nodea.run(["true"], pipe=True, valid_exitcodes=[0])
+            (stdout, stderr)=nodeb.run(["ls", "nonexistingfile"], inp=output, return_stderr=True, valid_exitcodes=[2])
             self.assertEqual(stdout,[])
             self.assertRegex(stderr[0], "nonexistingfile" )
 
         with self.subTest("check stderr on pipe input side (should be only printed)"):
-            output=nodea.run(["ls", "nonexistingfile"], pipe=True)
-            (stdout, stderr)=nodeb.run(["true"], inp=output, return_stderr=True, valid_exitcodes=[0,2])
+            output=nodea.run(["ls", "nonexistingfile"], pipe=True, valid_exitcodes=[2])
+            (stdout, stderr)=nodeb.run(["true"], inp=output, return_stderr=True, valid_exitcodes=[0])
             self.assertEqual(stdout,[])
-            self.assertEqual(stderr,[] )
+            self.assertEqual(stderr,[])
 
 
 

tests/test_externalfailures.py

@@ -1,7 +1,7 @@
 from basetest import *
 
 
-class TestZfsNode(unittest2.TestCase):
+class TestExternalFailures(unittest2.TestCase):
 
     def setUp(self):
         prepare_zpools()
@@ -20,7 +20,7 @@ class TestZfsNode(unittest2.TestCase):
         r = shelltest("dd if=/dev/zero of=/test_target1/waste bs=250M count=1")
 
         # should fail and leave resume token (if supported)
-        self.assertTrue(ZfsAutobackup("test test_target1 --verbose".split(" ")).run())
+        self.assertTrue(ZfsAutobackup("test test_target1 --no-progress --verbose".split(" ")).run())
 
         # free up space
         r = shelltest("rm /test_target1/waste")
@@ -32,13 +32,13 @@ class TestZfsNode(unittest2.TestCase):
     def test_initial_resume(self):
 
         # inital backup, leaves resume token
-        with patch('time.strftime', return_value="20101111000000"):
+        with patch('time.strftime', return_value="test-20101111000000"):
             self.generate_resume()
 
         # --test should resume and succeed
         with OutputIO() as buf:
             with redirect_stdout(buf):
-                self.assertFalse(ZfsAutobackup("test test_target1 --verbose --test".split(" ")).run())
+                self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --test".split(" ")).run())
 
             print(buf.getvalue())
 
@@ -52,7 +52,7 @@ class TestZfsNode(unittest2.TestCase):
         # should resume and succeed
         with OutputIO() as buf:
             with redirect_stdout(buf):
-                self.assertFalse(ZfsAutobackup("test test_target1 --verbose".split(" ")).run())
+                self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose".split(" ")).run())
 
             print(buf.getvalue())
 
@@ -81,17 +81,17 @@ test_target1/test_source2/fs2/sub@test-20101111000000
     def test_incremental_resume(self):
 
         # initial backup
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --allow-empty".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --allow-empty".split(" ")).run())
 
         # incremental backup leaves resume token
-        with patch('time.strftime', return_value="20101111000001"):
+        with patch('time.strftime', return_value="test-20101111000001"):
             self.generate_resume()
 
         # --test should resume and succeed
         with OutputIO() as buf:
             with redirect_stdout(buf):
-                self.assertFalse(ZfsAutobackup("test test_target1 --verbose --test".split(" ")).run())
+                self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --test".split(" ")).run())
 
             print(buf.getvalue())
 
@@ -105,7 +105,7 @@ test_target1/test_source2/fs2/sub@test-20101111000000
         # should resume and succeed
         with OutputIO() as buf:
             with redirect_stdout(buf):
-                self.assertFalse(ZfsAutobackup("test test_target1 --verbose".split(" ")).run())
+                self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose".split(" ")).run())
 
             print(buf.getvalue())
 
@@ -138,7 +138,7 @@ test_target1/test_source2/fs2/sub@test-20101111000000
             self.skipTest("Resume not supported in this ZFS userspace version")
 
         # inital backup, leaves resume token
-        with patch('time.strftime', return_value="20101111000000"):
+        with patch('time.strftime', return_value="test-20101111000000"):
             self.generate_resume()
 
         # remove corresponding source snapshot, so it becomes invalid
@@ -148,12 +148,12 @@ test_target1/test_source2/fs2/sub@test-20101111000000
         shelltest("zfs destroy test_target1/test_source1/fs1/sub; true")
 
         # --test try again, should abort old resume
-        with patch('time.strftime', return_value="20101111000001"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --test".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000001"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --test".split(" ")).run())
 
         # try again, should abort old resume
-        with patch('time.strftime', return_value="20101111000001"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000001"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose".split(" ")).run())
 
         r = shelltest("zfs list -H -o name -r -t all test_target1")
         self.assertMultiLineEqual(r, """
@@ -176,23 +176,23 @@ test_target1/test_source2/fs2/sub@test-20101111000000
             self.skipTest("Resume not supported in this ZFS userspace version")
 
         # initial backup
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --allow-empty".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --allow-empty".split(" ")).run())
 
         # icremental backup, leaves resume token
-        with patch('time.strftime', return_value="20101111000001"):
+        with patch('time.strftime', return_value="test-20101111000001"):
             self.generate_resume()
 
         # remove corresponding source snapshot, so it becomes invalid
         shelltest("zfs destroy test_source1/fs1@test-20101111000001")
 
         # --test try again, should abort old resume
-        with patch('time.strftime', return_value="20101111000002"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --test".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000002"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --test".split(" ")).run())
 
         # try again, should abort old resume
-        with patch('time.strftime', return_value="20101111000002"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000002"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose".split(" ")).run())
 
         r = shelltest("zfs list -H -o name -r -t all test_target1")
         self.assertMultiLineEqual(r, """
@@ -215,23 +215,23 @@ test_target1/test_source2/fs2/sub@test-20101111000000
         if "0.6.5" in ZFS_USERSPACE:
             self.skipTest("Resume not supported in this ZFS userspace version")
 
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose".split(" ")).run())
 
         # generate resume
-        with patch('time.strftime', return_value="20101111000001"):
+        with patch('time.strftime', return_value="test-20101111000001"):
             self.generate_resume()
 
         with OutputIO() as buf:
             with redirect_stdout(buf):
                 # incremental, doesnt want previous anymore
-                with patch('time.strftime', return_value="20101111000002"):
+                with patch('time.strftime', return_value="test-20101111000002"):
                     self.assertFalse(ZfsAutobackup(
-                        "test test_target1 --verbose --keep-target=0 --debug --allow-empty".split(" ")).run())
+                        "test test_target1 --no-progress --verbose --keep-target=0 --allow-empty".split(" ")).run())
 
             print(buf.getvalue())
 
-            self.assertIn(": aborting resume, since", buf.getvalue())
+            self.assertIn("Aborting resume, we dont want that snapshot anymore.", buf.getvalue())
 
         r = shelltest("zfs list -H -o name -r -t all test_target1")
         self.assertMultiLineEqual(r, """
@@ -247,20 +247,68 @@ test_target1/test_source2/fs2/sub
 test_target1/test_source2/fs2/sub@test-20101111000002
 """)
 
+    # test with empty snapshot list (this was a bug)
+    def test_abort_resume_emptysnapshotlist(self):
+
+        if "0.6.5" in ZFS_USERSPACE:
+            self.skipTest("Resume not supported in this ZFS userspace version")
+
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose".split(" ")).run())
+
+        # generate resume
+        with patch('time.strftime', return_value="test-20101111000001"):
+            self.generate_resume()
+
+        shelltest("zfs destroy test_source1/fs1@test-20101111000001")
+
+        with OutputIO() as buf:
+            with redirect_stdout(buf):
+                # incremental, doesnt want previous anymore
+                with patch('time.strftime', return_value="test-20101111000002"):
+                    self.assertFalse(ZfsAutobackup(
+                        "test test_target1 --no-progress --verbose --no-snapshot".split(
+                            " ")).run())
+
+            print(buf.getvalue())
+
+            self.assertIn("Aborting resume, its obsolete", buf.getvalue())
+
+
     def test_missing_common(self):
 
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --allow-empty".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --allow-empty".split(" ")).run())
 
         # remove common snapshot and leave nothing
         shelltest("zfs release zfs_autobackup:test test_source1/fs1@test-20101111000000")
         shelltest("zfs destroy test_source1/fs1@test-20101111000000")
 
-        with patch('time.strftime', return_value="20101111000001"):
-            self.assertTrue(ZfsAutobackup("test test_target1 --verbose --allow-empty".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000001"):
+            self.assertTrue(ZfsAutobackup("test test_target1 --no-progress --verbose --allow-empty".split(" ")).run())
 
-    ############# TODO:
+    #UPDATE: offcourse the one thing that wasn't tested had a bug :(  (in ExecuteNode.run()).
     def test_ignoretransfererrors(self):
 
-        self.skipTest(
-            "todo: create some kind of situation where zfs recv exits with an error but transfer is still ok (happens in practice with acltype)")
+            self.skipTest("Not sure how to implement a test for this without some serious hacking and patching.")
+
+#         #recreate target pool without any features
+#         # shelltest("zfs set compress=on test_source1; zpool destroy test_target1; zpool create test_target1 -o feature@project_quota=disabled /dev/ram2")
+#
+#         with patch('time.strftime', return_value="test-20101111000000"):
+#             self.assertFalse(ZfsAutobackup("test test_target1 --verbose --allow-empty --no-progress".split(" ")).run())
+#
+#         r = shelltest("zfs list -H -o name -r -t all test_target1")
+#
+#         self.assertMultiLineEqual(r, """
+# test_target1
+# test_target1/test_source1
+# test_target1/test_source1/fs1
+# test_target1/test_source1/fs1@test-20101111000002
+# test_target1/test_source1/fs1/sub
+# test_target1/test_source1/fs1/sub@test-20101111000002
+# test_target1/test_source2
+# test_target1/test_source2/fs2
+# test_target1/test_source2/fs2/sub
+# test_target1/test_source2/fs2/sub@test-20101111000002
+#         """)

tests/test_log.py

@@ -0,0 +1,52 @@
+from zfs_autobackup.LogConsole import LogConsole
+from basetest import *
+
+
+class TestLog(unittest2.TestCase):
+
+    def test_colored(self):
+        """test with color output"""
+        with OutputIO() as buf:
+            with redirect_stdout(buf):
+                l= LogConsole(show_verbose=False, show_debug=False, color=True)
+                l.verbose("verbose")
+                l.debug("debug")
+
+            with redirect_stdout(buf):
+                l=LogConsole(show_verbose=True, show_debug=True, color=True)
+                l.verbose("verbose")
+                l.debug("debug")
+
+            with redirect_stderr(buf):
+                l=LogConsole(show_verbose=False, show_debug=False, color=True)
+                l.error("error")
+
+            print(list(buf.getvalue()))
+            self.assertEqual(list(buf.getvalue()), ['\x1b', '[', '2', '2', 'm', ' ', ' ', 'v', 'e', 'r', 'b', 'o', 's', 'e', '\x1b', '[', '0', 'm', '\n', '\x1b', '[', '3', '2', 'm', '#', ' ', 'd', 'e', 'b', 'u', 'g', '\x1b', '[', '0', 'm', '\n', '\x1b', '[', '3', '1', 'm', '\x1b', '[', '1', 'm', '!', ' ', 'e', 'r', 'r', 'o', 'r', '\x1b', '[', '0', 'm', '\n'])
+
+    def test_nocolor(self):
+        """test without color output"""
+
+        with OutputIO() as buf:
+            with redirect_stdout(buf):
+                l=LogConsole(show_verbose=False, show_debug=False, color=False)
+                l.verbose("verbose")
+                l.debug("debug")
+
+            with redirect_stdout(buf):
+                l=LogConsole(show_verbose=True, show_debug=True, color=False)
+                l.verbose("verbose")
+                l.debug("debug")
+
+            with redirect_stderr(buf):
+                l=LogConsole(show_verbose=False, show_debug=False, color=False)
+                l.error("error")
+
+            print(list(buf.getvalue()))
+            self.assertEqual(list(buf.getvalue()), [' ', ' ', 'v', 'e', 'r', 'b', 'o', 's', 'e', '\n', '#', ' ', 'd', 'e', 'b', 'u', 'g', '\n', '!', ' ', 'e', 'r', 'r', 'o', 'r', '\n'])
+
+
+        # zfs_autobackup.LogConsole.colorama=False
+
+
+

tests/test_regressions.py

@@ -8,12 +8,98 @@ class TestZfsNode(unittest2.TestCase):
         prepare_zpools()
         self.longMessage=True
 
-    # #resume initial backup
-    # def test_keepsource0(self):
+    def test_keepsource0target10queuedsend(self):
+        """Test if thinner doesnt destroy too much early on if there are no common snapshots YET. Issue #84"""
+
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup(
+                "test test_target1 --no-progress --verbose --keep-source=0 --keep-target=10 --allow-empty --no-send".split(
+                    " ")).run())
+
+        with patch('time.strftime', return_value="test-20101111000001"):
+            self.assertFalse(ZfsAutobackup(
+                "test test_target1 --no-progress --verbose --keep-source=0 --keep-target=10 --allow-empty --no-send".split(
+                    " ")).run())
+
+        with patch('time.strftime', return_value="test-20101111000002"):
+            self.assertFalse(ZfsAutobackup(
+                "test test_target1 --no-progress --verbose --keep-source=0 --keep-target=10 --allow-empty".split(
+                    " ")).run())
+
+        r = shelltest("zfs list -H -o name -r -t all " + TEST_POOLS)
+        self.assertMultiLineEqual(r, """
+test_source1
+test_source1/fs1
+test_source1/fs1@test-20101111000002
+test_source1/fs1/sub
+test_source1/fs1/sub@test-20101111000002
+test_source2
+test_source2/fs2
+test_source2/fs2/sub
+test_source2/fs2/sub@test-20101111000002
+test_source2/fs3
+test_source2/fs3/sub
+test_target1
+test_target1/test_source1
+test_target1/test_source1/fs1
+test_target1/test_source1/fs1@test-20101111000000
+test_target1/test_source1/fs1@test-20101111000001
+test_target1/test_source1/fs1@test-20101111000002
+test_target1/test_source1/fs1/sub
+test_target1/test_source1/fs1/sub@test-20101111000000
+test_target1/test_source1/fs1/sub@test-20101111000001
+test_target1/test_source1/fs1/sub@test-20101111000002
+test_target1/test_source2
+test_target1/test_source2/fs2
+test_target1/test_source2/fs2/sub
+test_target1/test_source2/fs2/sub@test-20101111000000
+test_target1/test_source2/fs2/sub@test-20101111000001
+test_target1/test_source2/fs2/sub@test-20101111000002
+""")
+
+
+    def test_excludepaths(self):
+        """Test issue #103"""
+
+        shelltest("zfs create test_target1/target_shouldnotbeexcluded")
+        shelltest("zfs set autobackup:test=true test_target1/target_shouldnotbeexcluded")
+        shelltest("zfs create test_target1/target")
+
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup(
+                "test test_target1/target --no-progress --verbose --allow-empty".split(
+                    " ")).run())
+
+
+        r = shelltest("zfs list -H -o name -r -t all " + TEST_POOLS)
+        self.assertMultiLineEqual(r, """
+test_source1
+test_source1/fs1
+test_source1/fs1@test-20101111000000
+test_source1/fs1/sub
+test_source1/fs1/sub@test-20101111000000
+test_source2
+test_source2/fs2
+test_source2/fs2/sub
+test_source2/fs2/sub@test-20101111000000
+test_source2/fs3
+test_source2/fs3/sub
+test_target1
+test_target1/target
+test_target1/target/test_source1
+test_target1/target/test_source1/fs1
+test_target1/target/test_source1/fs1@test-20101111000000
+test_target1/target/test_source1/fs1/sub
+test_target1/target/test_source1/fs1/sub@test-20101111000000
+test_target1/target/test_source2
+test_target1/target/test_source2/fs2
+test_target1/target/test_source2/fs2/sub
+test_target1/target/test_source2/fs2/sub@test-20101111000000
+test_target1/target/test_target1
+test_target1/target/test_target1/target_shouldnotbeexcluded
+test_target1/target/test_target1/target_shouldnotbeexcluded@test-20101111000000
+test_target1/target_shouldnotbeexcluded
+test_target1/target_shouldnotbeexcluded@test-20101111000000
+""")
 
-    #     #somehow only specifying --allow-empty --keep-source 0 failed:
-    #     with patch('time.strftime', return_value="20101111000000"):
-    #         self.assertFalse(ZfsAutobackup("test test_target1 --verbose --allow-empty --keep-source 0".split(" ")).run())
 
-    #     with patch('time.strftime', return_value="20101111000001"):
-    #         self.assertFalse(ZfsAutobackup("test test_target1 --verbose --allow-empty --keep-source 0".split(" ")).run())

tests/test_scaling.py

@@ -33,8 +33,8 @@ class TestZfsScaling(unittest2.TestCase):
         run_counter=0
         with patch.object(ExecuteNode,'run', run_count) as p:
 
-            with patch('time.strftime', return_value="20101112000000"):
-                self.assertFalse(ZfsAutobackup("test test_target1 --verbose --keep-source=10000 --keep-target=10000 --no-holds --allow-empty".split(" ")).run())
+            with patch('time.strftime', return_value="test-20101112000000"):
+                self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --keep-source=10000 --keep-target=10000 --no-holds --allow-empty".split(" ")).run())
 
 
             #this triggers if you make a change with an impact of more than O(snapshot_count/2)
@@ -46,8 +46,8 @@ class TestZfsScaling(unittest2.TestCase):
         run_counter=0
         with patch.object(ExecuteNode,'run', run_count) as p:
 
-            with patch('time.strftime', return_value="20101112000001"):
-                self.assertFalse(ZfsAutobackup("test test_target1 --verbose --keep-source=10000 --keep-target=10000 --no-holds --allow-empty".split(" ")).run())
+            with patch('time.strftime', return_value="test-20101112000001"):
+                self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --keep-source=10000 --keep-target=10000 --no-holds --allow-empty".split(" ")).run())
 
 
             #this triggers if you make a change with a performance impact of more than O(snapshot_count/2)
@@ -69,11 +69,12 @@ class TestZfsScaling(unittest2.TestCase):
 
         global run_counter
 
+        #first run
         run_counter=0
         with patch.object(ExecuteNode,'run', run_count) as p:
 
-            with patch('time.strftime', return_value="20101112000000"):
-                self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-holds --allow-empty".split(" ")).run())
+            with patch('time.strftime', return_value="test-20101112000000"):
+                self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --no-holds --allow-empty".split(" ")).run())
 
 
             #this triggers if you make a change with an impact of more than O(snapshot_count/2)
@@ -82,11 +83,12 @@ class TestZfsScaling(unittest2.TestCase):
             self.assertLess(abs(run_counter-expected_runs), dataset_count/2)
 
 
+        #second run, should have higher number of expected_runs
         run_counter=0
         with patch.object(ExecuteNode,'run', run_count) as p:
 
-            with patch('time.strftime', return_value="20101112000001"):
-                self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-holds --allow-empty".split(" ")).run())
+            with patch('time.strftime', return_value="test-20101112000001"):
+                self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --no-holds --allow-empty".split(" ")).run())
 
 
             #this triggers if you make a change with a performance impact of more than O(snapshot_count/2)

tests/test_sendrecvpipes.py

@@ -0,0 +1,88 @@
+import zfs_autobackup.compressors
+from basetest import *
+import time
+
+class TestSendRecvPipes(unittest2.TestCase):
+    """test input/output pipes for zfs send and recv"""
+
+    def setUp(self):
+        prepare_zpools()
+        self.longMessage=True
+
+
+
+    def test_send_basics(self):
+        """send basics (remote/local send pipe)"""
+
+
+        with self.subTest("local local pipe"):
+            with patch('time.strftime', return_value="test-20101111000000"):
+                self.assertFalse(ZfsAutobackup(["test", "test_target1", "--exclude-received", "--no-holds", "--no-progress", "--send-pipe=dd bs=1M",  "--recv-pipe=dd bs=2M"]).run())
+
+            shelltest("zfs destroy -r test_target1/test_source1/fs1/sub")
+
+        with self.subTest("remote local pipe"):
+            with patch('time.strftime', return_value="test-20101111000000"):
+                self.assertFalse(ZfsAutobackup(["test", "test_target1", "--exclude-received", "--no-holds", "--no-progress", "--ssh-source=localhost", "--send-pipe=dd bs=1M",  "--recv-pipe=dd bs=2M"]).run())
+
+            shelltest("zfs destroy -r test_target1/test_source1/fs1/sub")
+
+        with self.subTest("local remote pipe"):
+            with patch('time.strftime', return_value="test-20101111000000"):
+                self.assertFalse(ZfsAutobackup(["test", "test_target1",  "--exclude-received", "--no-holds", "--no-progress", "--ssh-target=localhost", "--send-pipe=dd bs=1M",  "--recv-pipe=dd bs=2M"]).run())
+
+            shelltest("zfs destroy -r test_target1/test_source1/fs1/sub")
+
+        with self.subTest("remote remote pipe"):
+            with patch('time.strftime', return_value="test-20101111000000"):
+                self.assertFalse(ZfsAutobackup(["test", "test_target1",  "--exclude-received", "--no-holds", "--no-progress", "--ssh-source=localhost", "--ssh-target=localhost", "--send-pipe=dd bs=1M",  "--recv-pipe=dd bs=2M"]).run())
+
+    def test_compress(self):
+        """send basics (remote/local send pipe)"""
+
+        for compress in zfs_autobackup.compressors.COMPRESS_CMDS.keys():
+
+            with self.subTest("compress "+compress):
+                with patch('time.strftime', return_value="test-20101111000000"):
+                    self.assertFalse(ZfsAutobackup(["test", "test_target1", "--exclude-received", "--no-holds", "--no-progress", "--compress="+compress]).run())
+
+                shelltest("zfs destroy -r test_target1/test_source1/fs1/sub")
+
+    def test_buffer(self):
+        """test different buffer configurations"""
+
+
+        with self.subTest("local local pipe"):
+            with patch('time.strftime', return_value="test-20101111000000"):
+                self.assertFalse(ZfsAutobackup(["test", "test_target1", "--exclude-received", "--no-holds", "--no-progress", "--buffer=1M" ]).run())
+
+            shelltest("zfs destroy -r test_target1/test_source1/fs1/sub")
+
+        with self.subTest("remote local pipe"):
+            with patch('time.strftime', return_value="test-20101111000000"):
+                self.assertFalse(ZfsAutobackup(["test", "test_target1", "--exclude-received", "--no-holds", "--no-progress", "--ssh-source=localhost", "--buffer=1M"]).run())
+
+            shelltest("zfs destroy -r test_target1/test_source1/fs1/sub")
+
+        with self.subTest("local remote pipe"):
+            with patch('time.strftime', return_value="test-20101111000000"):
+                self.assertFalse(ZfsAutobackup(["test", "test_target1",  "--exclude-received", "--no-holds", "--no-progress", "--ssh-target=localhost", "--buffer=1M"]).run())
+
+            shelltest("zfs destroy -r test_target1/test_source1/fs1/sub")
+
+        with self.subTest("remote remote pipe"):
+            with patch('time.strftime', return_value="test-20101111000000"):
+                self.assertFalse(ZfsAutobackup(["test", "test_target1",  "--exclude-received", "--no-holds", "--no-progress", "--ssh-source=localhost", "--ssh-target=localhost", "--buffer=1M"]).run())
+
+    def test_rate(self):
+        """test rate limit"""
+
+
+        start=time.time()
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup(["test", "test_target1", "--exclude-received", "--no-holds", "--no-progress", "--rate=50k" ]).run())
+
+        #not a great way of verifying but it works.
+        self.assertGreater(time.time()-start, 5)
+
+

tests/test_thinner.py

@@ -3,7 +3,7 @@ import pprint
 
 from zfs_autobackup.Thinner import Thinner
 
-#randint is different in python 2 vs 3
+# randint is different in python 2 vs 3
 randint_compat = lambda lo, hi: lo + int(random.random() * (hi + 1 - lo))
 
 
@@ -23,6 +23,23 @@ class TestThinner(unittest2.TestCase):
 
         # return super().setUp()
 
+    def test_exceptions(self):
+        with self.assertRaisesRegexp(Exception, "^Invalid period"):
+            ThinnerRule("12X12m")
+
+        with self.assertRaisesRegexp(Exception, "^Invalid ttl"):
+            ThinnerRule("12d12X")
+
+        with self.assertRaisesRegexp(Exception, "^Period cant be"):
+            ThinnerRule("12d1d")
+
+        with self.assertRaisesRegexp(Exception, "^Invalid schedule"):
+            ThinnerRule("XXX")
+
+        with self.assertRaisesRegexp(Exception, "^Number of"):
+            Thinner("-1")
+
+
     def test_incremental(self):
         ok=['2023-01-03 10:53:16',
             '2024-01-02 15:43:29',
@@ -138,5 +155,5 @@ class TestThinner(unittest2.TestCase):
         self.assertEqual(result, ok)
 
 
-if __name__ == '__main__':
-    unittest.main()
+# if __name__ == '__main__':
+#     unittest.main()

tests/test_verify.py

@@ -0,0 +1,99 @@
+
+from basetest import *
+
+
+# test zfs-verify:
+# - when there is no common snapshot at all
+# - when encryption key not loaded
+# - --test mode
+# - --fs-compare methods
+# - on snapshots of datasets:
+#   - that are correct
+#   - that are different
+# - on snapshots of zvols
+#  - that are correct
+#  - that are different
+# - test all directions (local, remote/local, local/remote, remote/remote)
+#
+
+class TestZfsEncryption(unittest2.TestCase):
+
+
+    def setUp(self):
+        prepare_zpools()
+
+        #create actual test files and data
+        shelltest("zfs create test_source1/fs1/ok_filesystem")
+        shelltest("cp tests/*.py /test_source1/fs1/ok_filesystem")
+
+        shelltest("zfs create test_source1/fs1/bad_filesystem")
+        shelltest("cp tests/*.py /test_source1/fs1/bad_filesystem")
+
+        shelltest("zfs create -V 1M test_source1/fs1/ok_zvol")
+        shelltest("dd if=/dev/urandom of=/dev/zvol/test_source1/fs1/ok_zvol count=1 bs=512k")
+
+        shelltest("zfs create -V 1M test_source1/fs1/bad_zvol")
+        shelltest("dd if=/dev/urandom of=/dev/zvol/test_source1/fs1/bad_zvol count=1 bs=512k")
+
+        #create backup
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-progress --no-holds".split(" ")).run())
+
+        #Do an ugly hack to create a fault in the bad filesystem
+        #In zfs-autoverify it doenst matter that the snapshot isnt actually the same snapshot, so this hack works
+        shelltest("zfs destroy test_target1/test_source1/fs1/bad_filesystem@test-20101111000000")
+        shelltest("zfs mount test_target1/test_source1/fs1/bad_filesystem")
+        shelltest("echo >> /test_target1/test_source1/fs1/bad_filesystem/test_verify.py")
+        shelltest("zfs snapshot test_target1/test_source1/fs1/bad_filesystem@test-20101111000000")
+
+        #do the same hack for the bad zvol
+        shelltest("zfs destroy test_target1/test_source1/fs1/bad_zvol@test-20101111000000")
+        shelltest("dd if=/dev/urandom of=/dev/zvol/test_target1/test_source1/fs1/bad_zvol count=1 bs=1")
+        shelltest("zfs snapshot test_target1/test_source1/fs1/bad_zvol@test-20101111000000")
+
+
+        # make sure we cant accidently compare current data
+        shelltest("zfs mount test_target1/test_source1/fs1/ok_filesystem")
+        shelltest("rm /test_source1/fs1/ok_filesystem/*")
+        shelltest("rm /test_source1/fs1/bad_filesystem/*")
+        shelltest("dd if=/dev/zero of=/dev/zvol/test_source1/fs1/ok_zvol count=1 bs=512k")
+
+
+
+    def test_verify(self):
+
+
+        with self.subTest("default --test"):
+            self.assertFalse(ZfsAutoverify("test test_target1 --verbose --test".split(" ")).run())
+
+        with self.subTest("rsync, remote source and target. (not supported, all 6 fail)"):
+            self.assertEqual(6, ZfsAutoverify("test test_target1 --ssh-source=localhost --ssh-target=localhost --verbose --exclude-received --fs-compare=rsync".split(" ")).run())
+
+        def runchecked(testname, command):
+            with self.subTest(testname):
+                with OutputIO() as buf:
+                    result=None
+                    with redirect_stderr(buf):
+                        result=ZfsAutoverify(command.split(" ")).run()
+
+                    print(buf.getvalue())
+                    self.assertEqual(2,result)
+                    self.assertRegex(buf.getvalue(), "bad_filesystem: FAILED:")
+                    self.assertRegex(buf.getvalue(), "bad_zvol: FAILED:")
+
+        runchecked("rsync, remote source", "test test_target1 --ssh-source=localhost --verbose --exclude-received --fs-compare=rsync")
+        runchecked("rsync, remote target", "test test_target1 --ssh-target=localhost --verbose --exclude-received --fs-compare=rsync")
+        runchecked("rsync, local", "test test_target1 --verbose --exclude-received --fs-compare=rsync")
+
+        runchecked("tar, remote source and remote target",
+                   "test test_target1 --ssh-source=localhost --ssh-target=localhost --verbose --exclude-received --fs-compare=tar")
+        runchecked("tar, remote source",
+                   "test test_target1 --ssh-source=localhost --verbose --exclude-received --fs-compare=tar")
+        runchecked("tar, remote target",
+                   "test test_target1 --ssh-target=localhost --verbose --exclude-received --fs-compare=tar")
+        runchecked("tar, local", "test test_target1 --verbose --exclude-received --fs-compare=tar")
+
+        with self.subTest("no common snapshot"):
+            #destroy common snapshot, now 3 should fail
+            shelltest("zfs destroy test_source1/fs1/ok_zvol@test-20101111000000")
+            self.assertEqual(3, ZfsAutoverify("test test_target1 --verbose --exclude-received".split(" ")).run())

tests/test_zfsautobackup.py

@@ -1,6 +1,9 @@
+from zfs_autobackup.CmdPipe import CmdPipe
+
 from basetest import *
 import time
 
+from zfs_autobackup.LogConsole import  LogConsole
 
 
 class TestZfsAutobackup(unittest2.TestCase):
@@ -11,13 +14,29 @@ class TestZfsAutobackup(unittest2.TestCase):
 
     def test_invalidpars(self):
 
-        self.assertEqual(ZfsAutobackup("test test_target1 --keep-source -1".split(" ")).run(), 255)
+        self.assertEqual(ZfsAutobackup("test test_target1 --no-progress --keep-source -1".split(" ")).run(), 255)
+
+        with OutputIO() as buf:
+            with redirect_stdout(buf):
+                self.assertEqual(ZfsAutobackup("test test_target1 --no-progress --resume --verbose --no-snapshot".split(" ")).run(), 0)
+
+            print(buf.getvalue())
+            self.assertIn("The --resume", buf.getvalue())
+
+        with OutputIO() as buf:
+            with redirect_stderr(buf):
+                self.assertEqual(ZfsAutobackup("test test_target_nonexisting --no-progress".split(" ")).run(), 255)
+
+            print(buf.getvalue())
+            # correct message?
+            self.assertIn("Please create this dataset", buf.getvalue())
+
 
     def  test_snapshotmode(self):
         """test snapshot tool mode"""
 
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test --verbose".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test --no-progress --verbose".split(" ")).run())
 
         r=shelltest("zfs list -H -o name -r -t all "+TEST_POOLS)
         self.assertMultiLineEqual(r,"""
@@ -35,15 +54,13 @@ test_source2/fs3/sub
 test_target1
 """)
 
-
-
     def  test_defaults(self):
 
         with self.subTest("no datasets selected"):
             with OutputIO() as buf:
                 with redirect_stderr(buf):
-                    with patch('time.strftime', return_value="20101111000000"):
-                        self.assertTrue(ZfsAutobackup("nonexisting test_target1 --verbose --debug".split(" ")).run())
+                    with patch('time.strftime', return_value="test-20101111000000"):
+                        self.assertTrue(ZfsAutobackup("nonexisting test_target1 --verbose --debug --no-progress".split(" ")).run())
 
                 print(buf.getvalue())
                 #correct message?
@@ -52,8 +69,8 @@ test_target1
 
         with self.subTest("defaults with full verbose and debug"):
 
-            with patch('time.strftime', return_value="20101111000000"):
-                self.assertFalse(ZfsAutobackup("test test_target1 --verbose --debug".split(" ")).run())
+            with patch('time.strftime', return_value="test-20101111000000"):
+                self.assertFalse(ZfsAutobackup("test test_target1 --verbose --debug --no-progress".split(" ")).run())
 
             r=shelltest("zfs list -H -o name -r -t all "+TEST_POOLS)
             self.assertMultiLineEqual(r,"""
@@ -81,8 +98,8 @@ test_target1/test_source2/fs2/sub@test-20101111000000
 """)
 
         with self.subTest("bare defaults, allow empty"):
-            with patch('time.strftime', return_value="20101111000001"):
-                self.assertFalse(ZfsAutobackup("test test_target1 --allow-empty".split(" ")).run())
+            with patch('time.strftime', return_value="test-20101111000001"):
+                self.assertFalse(ZfsAutobackup("test test_target1 --allow-empty --no-progress".split(" ")).run())
 
 
             r=shelltest("zfs list -H -o name -r -t all "+TEST_POOLS)
@@ -152,15 +169,15 @@ test_target1/test_source2/fs2/sub@test-20101111000001  userrefs  1         -
 
         #make sure time handling is correctly. try to make snapshots a year appart and verify that only snapshots mostly 1y old are kept
         with self.subTest("test time checking"):
-            with patch('time.strftime', return_value="20111111000000"):
-                self.assertFalse(ZfsAutobackup("test test_target1 --allow-empty --verbose".split(" ")).run())
+            with patch('time.strftime', return_value="test-20111111000000"):
+                self.assertFalse(ZfsAutobackup("test test_target1 --allow-empty --verbose --no-progress".split(" ")).run())
 
 
             time_str="20111112000000" #month in the "future"
             future_timestamp=time_secs=time.mktime(time.strptime(time_str,"%Y%m%d%H%M%S"))
             with patch('time.time', return_value=future_timestamp):
-                with patch('time.strftime', return_value="20111111000001"):
-                    self.assertFalse(ZfsAutobackup("test test_target1 --allow-empty --verbose --keep-source 1y1y --keep-target 1d1y".split(" ")).run())
+                with patch('time.strftime', return_value="test-20111111000001"):
+                    self.assertFalse(ZfsAutobackup("test test_target1 --allow-empty --verbose --keep-source 1y1y --keep-target 1d1y --no-progress".split(" ")).run())
 
 
             r=shelltest("zfs list -H -o name -r -t all "+TEST_POOLS)
@@ -194,14 +211,13 @@ test_target1/test_source2/fs2/sub@test-20111111000000
 test_target1/test_source2/fs2/sub@test-20111111000001
 """)
 
-
     def  test_ignore_othersnaphots(self):
 
         r=shelltest("zfs snapshot test_source1/fs1@othersimple")
         r=shelltest("zfs snapshot test_source1/fs1@otherdate-20001111000000")
 
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose".split(" ")).run())
 
             r=shelltest("zfs list -H -o name -r -t all "+TEST_POOLS)
             self.assertMultiLineEqual(r,"""
@@ -235,8 +251,8 @@ test_target1/test_source2/fs2/sub@test-20101111000000
         r=shelltest("zfs snapshot test_source1/fs1@othersimple")
         r=shelltest("zfs snapshot test_source1/fs1@otherdate-20001111000000")
 
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --other-snapshots".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --other-snapshots".split(" ")).run())
 
             r=shelltest("zfs list -H -o name -r -t all "+TEST_POOLS)
             self.assertMultiLineEqual(r,"""
@@ -270,8 +286,8 @@ test_target1/test_source2/fs2/sub@test-20101111000000
 
     def  test_nosnapshot(self):
 
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-snapshot".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-snapshot --no-progress".split(" ")).run())
 
             r=shelltest("zfs list -H -o name -r -t all "+TEST_POOLS)
             #(only parents are created )
@@ -294,12 +310,10 @@ test_target1/test_source2/fs2
 
     def  test_nosend(self):
 
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-send".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-send --no-progress".split(" ")).run())
 
             r=shelltest("zfs list -H -o name -r -t all "+TEST_POOLS)
-            #(only parents are created )
-            #TODO: it probably shouldn't create these
             self.assertMultiLineEqual(r,"""
 test_source1
 test_source1/fs1
@@ -319,12 +333,10 @@ test_target1
     def  test_ignorereplicated(self):
         r=shelltest("zfs snapshot test_source1/fs1@otherreplication")
 
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --ignore-replicated".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --ignore-replicated".split(" ")).run())
 
             r=shelltest("zfs list -H -o name -r -t all "+TEST_POOLS)
-            #(only parents are created )
-            #TODO: it probably shouldn't create these
             self.assertMultiLineEqual(r,"""
 test_source1
 test_source1/fs1
@@ -350,8 +362,8 @@ test_target1/test_source2/fs2/sub@test-20101111000000
 
     def  test_noholds(self):
 
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-holds".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --no-holds --no-progress".split(" ")).run())
 
             r=shelltest("zfs get -r userrefs test_source1 test_source2 test_target1")
             self.assertMultiLineEqual(r,"""
@@ -382,8 +394,8 @@ test_target1/test_source2/fs2/sub@test-20101111000000  userrefs  0         -
 
     def  test_strippath(self):
 
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --strip-path=1".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --strip-path=1 --no-progress".split(" ")).run())
 
             r=shelltest("zfs list -H -o name -r -t all "+TEST_POOLS)
             self.assertMultiLineEqual(r,"""
@@ -408,6 +420,33 @@ test_target1/fs2/sub
 test_target1/fs2/sub@test-20101111000000
 """)
 
+#     def test_strippath_toomuch(self):
+#         with patch('time.strftime', return_value="test-20101111000000"):
+#             self.assertFalse(
+#                 ZfsAutobackup("test test_target1 --verbose --strip-path=2 --no-progress".split(" ")).run())
+#
+#             r = shelltest("zfs list -H -o name -r -t all " + TEST_POOLS)
+#             self.assertMultiLineEqual(r, """
+# test_source1
+# test_source1/fs1
+# test_source1/fs1@test-20101111000000
+# test_source1/fs1/sub
+# test_source1/fs1/sub@test-20101111000000
+# test_source2
+# test_source2/fs2
+# test_source2/fs2/sub
+# test_source2/fs2/sub@test-20101111000000
+# test_source2/fs3
+# test_source2/fs3/sub
+# test_target1
+# test_target1/fs1
+# test_target1/fs1@test-20101111000000
+# test_target1/fs1/sub
+# test_target1/fs1/sub@test-20101111000000
+# test_target1/fs2
+# test_target1/fs2/sub
+# test_target1/fs2/sub@test-20101111000000
+# """)
 
     def  test_clearrefres(self):
 
@@ -418,8 +457,8 @@ test_target1/fs2/sub@test-20101111000000
 
         r=shelltest("zfs set refreservation=1M test_source1/fs1")
 
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --clear-refreservation".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --clear-refreservation".split(" ")).run())
 
             r=shelltest("zfs get refreservation -r test_source1 test_source2 test_target1")
             self.assertMultiLineEqual(r,"""
@@ -456,8 +495,8 @@ test_target1/test_source2/fs2/sub@test-20101111000000  refreservation  -
             self.skipTest("This zfs-userspace version doesnt support -o")
 
 
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --clear-mountpoint --debug".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --clear-mountpoint --debug".split(" ")).run())
 
             r=shelltest("zfs get canmount -r test_source1 test_source2 test_target1")
             self.assertMultiLineEqual(r,"""
@@ -489,35 +528,35 @@ test_target1/test_source2/fs2/sub@test-20101111000000  canmount  -         -
     def  test_rollback(self):
 
         #initial backup
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose".split(" ")).run())
 
         #make change
         r=shelltest("zfs mount test_target1/test_source1/fs1")
         r=shelltest("touch /test_target1/test_source1/fs1/change.txt")
 
-        with patch('time.strftime', return_value="20101111000001"):
+        with patch('time.strftime', return_value="test-20101111000001"):
             #should fail (busy)
-            self.assertTrue(ZfsAutobackup("test test_target1 --verbose --allow-empty".split(" ")).run())
+            self.assertTrue(ZfsAutobackup("test test_target1 --no-progress --verbose --allow-empty".split(" ")).run())
 
-        with patch('time.strftime', return_value="20101111000002"):
+        with patch('time.strftime', return_value="test-20101111000002"):
             #rollback, should succeed
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --allow-empty --rollback".split(" ")).run())
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --allow-empty --rollback".split(" ")).run())
 
 
     def  test_destroyincompat(self):
 
         #initial backup
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose".split(" ")).run())
 
         #add multiple compatible snapshot (written is still 0)
         r=shelltest("zfs snapshot test_target1/test_source1/fs1@compatible1")
         r=shelltest("zfs snapshot test_target1/test_source1/fs1@compatible2")
 
-        with patch('time.strftime', return_value="20101111000001"):
+        with patch('time.strftime', return_value="test-20101111000001"):
             #should be ok, is compatible
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --allow-empty".split(" ")).run())
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --allow-empty".split(" ")).run())
 
         #add incompatible snapshot by changing and snapshotting
         r=shelltest("zfs mount test_target1/test_source1/fs1")
@@ -525,22 +564,46 @@ test_target1/test_source2/fs2/sub@test-20101111000000  canmount  -         -
         r=shelltest("zfs snapshot test_target1/test_source1/fs1@incompatible1")
 
 
-        with patch('time.strftime', return_value="20101111000002"):
+        with patch('time.strftime', return_value="test-20101111000002"):
             #--test should fail, now incompatible
-            self.assertTrue(ZfsAutobackup("test test_target1 --verbose --allow-empty --test".split(" ")).run())
+            self.assertTrue(ZfsAutobackup("test test_target1 --no-progress --verbose --allow-empty --test".split(" ")).run())
 
-        with patch('time.strftime', return_value="20101111000002"):
+        with patch('time.strftime', return_value="test-20101111000002"):
             #should fail, now incompatible
-            self.assertTrue(ZfsAutobackup("test test_target1 --verbose --allow-empty".split(" ")).run())
+            self.assertTrue(ZfsAutobackup("test test_target1 --no-progress --verbose --allow-empty".split(" ")).run())
 
-        with patch('time.strftime', return_value="20101111000003"):
+        with patch('time.strftime', return_value="test-20101111000003"):
             #--test should succeed by destroying incompatibles
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --allow-empty --destroy-incompatible --test".split(" ")).run())
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --allow-empty --destroy-incompatible --test".split(" ")).run())
 
-        with patch('time.strftime', return_value="20101111000003"):
+        with patch('time.strftime', return_value="test-20101111000003"):
             #should succeed by destroying incompatibles
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --allow-empty --destroy-incompatible".split(" ")).run())
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --allow-empty --destroy-incompatible".split(" ")).run())
 
+        r = shelltest("zfs list -H -o name -r -t all test_target1")
+        self.assertMultiLineEqual(r, """
+test_target1
+test_target1/test_source1
+test_target1/test_source1/fs1
+test_target1/test_source1/fs1@test-20101111000000
+test_target1/test_source1/fs1@compatible1
+test_target1/test_source1/fs1@compatible2
+test_target1/test_source1/fs1@test-20101111000001
+test_target1/test_source1/fs1@test-20101111000002
+test_target1/test_source1/fs1@test-20101111000003
+test_target1/test_source1/fs1/sub
+test_target1/test_source1/fs1/sub@test-20101111000000
+test_target1/test_source1/fs1/sub@test-20101111000001
+test_target1/test_source1/fs1/sub@test-20101111000002
+test_target1/test_source1/fs1/sub@test-20101111000003
+test_target1/test_source2
+test_target1/test_source2/fs2
+test_target1/test_source2/fs2/sub
+test_target1/test_source2/fs2/sub@test-20101111000000
+test_target1/test_source2/fs2/sub@test-20101111000001
+test_target1/test_source2/fs2/sub@test-20101111000002
+test_target1/test_source2/fs2/sub@test-20101111000003
+""")
 
 
 
@@ -551,14 +614,14 @@ test_target1/test_source2/fs2/sub@test-20101111000000  canmount  -         -
 
         #test all ssh directions
 
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --allow-empty --ssh-source localhost".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --allow-empty --ssh-source localhost --exclude-received".split(" ")).run())
 
-        with patch('time.strftime', return_value="20101111000001"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --allow-empty --ssh-target localhost".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000001"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --allow-empty --ssh-target localhost --exclude-received".split(" ")).run())
 
-        with patch('time.strftime', return_value="20101111000002"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --allow-empty --ssh-source localhost --ssh-target localhost".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000002"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --allow-empty --ssh-source localhost --ssh-target localhost".split(" ")).run())
 
 
         r=shelltest("zfs list -H -o name -r -t all "+TEST_POOLS)
@@ -602,8 +665,8 @@ test_target1/test_source2/fs2/sub@test-20101111000002
     def  test_minchange(self):
 
         #initial
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --min-change 100000".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --min-change 100000".split(" ")).run())
 
         #make small change, use umount to reflect the changes immediately
         r=shelltest("zfs set compress=off test_source1")
@@ -612,16 +675,16 @@ test_target1/test_source2/fs2/sub@test-20101111000002
 
 
         #too small change, takes no snapshots
-        with patch('time.strftime', return_value="20101111000001"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --min-change 100000".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000001"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --min-change 100000".split(" ")).run())
 
         #make big change
         r=shelltest("dd if=/dev/zero of=/test_source1/fs1/change.txt bs=200000 count=1")
         r=shelltest("zfs umount test_source1/fs1; zfs mount test_source1/fs1")
 
         #bigger change, should take snapshot
-        with patch('time.strftime', return_value="20101111000002"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --min-change 100000".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000002"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --min-change 100000".split(" ")).run())
 
         r=shelltest("zfs list -H -o name -r -t all "+TEST_POOLS)
         self.assertMultiLineEqual(r,"""
@@ -653,8 +716,8 @@ test_target1/test_source2/fs2/sub@test-20101111000000
     def  test_test(self):
 
         #initial
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --test".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --test".split(" ")).run())
 
         r=shelltest("zfs list -H -o name -r -t all "+TEST_POOLS)
         self.assertMultiLineEqual(r,"""
@@ -670,13 +733,13 @@ test_target1
 """)
 
         #actual make initial backup
-        with patch('time.strftime', return_value="20101111000001"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000001"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose".split(" ")).run())
 
 
         #test incremental
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --test".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000002"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --allow-empty --verbose --test".split(" ")).run())
 
         r=shelltest("zfs list -H -o name -r -t all "+TEST_POOLS)
         self.assertMultiLineEqual(r,"""
@@ -711,8 +774,8 @@ test_target1/test_source2/fs2/sub@test-20101111000001
         shelltest("zfs create test_target1/test_source1")
         shelltest("zfs send  test_source1/fs1@migrate1| zfs recv test_target1/test_source1/fs1")
 
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose".split(" ")).run())
 
         r=shelltest("zfs list -H -o name -r -t all "+TEST_POOLS)
         self.assertMultiLineEqual(r,"""
@@ -744,16 +807,16 @@ test_target1/test_source2/fs2/sub@test-20101111000000
     def test_keep0(self):
         """test if keep-source=0 and keep-target=0 dont delete common snapshot and break backup"""
 
-        with patch('time.strftime', return_value="20101111000000"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --keep-source=0 --keep-target=0".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --keep-source=0 --keep-target=0".split(" ")).run())
 
         #make snapshot, shouldnt delete 0
-        with patch('time.strftime', return_value="20101111000001"):
-            self.assertFalse(ZfsAutobackup("test --verbose --keep-source=0 --keep-target=0 --allow-empty".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000001"):
+            self.assertFalse(ZfsAutobackup("test --no-progress --verbose --keep-source=0 --keep-target=0 --allow-empty".split(" ")).run())
 
         #make snapshot 2, shouldnt delete 0 since it has holds, but will delete 1 since it has no holds
-        with patch('time.strftime', return_value="20101111000002"):
-            self.assertFalse(ZfsAutobackup("test --verbose --keep-source=0 --keep-target=0 --allow-empty".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000002"):
+            self.assertFalse(ZfsAutobackup("test --no-progress --verbose --keep-source=0 --keep-target=0 --allow-empty".split(" ")).run())
 
         r = shelltest("zfs list -H -o name -r -t all " + TEST_POOLS)
         self.assertMultiLineEqual(r, """
@@ -784,8 +847,8 @@ test_target1/test_source2/fs2/sub@test-20101111000000
 """)
 
         #make another backup but with no-holds. we should naturally endup with only number 3
-        with patch('time.strftime', return_value="20101111000003"):
-            self.assertFalse(ZfsAutobackup("test test_target1 --verbose --keep-source=0 --keep-target=0 --no-holds --allow-empty".split(" ")).run())
+        with patch('time.strftime', return_value="test-20101111000003"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --keep-source=0 --keep-target=0 --no-holds --allow-empty".split(" ")).run())
 
         r = shelltest("zfs list -H -o name -r -t all " + TEST_POOLS)
         self.assertMultiLineEqual(r, """
@@ -813,9 +876,9 @@ test_target1/test_source2/fs2/sub@test-20101111000003
 """)
 
 
-        # make snapshot 4, since we used no-holds, it will delete 3 on the source, breaking the backup
-        with patch('time.strftime', return_value="20101111000004"):
-            self.assertFalse(ZfsAutobackup("test --verbose --keep-source=0 --keep-target=0 --allow-empty".split(" ")).run())
+        # run with snapshot-only for 4, since we used no-holds, it will delete 3 on the source, breaking the backup
+        with patch('time.strftime', return_value="test-20101111000004"):
+            self.assertFalse(ZfsAutobackup("test --no-progress --verbose --keep-source=0 --keep-target=0 --allow-empty".split(" ")).run())
 
         r = shelltest("zfs list -H -o name -r -t all " + TEST_POOLS)
         self.assertMultiLineEqual(r, """
@@ -842,9 +905,26 @@ test_target1/test_source2/fs2/sub
 test_target1/test_source2/fs2/sub@test-20101111000003
 """)
 
-    ###########################
-# TODO:
 
-    def  test_raw(self):
+    def test_progress(self):
 
-        self.skipTest("todo: later when travis supports zfs 0.8")
+        r=shelltest("dd if=/dev/zero of=/test_source1/data.txt bs=200000 count=1")
+        r = shelltest("zfs snapshot test_source1@test")
+
+        l=LogConsole(show_verbose=True, show_debug=False, color=False)
+        n=ZfsNode(snapshot_time_format="bla", hold_name="bla", logger=l)
+        d=ZfsDataset(n,"test_source1@test")
+
+        sp=d.send_pipe([], prev_snapshot=None, resume_token=None, show_progress=True, raw=False, send_pipes=[], send_properties=True, write_embedded=True, zfs_compressed=True)
+
+
+        with OutputIO() as buf:
+            with redirect_stderr(buf):
+                try:
+                    n.run(["sleep", "2"], inp=sp)
+                except:
+                    pass
+
+            print(buf.getvalue())
+            # correct message?
+            self.assertRegex(buf.getvalue(),".*>>> .*minutes left.*")

tests/test_zfsautobackup31.py

@@ -0,0 +1,81 @@
+from basetest import *
+import time
+
+class TestZfsAutobackup31(unittest2.TestCase):
+    """various new 3.1 features"""
+
+    def setUp(self):
+        prepare_zpools()
+        self.longMessage=True
+
+    def test_no_thinning(self):
+
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --allow-empty".split(" ")).run())
+
+        with patch('time.strftime', return_value="test-20101111000001"):
+            self.assertFalse(ZfsAutobackup("test test_target1 --no-progress --verbose --allow-empty --keep-target=0 --keep-source=0 --no-thinning".split(" ")).run())
+
+            r=shelltest("zfs list -H -o name -r -t all "+TEST_POOLS)
+            self.assertMultiLineEqual(r,"""
+test_source1
+test_source1/fs1
+test_source1/fs1@test-20101111000000
+test_source1/fs1@test-20101111000001
+test_source1/fs1/sub
+test_source1/fs1/sub@test-20101111000000
+test_source1/fs1/sub@test-20101111000001
+test_source2
+test_source2/fs2
+test_source2/fs2/sub
+test_source2/fs2/sub@test-20101111000000
+test_source2/fs2/sub@test-20101111000001
+test_source2/fs3
+test_source2/fs3/sub
+test_target1
+test_target1/test_source1
+test_target1/test_source1/fs1
+test_target1/test_source1/fs1@test-20101111000000
+test_target1/test_source1/fs1@test-20101111000001
+test_target1/test_source1/fs1/sub
+test_target1/test_source1/fs1/sub@test-20101111000000
+test_target1/test_source1/fs1/sub@test-20101111000001
+test_target1/test_source2
+test_target1/test_source2/fs2
+test_target1/test_source2/fs2/sub
+test_target1/test_source2/fs2/sub@test-20101111000000
+test_target1/test_source2/fs2/sub@test-20101111000001
+""")
+
+
+    def test_re_replication(self):
+        """test re-replication of something thats already a backup (new in v3.1-beta5)"""
+
+        shelltest("zfs create test_target1/a")
+        shelltest("zfs create test_target1/b")
+
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(ZfsAutobackup("test test_target1/a --no-progress --verbose --debug".split(" ")).run())
+
+        with patch('time.strftime', return_value="test-20101111000001"):
+            self.assertFalse(ZfsAutobackup("test test_target1/b --no-progress --verbose".split(" ")).run())
+
+            r=shelltest("zfs list -H -o name -r -t snapshot test_target1")
+            #NOTE: it wont backup test_target1/a/test_source2/fs2/sub to test_target1/b since it doesnt have the zfs_autobackup property anymore.
+            self.assertMultiLineEqual(r,"""
+test_target1/a/test_source1/fs1@test-20101111000000
+test_target1/a/test_source1/fs1/sub@test-20101111000000
+test_target1/a/test_source2/fs2/sub@test-20101111000000
+test_target1/b/test_source1/fs1@test-20101111000000
+test_target1/b/test_source1/fs1/sub@test-20101111000000
+test_target1/b/test_source2/fs2/sub@test-20101111000000
+test_target1/b/test_target1/a/test_source1/fs1@test-20101111000000
+test_target1/b/test_target1/a/test_source1/fs1/sub@test-20101111000000
+""")
+
+    def test_zfs_compressed(self):
+
+        with patch('time.strftime', return_value="test-20101111000000"):
+            self.assertFalse(
+                ZfsAutobackup("test test_target1 --no-progress --verbose --debug --zfs-compressed".split(" ")).run())
+

tests/test_zfsnode.py

@@ -1,6 +1,6 @@
 from basetest import *
 from zfs_autobackup.LogStub import LogStub
-
+from zfs_autobackup.ExecuteNode import ExecuteError
 
 
 class TestZfsNode(unittest2.TestCase):
@@ -9,95 +9,148 @@ class TestZfsNode(unittest2.TestCase):
         prepare_zpools()
         # return super().setUp()
 
-
     def test_consistent_snapshot(self):
-        logger=LogStub()
-        description="[Source]"
-        node=ZfsNode("test", logger, description=description)
+        logger = LogStub()
+        description = "[Source]"
+        node = ZfsNode(snapshot_time_format="test-%Y%m%d%H%M%S", hold_name="zfs_autobackup:test", logger=logger, description=description)
 
         with self.subTest("first snapshot"):
-            node.consistent_snapshot(node.selected_datasets, "test-1",100000)
-            r=shelltest("zfs list -H -o name -r -t all "+TEST_POOLS)
-            self.assertEqual(r,"""
+            node.consistent_snapshot(node.selected_datasets(property_name="autobackup:test",exclude_paths=[], exclude_received=False, exclude_unchanged=False, min_change=200000), "test-20101111000001", 100000)
+            r = shelltest("zfs list -H -o name -r -t all " + TEST_POOLS)
+            self.assertEqual(r, """
 test_source1
 test_source1/fs1
-test_source1/fs1@test-1
+test_source1/fs1@test-20101111000001
 test_source1/fs1/sub
-test_source1/fs1/sub@test-1
+test_source1/fs1/sub@test-20101111000001
 test_source2
 test_source2/fs2
 test_source2/fs2/sub
-test_source2/fs2/sub@test-1
+test_source2/fs2/sub@test-20101111000001
 test_source2/fs3
 test_source2/fs3/sub
 test_target1
 """)
 
-
         with self.subTest("second snapshot, no changes, no snapshot"):
-            node.consistent_snapshot(node.selected_datasets, "test-2",1)
-            r=shelltest("zfs list -H -o name -r -t all "+TEST_POOLS)
-            self.assertEqual(r,"""
+            node.consistent_snapshot(node.selected_datasets(property_name="autobackup:test",exclude_paths=[], exclude_received=False, exclude_unchanged=False, min_change=200000), "test-20101111000002", 1)
+            r = shelltest("zfs list -H -o name -r -t all " + TEST_POOLS)
+            self.assertEqual(r, """
 test_source1
 test_source1/fs1
-test_source1/fs1@test-1
+test_source1/fs1@test-20101111000001
 test_source1/fs1/sub
-test_source1/fs1/sub@test-1
+test_source1/fs1/sub@test-20101111000001
 test_source2
 test_source2/fs2
 test_source2/fs2/sub
-test_source2/fs2/sub@test-1
+test_source2/fs2/sub@test-20101111000001
 test_source2/fs3
 test_source2/fs3/sub
 test_target1
 """)
 
         with self.subTest("second snapshot, no changes, empty snapshot"):
-            node.consistent_snapshot(node.selected_datasets, "test-2",0)
-            r=shelltest("zfs list -H -o name -r -t all "+TEST_POOLS)
-            self.assertEqual(r,"""
+            node.consistent_snapshot(node.selected_datasets(property_name="autobackup:test", exclude_paths=[], exclude_received=False, exclude_unchanged=False, min_change=200000), "test-20101111000002", 0)
+            r = shelltest("zfs list -H -o name -r -t all " + TEST_POOLS)
+            self.assertEqual(r, """
 test_source1
 test_source1/fs1
-test_source1/fs1@test-1
-test_source1/fs1@test-2
+test_source1/fs1@test-20101111000001
+test_source1/fs1@test-20101111000002
 test_source1/fs1/sub
-test_source1/fs1/sub@test-1
-test_source1/fs1/sub@test-2
+test_source1/fs1/sub@test-20101111000001
+test_source1/fs1/sub@test-20101111000002
 test_source2
 test_source2/fs2
 test_source2/fs2/sub
-test_source2/fs2/sub@test-1
-test_source2/fs2/sub@test-2
+test_source2/fs2/sub@test-20101111000001
+test_source2/fs2/sub@test-20101111000002
 test_source2/fs3
 test_source2/fs3/sub
 test_target1
 """)
 
+    def test_consistent_snapshot_prepostcmds(self):
+        logger = LogStub()
+        description = "[Source]"
+        node = ZfsNode(snapshot_time_format="test", hold_name="test", logger=logger, description=description, debug_output=True)
+
+        with self.subTest("Test if all cmds are executed correctly (no failures)"):
+            with OutputIO() as buf:
+                with redirect_stdout(buf):
+                    node.consistent_snapshot(node.selected_datasets(property_name="autobackup:test", exclude_paths=[], exclude_received=False, exclude_unchanged=False, min_change=1), "test-1",
+                                             0,
+                                             pre_snapshot_cmds=["echo pre1", "echo pre2"],
+                                             post_snapshot_cmds=["echo post1 >&2", "echo post2 >&2"]
+                                             )
+
+                self.assertIn("STDOUT > pre1", buf.getvalue())
+                self.assertIn("STDOUT > pre2", buf.getvalue())
+                self.assertIn("STDOUT > post1", buf.getvalue())
+                self.assertIn("STDOUT > post2", buf.getvalue())
+
+
+        with self.subTest("Failure in the middle, only pre1 and both post1 and post2 should be executed, no snapshot should be attempted"):
+            with OutputIO() as buf:
+                with redirect_stdout(buf):
+                    with self.assertRaises(ExecuteError):
+                        node.consistent_snapshot(node.selected_datasets(property_name="autobackup:test", exclude_paths=[], exclude_received=False, exclude_unchanged=False, min_change=1), "test-1",
+                                                 0,
+                                                 pre_snapshot_cmds=["echo pre1", "false", "echo pre2"],
+                                                 post_snapshot_cmds=["echo post1", "false", "echo post2"]
+                                                 )
+
+                print(buf.getvalue())
+                self.assertIn("STDOUT > pre1", buf.getvalue())
+                self.assertNotIn("STDOUT > pre2", buf.getvalue())
+                self.assertIn("STDOUT > post1", buf.getvalue())
+                self.assertIn("STDOUT > post2", buf.getvalue())
+
+        with self.subTest("Snapshot fails"):
+            with OutputIO() as buf:
+                with redirect_stdout(buf):
+                    with self.assertRaises(ExecuteError):
+                        #same snapshot name as before so it fails
+                        node.consistent_snapshot(node.selected_datasets(property_name="autobackup:test", exclude_paths=[], exclude_received=False, exclude_unchanged=False, min_change=1), "test-1",
+                                                 0,
+                                                 pre_snapshot_cmds=["echo pre1", "echo pre2"],
+                                                 post_snapshot_cmds=["echo post1", "echo post2"]
+                                                 )
+
+                print(buf.getvalue())
+                self.assertIn("STDOUT > pre1", buf.getvalue())
+                self.assertIn("STDOUT > pre2", buf.getvalue())
+                self.assertIn("STDOUT > post1", buf.getvalue())
+                self.assertIn("STDOUT > post2", buf.getvalue())
+
 
     def test_getselected(self):
-        logger=LogStub()
-        description="[Source]"
-        node=ZfsNode("test", logger, description=description)
-        s=pformat(node.selected_datasets)
+
+        # should be excluded by property
+        shelltest("zfs create test_source1/fs1/subexcluded")
+        shelltest("zfs set autobackup:test=false test_source1/fs1/subexcluded")
+
+        # should be excluded by being unchanged
+        shelltest("zfs create test_source1/fs1/unchanged")
+        shelltest("zfs snapshot test_source1/fs1/unchanged@somesnapshot")
+
+        logger = LogStub()
+        description = "[Source]"
+        node = ZfsNode(snapshot_time_format="test-%Y%m%d%H%M%S", hold_name="zfs_autobackup:test", logger=logger, description=description)
+        s = pformat(node.selected_datasets(property_name="autobackup:test", exclude_paths=[], exclude_received=False, exclude_unchanged=True, min_change=1))
         print(s)
 
-        #basics
-        self.assertEqual (s, """[(local): test_source1/fs1,
- (local): test_source1/fs1/sub,
- (local): test_source2/fs2/sub]""")
-
-        #caching, so expect same result after changing it
-        subprocess.check_call("zfs set autobackup:test=true test_source2/fs3", shell=True)
-        self.assertEqual (s, """[(local): test_source1/fs1,
+        # basics
+        self.assertEqual(s, """[(local): test_source1/fs1,
  (local): test_source1/fs1/sub,
  (local): test_source2/fs2/sub]""")
 
 
     def test_validcommand(self):
-        logger=LogStub()
-        description="[Source]"
-        node=ZfsNode("test", logger, description=description)
-
+        logger = LogStub()
+        description = "[Source]"
+        node = ZfsNode(snapshot_time_format="test-%Y%m%d%H%M%S", hold_name="zfs_autobackup:test", logger=logger, description=description)
 
         with self.subTest("test invalid option"):
             self.assertFalse(node.valid_command(["zfs", "send", "--invalid-option", "nonexisting"]))
@@ -105,21 +158,19 @@ test_target1
             self.assertTrue(node.valid_command(["zfs", "send", "-v", "nonexisting"]))
 
     def test_supportedsendoptions(self):
-        logger=LogStub()
-        description="[Source]"
-        node=ZfsNode("test", logger, description=description)
+        logger = LogStub()
+        description = "[Source]"
+        node = ZfsNode(snapshot_time_format="test-%Y%m%d%H%M%S", hold_name="zfs_autobackup:test", logger=logger, description=description)
         # -D propably always supported
-        self.assertGreater(len(node.supported_send_options),0)
-
+        self.assertGreater(len(node.supported_send_options), 0)
 
     def test_supportedrecvoptions(self):
-        logger=LogStub()
-        description="[Source]"
-        #NOTE: this couldnt hang via ssh if we dont close filehandles properly. (which was a previous bug)
-        node=ZfsNode("test", logger, description=description, ssh_to='localhost')
+        logger = LogStub()
+        description = "[Source]"
+        # NOTE: this could hang via ssh if we dont close filehandles properly. (which was a previous bug)
+        node = ZfsNode(snapshot_time_format="test-%Y%m%d%H%M%S", hold_name="zfs_autobackup:test", logger=logger, description=description, ssh_to='localhost')
         self.assertIsInstance(node.supported_recv_options, list)
 
 
-
 if __name__ == '__main__':
     unittest.main()

zfs_autobackup/CmdPipe.py

@@ -0,0 +1,160 @@
+import subprocess
+import os
+import select
+
+try:
+    from shlex import quote as cmd_quote
+except ImportError:
+    from pipes import quote as cmd_quote
+
+
+class CmdItem:
+    """one command item, to be added to a CmdPipe"""
+
+    def __init__(self, cmd, readonly=False, stderr_handler=None, exit_handler=None, shell=False):
+        """create item. caller has to make sure cmd is properly escaped when using shell.
+        :type cmd: list of str
+        """
+
+        self.cmd = cmd
+        self.readonly = readonly
+        self.stderr_handler = stderr_handler
+        self.exit_handler = exit_handler
+        self.shell = shell
+        self.process = None
+
+    def __str__(self):
+        """return copy-pastable version of command."""
+        if self.shell:
+            # its already copy pastable for a shell:
+            return " ".join(self.cmd)
+        else:
+            # make it copy-pastable, will make a mess of quotes sometimes, but is correct
+            return " ".join(map(cmd_quote, self.cmd))
+
+    def create(self, stdin):
+        """actually create the subprocess (called by CmdPipe)"""
+
+        # make sure the command gets all the data in utf8 format:
+        # (this is necessary if LC_ALL=en_US.utf8 is not set in the environment)
+        encoded_cmd = []
+        for arg in self.cmd:
+            encoded_cmd.append(arg.encode('utf-8'))
+
+        self.process = subprocess.Popen(encoded_cmd, env=os.environ, stdout=subprocess.PIPE, stdin=stdin,
+                                        stderr=subprocess.PIPE, shell=self.shell)
+
+
+class CmdPipe:
+    """a pipe of one or more commands. also takes care of utf-8 encoding/decoding and line based parsing"""
+
+    def __init__(self, readonly=False, inp=None):
+        """
+        :param inp: input string for stdin
+        :param readonly: Only execute if entire pipe consist of readonly commands
+        """
+        # list of commands + error handlers to execute
+        self.items = []
+
+        self.inp = inp
+        self.readonly = readonly
+        self._should_execute = True
+
+    def add(self, cmd_item):
+        """adds a CmdItem to pipe.
+        :type cmd_item: CmdItem
+        """
+
+        self.items.append(cmd_item)
+
+        if not cmd_item.readonly and self.readonly:
+            self._should_execute = False
+
+    def __str__(self):
+        """transform whole pipe into oneliner for debugging and testing. this should generate a copy-pastable string for in a console """
+
+        ret = ""
+        for item in self.items:
+            if ret:
+                ret = ret + " | "
+            ret = ret + "({})".format(item)  # this will do proper escaping to make it copypastable
+
+        return ret
+
+    def should_execute(self):
+        return self._should_execute
+
+    def execute(self, stdout_handler):
+        """run the pipe. returns True all exit handlers returned true"""
+
+        if not self._should_execute:
+            return True
+
+        # first process should have actual user input as stdin:
+        selectors = []
+
+        # create processes
+        last_stdout = None
+        stdin = subprocess.PIPE
+        for item in self.items:
+
+            item.create(stdin)
+            selectors.append(item.process.stderr)
+
+            if last_stdout is None:
+                # we're the first process in the pipe, do we have some input?
+                if self.inp is not None:
+                    # TODO: make streaming to support big inputs?
+                    item.process.stdin.write(self.inp.encode('utf-8'))
+                item.process.stdin.close()
+            else:
+                # last stdout was piped to this stdin already, so close it because we dont need it anymore
+                last_stdout.close()
+
+            last_stdout = item.process.stdout
+            stdin = last_stdout
+
+        # monitor last stdout as well
+        selectors.append(last_stdout)
+
+        while True:
+            # wait for output on one of the stderrs or last_stdout
+            (read_ready, write_ready, ex_ready) = select.select(selectors, [], [])
+            eof_count = 0
+            done_count = 0
+
+            # read line and call appropriate handlers
+            if last_stdout in read_ready:
+                line = last_stdout.readline().decode('utf-8').rstrip()
+                if line != "":
+                    stdout_handler(line)
+                else:
+                    eof_count = eof_count + 1
+
+            for item in self.items:
+                if item.process.stderr in read_ready:
+                    line = item.process.stderr.readline().decode('utf-8').rstrip()
+                    if line != "":
+                        item.stderr_handler(line)
+                    else:
+                        eof_count = eof_count + 1
+
+                if item.process.poll() is not None:
+                    done_count = done_count + 1
+
+            # all filehandles are eof and all processes are done (poll() is not None)
+            if eof_count == len(selectors) and done_count == len(self.items):
+                break
+
+        # close filehandles
+        last_stdout.close()
+        for item in self.items:
+            item.process.stderr.close()
+
+        # call exit handlers
+        success = True
+        for item in self.items:
+            if item.exit_handler is not None:
+                success=item.exit_handler(item.process.returncode) and success
+
+        return success

zfs_autobackup/ExecuteNode.py

@@ -1,12 +1,24 @@
 import os
 import select
 import subprocess
+from .CmdPipe import CmdPipe, CmdItem
+from .LogStub import LogStub
+
+try:
+    from shlex import quote as cmd_quote
+except ImportError:
+    from pipes import quote as cmd_quote
+
+
+class ExecuteError(Exception):
+    pass
 
-from zfs_autobackup.LogStub import LogStub
 
 class ExecuteNode(LogStub):
     """an endpoint to execute local or remote commands via ssh"""
 
+    PIPE=1
+
     def __init__(self, ssh_config=None, ssh_to=None, readonly=False, debug_output=False):
         """ssh_config: custom ssh config
            ssh_to: server you want to ssh to. none means local
@@ -37,163 +49,118 @@ class ExecuteNode(LogStub):
         else:
             self.error("STDERR > " + line.rstrip())
 
-    def _parse_stderr_pipe(self, line, hide_errors):
-        """parse stderr from pipe input process. can be overridden in subclass"""
-        if hide_errors:
-            self.debug("STDERR|> " + line.rstrip())
+    def _quote(self, cmd):
+        """return quoted version of command. if it has value PIPE it will add an actual | """
+        if cmd==self.PIPE:
+            return('|')
         else:
-            self.error("STDERR|> " + line.rstrip())
+            return(cmd_quote(cmd))
 
-    def run(self, cmd, inp=None, tab_split=False, valid_exitcodes=None, readonly=False, hide_errors=False, pipe=False,
-            return_stderr=False):
-        """run a command on the node cmd: the actual command, should be a list, where the first item is the command
-        and the rest are parameters. input: Can be None, a string or a pipe-handle you got from another run()
-        tab_split: split tabbed files in output into a list valid_exitcodes: list of valid exit codes for this
-        command (checks exit code of both sides of a pipe) readonly: make this True if the command doesn't make any
-        changes and is safe to execute in testmode hide_errors: don't show stderr output as error, instead show it as
-        debugging output (use to hide expected errors) pipe: Instead of executing, return a pipe-handle to be used to
-        input to another run() command. (just like a | in linux) return_stderr: return both stdout and stderr as a
-        tuple. (only returns stderr from this side of the pipe)
-        """
+    def _shell_cmd(self, cmd):
+        """prefix specified ssh shell to command and escape shell characters"""
 
-        if not valid_exitcodes:
-            valid_exitcodes = [0]
+        ret=[]
 
-        encoded_cmd = []
-
-        # use ssh?
-        if self.ssh_to is not None:
-            encoded_cmd.append("ssh".encode('utf-8'))
+        #add remote shell
+        if not self.is_local():
+            ret=["ssh"]
 
             if self.ssh_config is not None:
-                encoded_cmd.extend(["-F".encode('utf-8'), self.ssh_config.encode('utf-8')])
+                ret.extend(["-F", self.ssh_config])
 
-            encoded_cmd.append(self.ssh_to.encode('utf-8'))
+            ret.append(self.ssh_to)
 
-            # make sure the command gets all the data in utf8 format:
-            # (this is necessary if LC_ALL=en_US.utf8 is not set in the environment)
-            for arg in cmd:
-                # add single quotes for remote commands to support spaces and other weird stuff (remote commands are
-                # executed in a shell) and escape existing single quotes (bash needs ' to end the quoted string,
-                # then a \' for the actual quote and then another ' to start a new quoted string) (and then python
-                # needs the double \ to get a single \)
-                encoded_cmd.append(("'" + arg.replace("'", "'\\''") + "'").encode('utf-8'))
+        ret.append(" ".join(map(self._quote, cmd)))
 
+        return ret
+
+    def is_local(self):
+        return self.ssh_to is None
+
+    def run(self, cmd, inp=None, tab_split=False, valid_exitcodes=None, readonly=False, hide_errors=False,
+            return_stderr=False, pipe=False, return_all=False):
+        """run a command on the node , checks output and parses/handle output and returns it
+
+        Either uses a local shell (sh -c) or remote shell (ssh) to execute the command.
+        Therefore the command can have stuff like actual pipes in it, if you dont want to use pipe=True to pipe stuff.
+
+        :param cmd: the actual command, should be a list, where the first item is the command
+                    and the rest are parameters. use ExecuteNode.PIPE to add an unescaped |
+                    (if you want to use system piping instead of python piping)
+        :param pipe: return CmdPipe instead of executing it.
+        :param inp: Can be None, a string or a CmdPipe that was previously returned.
+        :param tab_split: split tabbed files in output into a list
+        :param valid_exitcodes: list of valid exit codes for this command (checks exit code of both sides of a pipe)
+                                Use [] to accept all exit codes. Default [0]
+        :param readonly: make this True if the command doesn't make any changes and is safe to execute in testmode
+        :param hide_errors: don't show stderr output as error, instead show it as debugging output (use to hide expected errors)
+        :param return_stderr: return both stdout and stderr as a tuple. (normally only returns stdout)
+        :param return_all: return both stdout and stderr and exit_code as a tuple. (normally only returns stdout)
+
+        """
+
+        # create new pipe?
+        if not isinstance(inp, CmdPipe):
+            cmd_pipe = CmdPipe(self.readonly, inp)
         else:
-            for arg in cmd:
-                encoded_cmd.append(arg.encode('utf-8'))
+            # add stuff to existing pipe
+            cmd_pipe = inp
 
-        # debug and test stuff
-        debug_txt = ""
-        for c in encoded_cmd:
-            debug_txt = debug_txt + " " + c.decode()
-
-        if pipe:
-            debug_txt = debug_txt + " |"
-
-        if self.readonly and not readonly:
-            self.debug("SKIP   > " + debug_txt)
-        else:
-            if pipe:
-                self.debug("PIPE   > " + debug_txt)
-            else:
-                self.debug("RUN    > " + debug_txt)
-
-        # determine stdin
-        if inp is None:
-            # NOTE: Not None, otherwise it reads stdin from terminal!
-            stdin = subprocess.PIPE
-        elif isinstance(inp, str) or type(inp) == 'unicode':
-            self.debug("INPUT  > \n" + inp.rstrip())
-            stdin = subprocess.PIPE
-        elif isinstance(inp, subprocess.Popen):
-            self.debug("Piping input")
-            stdin = inp.stdout
-        else:
-            raise (Exception("Program error: Incompatible input"))
-
-        if self.readonly and not readonly:
-            # todo: what happens if input is piped?
-            return
-
-        # execute and parse/return results
-        p = subprocess.Popen(encoded_cmd, env=os.environ, stdout=subprocess.PIPE, stdin=stdin, stderr=subprocess.PIPE)
-
-        # Note: make streaming?
-        if isinstance(inp, str) or type(inp) == 'unicode':
-            p.stdin.write(inp.encode('utf-8'))
-
-        if p.stdin:
-            p.stdin.close()
-
-        # return pipe
-        if pipe:
-            return p
-
-        # handle all outputs
-        if isinstance(inp, subprocess.Popen):
-            selectors = [p.stdout, p.stderr, inp.stderr]
-            inp.stdout.close()  # otherwise inputprocess wont exit when ours does
-        else:
-            selectors = [p.stdout, p.stderr]
-
-        output_lines = []
+        # stderr parser
         error_lines = []
-        while True:
-            (read_ready, write_ready, ex_ready) = select.select(selectors, [], [])
-            eof_count = 0
-            if p.stdout in read_ready:
-                line = p.stdout.readline().decode('utf-8')
-                if line != "":
-                    if tab_split:
-                        output_lines.append(line.rstrip().split('\t'))
-                    else:
-                        output_lines.append(line.rstrip())
-                    self._parse_stdout(line)
-                else:
-                    eof_count = eof_count + 1
-            if p.stderr in read_ready:
-                line = p.stderr.readline().decode('utf-8')
-                if line != "":
-                    if tab_split:
-                        error_lines.append(line.rstrip().split('\t'))
-                    else:
-                        error_lines.append(line.rstrip())
-                    self._parse_stderr(line, hide_errors)
-                else:
-                    eof_count = eof_count + 1
-            if isinstance(inp, subprocess.Popen) and (inp.stderr in read_ready):
-                line = inp.stderr.readline().decode('utf-8')
-                if line != "":
-                    self._parse_stderr_pipe(line, hide_errors)
-                else:
-                    eof_count = eof_count + 1
+        returned_exit_code=None
 
-            # stop if both processes are done and all filehandles are EOF:
-            if (p.poll() is not None) and (
-                    (not isinstance(inp, subprocess.Popen)) or inp.poll() is not None) and eof_count == len(selectors):
-                break
+        def stderr_handler(line):
+            if tab_split:
+                error_lines.append(line.rstrip().split('\t'))
+            else:
+                error_lines.append(line.rstrip())
+            self._parse_stderr(line, hide_errors)
 
-        p.stderr.close()
-        p.stdout.close()
-
-        if self.debug_output:
-            self.debug("EXIT   > {}".format(p.returncode))
-
-        # handle piped process error output and exit codes
-        if isinstance(inp, subprocess.Popen):
-            inp.stderr.close()
-            inp.stdout.close()
+        # exit code hanlder
+        if valid_exitcodes is None:
+            valid_exitcodes = [0]
 
+        def exit_handler(exit_code):
             if self.debug_output:
-                self.debug("EXIT  |> {}".format(inp.returncode))
-            if valid_exitcodes and inp.returncode not in valid_exitcodes:
-                raise (subprocess.CalledProcessError(inp.returncode, "(pipe)"))
+                self.debug("EXIT   > {}".format(exit_code))
 
-        if valid_exitcodes and p.returncode not in valid_exitcodes:
-            raise (subprocess.CalledProcessError(p.returncode, encoded_cmd))
+            if (valid_exitcodes != []) and (exit_code not in valid_exitcodes):
+                self.error("Command \"{}\" returned exit code {} (valid codes: {})".format(cmd_item, exit_code, valid_exitcodes))
+                return False
 
-        if return_stderr:
+            return True
+
+        # add shell command and handlers to pipe
+        cmd_item=CmdItem(cmd=self._shell_cmd(cmd), readonly=readonly, stderr_handler=stderr_handler, exit_handler=exit_handler, shell=self.is_local())
+        cmd_pipe.add(cmd_item)
+
+        # return pipe instead of executing?
+        if pipe:
+            return cmd_pipe
+
+        # stdout parser
+        output_lines = []
+
+        def stdout_handler(line):
+            if tab_split:
+                output_lines.append(line.rstrip().split('\t'))
+            else:
+                output_lines.append(line.rstrip())
+            self._parse_stdout(line)
+
+        if cmd_pipe.should_execute():
+            self.debug("CMD    > {}".format(cmd_pipe))
+        else:
+            self.debug("CMDSKIP> {}".format(cmd_pipe))
+
+        # execute and calls handlers in CmdPipe
+        if not cmd_pipe.execute(stdout_handler=stdout_handler):
+            raise(ExecuteError("Last command returned error"))
+
+        if return_all:
+            return output_lines, error_lines, cmd_item.process and cmd_item.process.returncode
+        elif return_stderr:
             return output_lines, error_lines
         else:
             return output_lines

zfs_autobackup/LogConsole.py

@@ -1,33 +1,46 @@
+# python 2 compatibility
+from __future__ import print_function
+
 import sys
 
-colorama = False
-if sys.stdout.isatty():
-    try:
-        import colorama
-    except ImportError:
-        colorama = False
-        pass
-
-
 class LogConsole:
     """Log-class that outputs to console, adding colors if needed"""
 
-    def __init__(self, show_debug=False, show_verbose=False):
+    def __init__(self, show_debug, show_verbose, color):
         self.last_log = ""
         self.show_debug = show_debug
         self.show_verbose = show_verbose
 
-    @staticmethod
-    def error(txt):
-        if colorama:
+        if color:
+            # try to use color, failback if colorama not available
+            self.colorama=False
+            try:
+                import colorama
+                global colorama
+                self.colorama = True
+            except ImportError:
+                pass
+
+        else:
+            self.colorama=False
+
+    def error(self, txt):
+        if self.colorama:
             print(colorama.Fore.RED + colorama.Style.BRIGHT + "! " + txt + colorama.Style.RESET_ALL, file=sys.stderr)
         else:
             print("! " + txt, file=sys.stderr)
         sys.stderr.flush()
 
+    def warning(self, txt):
+        if self.colorama:
+            print(colorama.Fore.YELLOW + colorama.Style.BRIGHT + "  NOTE: " + txt + colorama.Style.RESET_ALL)
+        else:
+            print("  NOTE: " + txt)
+        sys.stdout.flush()
+
     def verbose(self, txt):
         if self.show_verbose:
-            if colorama:
+            if self.colorama:
                 print(colorama.Style.NORMAL + "  " + txt + colorama.Style.RESET_ALL)
             else:
                 print("  " + txt)
@@ -35,8 +48,19 @@ class LogConsole:
 
     def debug(self, txt):
         if self.show_debug:
-            if colorama:
+            if self.colorama:
                 print(colorama.Fore.GREEN + "# " + txt + colorama.Style.RESET_ALL)
             else:
                 print("# " + txt)
             sys.stdout.flush()
+
+    def progress(self, txt):
+        """print progress output to stderr (stays on same line)"""
+        self.clear_progress()
+        print(">>> {}\r".format(txt), end='', file=sys.stderr)
+        sys.stderr.flush()
+
+    def clear_progress(self):
+        import colorama
+        print(colorama.ansi.clear_line(), end='', file=sys.stderr)
+        sys.stderr.flush()

zfs_autobackup/LogStub.py

@@ -11,5 +11,8 @@ class LogStub:
     def verbose(self, txt):
         print("VERBOSE: " + txt)
 
+    def warning(self, txt):
+        print("WARNING: " + txt)
+
     def error(self, txt):
         print("ERROR  : " + txt)

zfs_autobackup/Thinner.py

@@ -1,14 +1,15 @@
 import time
 
-from zfs_autobackup.ThinnerRule import ThinnerRule
+from .ThinnerRule import ThinnerRule
 
 
 class Thinner:
     """progressive thinner (universal, used for cleaning up snapshots)"""
 
     def __init__(self, schedule_str=""):
-        """schedule_str: comma seperated list of ThinnerRules. A plain number specifies how many snapshots to always
-        keep.
+        """
+        Args:
+            schedule_str: comma seperated list of ThinnerRules. A plain number specifies how many snapshots to always keep.
         """
 
         self.rules = []
@@ -19,7 +20,7 @@ class Thinner:
 
         rule_strs = schedule_str.split(",")
         for rule_str in rule_strs:
-            if rule_str.isdigit():
+            if rule_str.lstrip('-').isdigit():
                 self.always_keep = int(rule_str)
                 if self.always_keep < 0:
                     raise (Exception("Number of snapshots to keep cant be negative: {}".format(self.always_keep)))
@@ -37,11 +38,15 @@ class Thinner:
         return ret
 
     def thin(self, objects, keep_objects=None, now=None):
-        """thin list of objects with current schedule rules. objects: list of objects to thin. every object should
-        have timestamp attribute. keep_objects: objects to always keep (these should also be in normal objects list,
-        so we can use them to perhaps delete other obsolete objects)
+        """thin list of objects with current schedule rules. objects: list of
+        objects to thin. every object should have timestamp attribute.
 
             return( keeps, removes )
+
+        Args:
+            objects: list of objects to check (should have a timestamp attribute)
+            keep_objects: objects to always keep (if they also are in the in the normal objects list)
+            now: if specified, use this time as current time
         """
 
         if not keep_objects:

zfs_autobackup/ThinnerRule.py

@@ -39,6 +39,9 @@ class ThinnerRule:
         rule_str = rule_str.lower()
         matches = re.findall("([0-9]*)([a-z]*)([0-9]*)([a-z]*)", rule_str)[0]
 
+        if '' in matches:
+            raise (Exception("Invalid schedule string: '{}'".format(rule_str)))
+
         period_amount = int(matches[0])
         period_unit = matches[1]
         ttl_amount = int(matches[2])

zfs_autobackup/ZfsAuto.py

@@ -0,0 +1,191 @@
+import argparse
+import os.path
+import sys
+
+from .LogConsole import LogConsole
+
+
+class ZfsAuto(object):
+    """Common Base class, this class is always used subclassed. Look at ZfsAutobackup and ZfsAutoverify ."""
+
+    # also used by setup.py
+    VERSION = "3.2-alpha1"
+    HEADER = "{} v{} - (c)2021 E.H.Eefting (edwin@datux.nl)".format(os.path.basename(sys.argv[0]), VERSION)
+
+    def __init__(self, argv, print_arguments=True):
+
+        self.hold_name = None
+        self.snapshot_time_format = None
+        self.property_name = None
+        self.exclude_paths = None
+
+        # helps with investigating failed regression tests:
+        if print_arguments:
+            print("ARGUMENTS: " + " ".join(argv))
+
+        self.args = self.parse_args(argv)
+
+    def parse_args(self, argv):
+        """parse common arguments, setup logging, check and adjust parameters"""
+
+        parser=self.get_parser()
+        args = parser.parse_args(argv)
+
+        if args.help:
+            parser.print_help()
+            sys.exit(255)
+
+        if args.version:
+            print(self.HEADER)
+            sys.exit(255)
+
+        # auto enable progress?
+        if sys.stderr.isatty() and not args.no_progress:
+            args.progress = True
+
+        if args.debug_output:
+            args.debug = True
+
+        if args.test:
+            args.verbose = True
+
+        if args.debug:
+            args.verbose = True
+
+        self.log = LogConsole(show_debug=args.debug, show_verbose=args.verbose, color=sys.stdout.isatty())
+
+        self.verbose(self.HEADER)
+        self.verbose("")
+
+        if args.backup_name == None:
+            parser.print_usage()
+            self.log.error("Please specify BACKUP-NAME")
+            sys.exit(255)
+
+        if args.target_path is not None and args.target_path[0] == "/":
+            self.log.error("Target should not start with a /")
+            sys.exit(255)
+
+        if args.ignore_replicated:
+            self.warning("--ignore-replicated has been renamed, using --exclude-unchanged")
+            args.exclude_unchanged = True
+
+        # Note: Before version v3.1-beta5, we always used exclude_received. This was a problem if you wanted to
+        # replicate an existing backup to another host and use the same backupname/snapshots. However, exclude_received
+        # may still need to be used to explicitly exclude a backup with the 'received' source property to avoid accidental
+        # recursive replication of a zvol that is currently being received in another session (as it will have changes).
+
+        self.exclude_paths = []
+        if args.ssh_source == args.ssh_target:
+            if args.target_path:
+                # target and source are the same, make sure to exclude target_path
+                self.verbose("NOTE: Source and target are on the same host, excluding target-path from selection.")
+                self.exclude_paths.append(args.target_path)
+            else:
+                self.verbose("NOTE: Source and target are on the same host, excluding received datasets from selection.")
+                args.exclude_received = True
+
+        if args.test:
+            self.warning("TEST MODE - SIMULATING WITHOUT MAKING ANY CHANGES")
+
+        #format all the names
+        self.property_name = args.property_format.format(args.backup_name)
+        self.snapshot_time_format = args.snapshot_format.format(args.backup_name)
+        self.hold_name = args.hold_format.format(args.backup_name)
+
+        self.verbose("")
+        self.verbose("Selecting dataset property : {}".format(self.property_name))
+        self.verbose("Snapshot format            : {}".format(self.snapshot_time_format))
+
+        return args
+
+    def get_parser(self):
+
+        parser = argparse.ArgumentParser(description=self.HEADER, add_help=False,
+                                         epilog='Full manual at: https://github.com/psy0rz/zfs_autobackup')
+
+        #positional arguments
+        parser.add_argument('backup_name', metavar='BACKUP-NAME', default=None, nargs='?',
+                            help='Name of the backup to select')
+
+        parser.add_argument('target_path', metavar='TARGET-PATH', default=None, nargs='?',
+                            help='Target ZFS filesystem (optional)')
+
+        # Basic options
+        group=parser.add_argument_group("Basic options")
+        group.add_argument('--help', '-h', action='store_true', help='show help')
+        group.add_argument('--test', '--dry-run', '-n', action='store_true',
+                            help='Dry run, dont change anything, just show what would be done (still does all read-only '
+                                 'operations)')
+        group.add_argument('--verbose', '-v', action='store_true', help='verbose output')
+        group.add_argument('--debug', '-d', action='store_true',
+                            help='Show zfs commands that are executed, stops after an exception.')
+        group.add_argument('--debug-output', action='store_true',
+                            help='Show zfs commands and their output/exit codes. (noisy)')
+        group.add_argument('--progress', action='store_true',
+                            help='show zfs progress output. Enabled automaticly on ttys. (use --no-progress to disable)')
+        group.add_argument('--no-progress', action='store_true',
+                            help=argparse.SUPPRESS)  # needed to workaround a zfs recv -v bug
+        group.add_argument('--version', action='store_true',
+                            help='Show version.')
+        group.add_argument('--strip-path', metavar='N', default=0, type=int,
+                           help='Number of directories to strip from target path (use 1 when cloning zones between 2 '
+                                'SmartOS machines)')
+
+        # SSH options
+        group=parser.add_argument_group("SSH options")
+        group.add_argument('--ssh-config', metavar='CONFIG-FILE', default=None, help='Custom ssh client config')
+        group.add_argument('--ssh-source', metavar='USER@HOST', default=None,
+                            help='Source host to get backup from.')
+        group.add_argument('--ssh-target', metavar='USER@HOST', default=None,
+                            help='Target host to push backup to.')
+
+        group=parser.add_argument_group("String formatting options")
+        group.add_argument('--property-format', metavar='FORMAT', default="autobackup:{}",
+                            help='Dataset selection string format. Default: %(default)s')
+        group.add_argument('--snapshot-format', metavar='FORMAT', default="{}-%Y%m%d%H%M%S",
+                            help='ZFS Snapshot string format. Default: %(default)s')
+        group.add_argument('--hold-format', metavar='FORMAT', default="zfs_autobackup:{}",
+                            help='ZFS hold string format. Default: %(default)s')
+
+        group=parser.add_argument_group("Selection options")
+        group.add_argument('--ignore-replicated', action='store_true', help=argparse.SUPPRESS)
+        group.add_argument('--exclude-unchanged', action='store_true',
+                            help='Exclude datasets that have no changes since any last snapshot. (Useful in combination with proxmox HA replication)')
+        group.add_argument('--exclude-received', action='store_true',
+                            help='Exclude datasets that have the origin of their autobackup: property as "received". '
+                                 'This can avoid recursive replication between two backup partners.')
+
+        return parser
+
+    def verbose(self, txt):
+        self.log.verbose(txt)
+
+    def warning(self, txt):
+        self.log.warning(txt)
+
+    def error(self, txt):
+        self.log.error(txt)
+
+    def debug(self, txt):
+        self.log.debug(txt)
+
+    def progress(self, txt):
+        self.log.progress(txt)
+
+    def clear_progress(self):
+        self.log.clear_progress()
+
+    def set_title(self, title):
+        self.log.verbose("")
+        self.log.verbose("#### " + title)
+
+    def print_error_sources(self):
+        self.error(
+            "No source filesystems selected, please do a 'zfs set autobackup:{0}=true' on the source datasets "
+            "you want to select.".format(
+                self.args.backup_name))
+
+    def make_target_name(self, source_dataset):
+        """make target_name from a source_dataset"""
+        return self.args.target_path + "/" + source_dataset.lstrip_path(self.args.strip_path)

zfs_autobackup/ZfsAutobackup.py

@@ -1,124 +1,31 @@
-import argparse
-import sys
 import time
 
-from zfs_autobackup.Thinner import Thinner
-from zfs_autobackup.ZfsDataset import ZfsDataset
-from zfs_autobackup.LogConsole import LogConsole
-from zfs_autobackup.ZfsNode import ZfsNode
-from zfs_autobackup.ThinnerRule import ThinnerRule
+import argparse
+from .ZfsAuto import ZfsAuto
+
+from . import compressors
+from .ExecuteNode import ExecuteNode
+from .Thinner import Thinner
+from .ZfsDataset import ZfsDataset
+from .ZfsNode import ZfsNode
+from .ThinnerRule import ThinnerRule
 
 
-class ZfsAutobackup:
-    """main class"""
-
-    VERSION = "3.0.1-beta4"
-    HEADER = "zfs-autobackup v{} - Copyright 2020 E.H.Eefting (edwin@datux.nl)".format(VERSION)
+class ZfsAutobackup(ZfsAuto):
+    """The main zfs-autobackup class. Start here, at run() :)"""
 
     def __init__(self, argv, print_arguments=True):
 
-        # helps with investigating failed regression tests:
-        if print_arguments:
-            print("ARGUMENTS: " + " ".join(argv))
+        # NOTE: common options and parameters are in ZfsAuto
+        super(ZfsAutobackup, self).__init__(argv, print_arguments)
 
-        parser = argparse.ArgumentParser(
-            description=self.HEADER,
-            epilog='When a filesystem fails, zfs_backup will continue and report the number of failures at that end. '
-                   'Also the exit code will indicate the number of failures. Full manual at: https://github.com/psy0rz/zfs_autobackup')
-        parser.add_argument('--ssh-config', default=None, help='Custom ssh client config')
-        parser.add_argument('--ssh-source', default=None,
-                            help='Source host to get backup from. (user@hostname) Default %(default)s.')
-        parser.add_argument('--ssh-target', default=None,
-                            help='Target host to push backup to. (user@hostname) Default  %(default)s.')
-        parser.add_argument('--keep-source', type=str, default="10,1d1w,1w1m,1m1y",
-                            help='Thinning schedule for old source snapshots. Default: %(default)s')
-        parser.add_argument('--keep-target', type=str, default="10,1d1w,1w1m,1m1y",
-                            help='Thinning schedule for old target snapshots. Default: %(default)s')
+    def parse_args(self, argv):
+        """do extra checks on common args"""
 
-        parser.add_argument('backup_name', metavar='backup-name',
-                            help='Name of the backup (you should set the zfs property "autobackup:backup-name" to '
-                                 'true on filesystems you want to backup')
-        parser.add_argument('target_path', metavar='target-path', default=None, nargs='?',
-                            help='Target ZFS filesystem (optional: if not specified, zfs-autobackup will only operate '
-                                 'as snapshot-tool on source)')
+        args = super(ZfsAutobackup, self).parse_args(argv)
 
-        parser.add_argument('--other-snapshots', action='store_true',
-                            help='Send over other snapshots as well, not just the ones created by this tool.')
-        parser.add_argument('--no-snapshot', action='store_true',
-                            help='Don\'t create new snapshots (useful for finishing uncompleted backups, or cleanups)')
-        parser.add_argument('--no-send', action='store_true',
-                            help='Don\'t send snapshots (useful for cleanups, or if you want a serperate send-cronjob)')
-        #        parser.add_argument('--no-thinning', action='store_true', help='Don\'t run the thinner.')
-        parser.add_argument('--min-change', type=int, default=1,
-                            help='Number of bytes written after which we consider a dataset changed (default %('
-                                 'default)s)')
-        parser.add_argument('--allow-empty', action='store_true',
-                            help='If nothing has changed, still create empty snapshots. (same as --min-change=0)')
-        parser.add_argument('--ignore-replicated', action='store_true',
-                            help='Ignore datasets that seem to be replicated some other way. (No changes since '
-                                 'lastest snapshot. Useful for proxmox HA replication)')
-        parser.add_argument('--no-holds', action='store_true',
-                            help='Don\'t hold snapshots. (Faster)')
-
-        parser.add_argument('--resume', action='store_true', help=argparse.SUPPRESS)
-        parser.add_argument('--strip-path', default=0, type=int,
-                            help='Number of directories to strip from target path (use 1 when cloning zones between 2 '
-                                 'SmartOS machines)')
-        # parser.add_argument('--buffer', default="",  help='Use mbuffer with specified size to speedup zfs transfer.
-        # (e.g. --buffer 1G) Will also show nice progress output.')
-
-        parser.add_argument('--clear-refreservation', action='store_true',
-                            help='Filter "refreservation" property. (recommended, safes space. same as '
-                                 '--filter-properties refreservation)')
-        parser.add_argument('--clear-mountpoint', action='store_true',
-                            help='Set property canmount=noauto for new datasets. (recommended, prevents mount '
-                                 'conflicts. same as --set-properties canmount=noauto)')
-        parser.add_argument('--filter-properties', type=str,
-                            help='List of properties to "filter" when receiving filesystems. (you can still restore '
-                                 'them with zfs inherit -S)')
-        parser.add_argument('--set-properties', type=str,
-                            help='List of propererties to override when receiving filesystems. (you can still restore '
-                                 'them with zfs inherit -S)')
-        parser.add_argument('--rollback', action='store_true',
-                            help='Rollback changes to the latest target snapshot before starting. (normally you can '
-                                 'prevent changes by setting the readonly property on the target_path to on)')
-        parser.add_argument('--destroy-incompatible', action='store_true',
-                            help='Destroy incompatible snapshots on target. Use with care! (implies --rollback)')
-        parser.add_argument('--destroy-missing', type=str, default=None,
-                            help='Destroy datasets on target that are missing on the source. Specify the time since '
-                                 'the last snapshot, e.g: --destroy-missing 30d')
-        parser.add_argument('--ignore-transfer-errors', action='store_true',
-                            help='Ignore transfer errors (still checks if received filesystem exists. useful for '
-                                 'acltype errors)')
-        parser.add_argument('--raw', action='store_true',
-                            help='For encrypted datasets, send data exactly as it exists on disk.')
-
-        parser.add_argument('--test', action='store_true',
-                            help='dont change anything, just show what would be done (still does all read-only '
-                                 'operations)')
-        parser.add_argument('--verbose', action='store_true', help='verbose output')
-        parser.add_argument('--debug', action='store_true',
-                            help='Show zfs commands that are executed, stops after an exception.')
-        parser.add_argument('--debug-output', action='store_true',
-                            help='Show zfs commands and their output/exit codes. (noisy)')
-        parser.add_argument('--progress', action='store_true',
-                            help='show zfs progress output. Enabled automaticly on ttys. (use --no-progress to disable)')
-        parser.add_argument('--no-progress', action='store_true', help=argparse.SUPPRESS) #needed to workaround a zfs recv -v bug
-
-        # note args is the only global variable we use, since its a global readonly setting anyway
-        args = parser.parse_args(argv)
-
-        self.args = args
-
-        #auto enable progress?
-        if sys.stderr.isatty() and not args.no_progress:
-            args.progress = True
-
-        if args.debug_output:
-            args.debug = True
-
-        if self.args.test:
-            self.args.verbose = True
+        if not args.no_holds:
+            self.verbose("Hold name                  : {}".format(self.hold_name))
 
         if args.allow_empty:
             args.min_change = 0
@@ -126,78 +33,276 @@ class ZfsAutobackup:
         if args.destroy_incompatible:
             args.rollback = True
 
-        self.log = LogConsole(show_debug=self.args.debug, show_verbose=self.args.verbose)
-
         if args.resume:
-            self.verbose("NOTE: The --resume option isn't needed anymore (its autodetected now)")
+            self.warning("The --resume option isn't needed anymore (its autodetected now)")
 
-        if args.target_path is not None and args.target_path[0] == "/":
-            self.log.error("Target should not start with a /")
-            sys.exit(255)
+        if args.raw:
+            self.warning(
+                "The --raw option isn't needed anymore (its autodetected now). Also see --encrypt and --decrypt.")
 
-    def verbose(self, txt):
-        self.log.verbose(txt)
+        if args.compress and args.ssh_source is None and args.ssh_target is None:
+            self.warning("Using compression, but transfer is local.")
 
-    def error(self, txt):
-        self.log.error(txt)
+        if args.compress and args.zfs_compressed:
+            self.warning("Using --compress with --zfs-compressed, might be inefficient.")
 
-    def debug(self, txt):
-        self.log.debug(txt)
+        return args
 
-    def set_title(self, title):
-        self.log.verbose("")
-        self.log.verbose("#### " + title)
+    def get_parser(self):
+        """extend common parser with  extra stuff needed for zfs-autobackup"""
 
-    # sync datasets, or thin-only on both sides
-    # target is needed for this.
-    def sync_datasets(self, source_node, source_datasets):
+        parser = super(ZfsAutobackup, self).get_parser()
 
-        description = "[Target]"
+        group = parser.add_argument_group("Snapshot options")
+        group.add_argument('--no-snapshot', action='store_true',
+                           help='Don\'t create new snapshots (useful for finishing uncompleted backups, or cleanups)')
+        group.add_argument('--pre-snapshot-cmd', metavar="COMMAND", default=[], action='append',
+                           help='Run COMMAND before snapshotting (can be used multiple times.')
+        group.add_argument('--post-snapshot-cmd', metavar="COMMAND", default=[], action='append',
+                           help='Run COMMAND after snapshotting (can be used multiple times.')
+        group.add_argument('--min-change', metavar='BYTES', type=int, default=1,
+                           help='Only create snapshot if enough bytes are changed. (default %('
+                                'default)s)')
+        group.add_argument('--allow-empty', action='store_true',
+                           help='If nothing has changed, still create empty snapshots. (Faster. Same as --min-change=0)')
+        group.add_argument('--other-snapshots', action='store_true',
+                           help='Send over other snapshots as well, not just the ones created by this tool.')
 
-        self.set_title("Target settings")
+        group = parser.add_argument_group("Transfer options")
+        group.add_argument('--no-send', action='store_true',
+                           help='Don\'t transfer snapshots (useful for cleanups, or if you want a serperate send-cronjob)')
+        group.add_argument('--no-holds', action='store_true',
+                           help='Don\'t hold snapshots. (Faster. Allows you to destroy common snapshot.)')
+        group.add_argument('--clear-refreservation', action='store_true',
+                           help='Filter "refreservation" property. (recommended, safes space. same as '
+                                '--filter-properties refreservation)')
+        group.add_argument('--clear-mountpoint', action='store_true',
+                           help='Set property canmount=noauto for new datasets. (recommended, prevents mount '
+                                'conflicts. same as --set-properties canmount=noauto)')
+        group.add_argument('--filter-properties', metavar='PROPERTY,...', type=str,
+                           help='List of properties to "filter" when receiving filesystems. (you can still restore '
+                                'them with zfs inherit -S)')
+        group.add_argument('--set-properties', metavar='PROPERTY=VALUE,...', type=str,
+                           help='List of propererties to override when receiving filesystems. (you can still restore '
+                                'them with zfs inherit -S)')
+        group.add_argument('--rollback', action='store_true',
+                           help='Rollback changes to the latest target snapshot before starting. (normally you can '
+                                'prevent changes by setting the readonly property on the target_path to on)')
+        group.add_argument('--destroy-incompatible', action='store_true',
+                           help='Destroy incompatible snapshots on target. Use with care! (implies --rollback)')
+        group.add_argument('--ignore-transfer-errors', action='store_true',
+                           help='Ignore transfer errors (still checks if received filesystem exists. useful for '
+                                'acltype errors)')
 
-        target_thinner = Thinner(self.args.keep_target)
-        target_node = ZfsNode(self.args.backup_name, self, ssh_config=self.args.ssh_config, ssh_to=self.args.ssh_target,
-                              readonly=self.args.test, debug_output=self.args.debug_output, description=description,
-                              thinner=target_thinner)
-        target_node.verbose("Receive datasets under: {}".format(self.args.target_path))
+        group.add_argument('--decrypt', action='store_true',
+                           help='Decrypt data before sending it over.')
+        group.add_argument('--encrypt', action='store_true',
+                           help='Encrypt data after receiving it.')
 
-        if self.args.no_send:
-            self.set_title("Thinning source and target")
-        else:
-            self.set_title("Sending and thinning")
+        group.add_argument('--zfs-compressed', action='store_true',
+                           help='Transfer blocks that already have zfs-compression as-is.')
 
-        # check if exists, to prevent vague errors
-        target_dataset = ZfsDataset(target_node, self.args.target_path)
-        if not target_dataset.exists:
-            self.error("Target path '{}' does not exist. Please create this dataset first.".format(target_dataset))
-            return 255
+        group = parser.add_argument_group("ZFS send/recv pipes")
+        group.add_argument('--compress', metavar='TYPE', default=None, nargs='?', const='zstd-fast',
+                           choices=compressors.choices(),
+                           help='Use compression during transfer, defaults to zstd-fast if TYPE is not specified. ({})'.format(
+                               ", ".join(compressors.choices())))
+        group.add_argument('--rate', metavar='DATARATE', default=None,
+                           help='Limit data transfer rate (e.g. 128K. requires mbuffer.)')
+        group.add_argument('--buffer', metavar='SIZE', default=None,
+                           help='Add zfs send and recv buffers to smooth out IO bursts. (e.g. 128M. requires mbuffer)')
+        group.add_argument('--send-pipe', metavar="COMMAND", default=[], action='append',
+                           help='pipe zfs send output through COMMAND (can be used multiple times)')
+        group.add_argument('--recv-pipe', metavar="COMMAND", default=[], action='append',
+                           help='pipe zfs recv input through COMMAND (can be used multiple times)')
 
-        if self.args.filter_properties:
-            filter_properties = self.args.filter_properties.split(",")
-        else:
-            filter_properties = []
+        group = parser.add_argument_group("Thinner options")
+        group.add_argument('--no-thinning', action='store_true', help="Do not destroy any snapshots.")
+        group.add_argument('--keep-source', metavar='SCHEDULE', type=str, default="10,1d1w,1w1m,1m1y",
+                           help='Thinning schedule for old source snapshots. Default: %(default)s')
+        group.add_argument('--keep-target', metavar='SCHEDULE', type=str, default="10,1d1w,1w1m,1m1y",
+                           help='Thinning schedule for old target snapshots. Default: %(default)s')
+        group.add_argument('--destroy-missing', metavar="SCHEDULE", type=str, default=None,
+                           help='Destroy datasets on target that are missing on the source. Specify the time since '
+                                'the last snapshot, e.g: --destroy-missing 30d')
 
-        if self.args.set_properties:
-            set_properties = self.args.set_properties.split(",")
-        else:
-            set_properties = []
+        # obsolete
+        parser.add_argument('--resume', action='store_true', help=argparse.SUPPRESS)
+        parser.add_argument('--raw', action='store_true', help=argparse.SUPPRESS)
 
-        if self.args.clear_refreservation:
-            filter_properties.append("refreservation")
+        return parser
 
-        if self.args.clear_mountpoint:
-            set_properties.append("canmount=noauto")
+    # NOTE: this method also uses self.args. args that need extra processing are passed as function parameters:
+    def thin_missing_targets(self, target_dataset, used_target_datasets):
+        """thin target datasets that are missing on the source."""
+
+        self.debug("Thinning obsolete datasets")
+        missing_datasets = [dataset for dataset in target_dataset.recursive_datasets if
+                            dataset not in used_target_datasets]
+
+        count = 0
+        for dataset in missing_datasets:
+
+            count = count + 1
+            if self.args.progress:
+                self.progress("Analysing missing {}/{}".format(count, len(missing_datasets)))
+
+            try:
+                dataset.debug("Missing on source, thinning")
+                dataset.thin()
+
+            except Exception as e:
+                dataset.error("Error during thinning of missing datasets ({})".format(str(e)))
+
+        if self.args.progress:
+            self.clear_progress()
+
+    # NOTE: this method also uses self.args. args that need extra processing are passed as function parameters:
+    def destroy_missing_targets(self, target_dataset, used_target_datasets):
+        """destroy target datasets that are missing on the source and that meet the requirements"""
+
+        self.debug("Destroying obsolete datasets")
+
+        missing_datasets = [dataset for dataset in target_dataset.recursive_datasets if
+                            dataset not in used_target_datasets]
+
+        count = 0
+        for dataset in missing_datasets:
+
+            count = count + 1
+            if self.args.progress:
+                self.progress("Analysing destroy missing {}/{}".format(count, len(missing_datasets)))
+
+            try:
+                # cant do anything without our own snapshots
+                if not dataset.our_snapshots:
+                    if dataset.datasets:
+                        # its not a leaf, just ignore
+                        dataset.debug("Destroy missing: ignoring")
+                    else:
+                        dataset.verbose(
+                            "Destroy missing: has no snapshots made by us. (please destroy manually)")
+                else:
+                    # past the deadline?
+                    deadline_ttl = ThinnerRule("0s" + self.args.destroy_missing).ttl
+                    now = int(time.time())
+                    if dataset.our_snapshots[-1].timestamp + deadline_ttl > now:
+                        dataset.verbose("Destroy missing: Waiting for deadline.")
+                    else:
+
+                        dataset.debug("Destroy missing: Removing our snapshots.")
+
+                        # remove all our snaphots, except last, to safe space in case we fail later on
+                        for snapshot in dataset.our_snapshots[:-1]:
+                            snapshot.destroy(fail_exception=True)
+
+                        # does it have other snapshots?
+                        has_others = False
+                        for snapshot in dataset.snapshots:
+                            if not snapshot.is_ours():
+                                has_others = True
+                                break
+
+                        if has_others:
+                            dataset.verbose("Destroy missing: Still in use by other snapshots")
+                        else:
+                            if dataset.datasets:
+                                dataset.verbose("Destroy missing: Still has children here.")
+                            else:
+                                dataset.verbose("Destroy missing.")
+                                dataset.our_snapshots[-1].destroy(fail_exception=True)
+                                dataset.destroy(fail_exception=True)
+
+            except Exception as e:
+                if self.args.progress:
+                    self.clear_progress()
+
+                dataset.error("Error during --destroy-missing: {}".format(str(e)))
+
+        if self.args.progress:
+            self.clear_progress()
+
+    def get_send_pipes(self, logger):
+        """determine the zfs send pipe"""
+
+        ret = []
+
+        # IO buffer
+        if self.args.buffer:
+            logger("zfs send buffer        : {}".format(self.args.buffer))
+            ret.extend([ExecuteNode.PIPE, "mbuffer", "-q", "-s128k", "-m" + self.args.buffer])
+
+        # custom pipes
+        for send_pipe in self.args.send_pipe:
+            ret.append(ExecuteNode.PIPE)
+            ret.extend(send_pipe.split(" "))
+            logger("zfs send custom pipe   : {}".format(send_pipe))
+
+        # compression
+        if self.args.compress != None:
+            ret.append(ExecuteNode.PIPE)
+            cmd = compressors.compress_cmd(self.args.compress)
+            ret.extend(cmd)
+            logger("zfs send compression   : {}".format(" ".join(cmd)))
+
+        # transfer rate
+        if self.args.rate:
+            logger("zfs send transfer rate : {}".format(self.args.rate))
+            ret.extend([ExecuteNode.PIPE, "mbuffer", "-q", "-s128k", "-m16M", "-R" + self.args.rate])
+
+        return ret
+
+    def get_recv_pipes(self, logger):
+
+        ret = []
+
+        # decompression
+        if self.args.compress != None:
+            cmd = compressors.decompress_cmd(self.args.compress)
+            ret.extend(cmd)
+            ret.append(ExecuteNode.PIPE)
+            logger("zfs recv decompression : {}".format(" ".join(cmd)))
+
+        # custom pipes
+        for recv_pipe in self.args.recv_pipe:
+            ret.extend(recv_pipe.split(" "))
+            ret.append(ExecuteNode.PIPE)
+            logger("zfs recv custom pipe   : {}".format(recv_pipe))
+
+        # IO buffer
+        if self.args.buffer:
+            # only add second buffer if its usefull. (e.g. non local transfer or other pipes active)
+            if self.args.ssh_source != None or self.args.ssh_target != None or self.args.recv_pipe or self.args.send_pipe or self.args.compress != None:
+                logger("zfs recv buffer        : {}".format(self.args.buffer))
+                ret.extend(["mbuffer", "-q", "-s128k", "-m" + self.args.buffer, ExecuteNode.PIPE])
+
+        return ret
+
+    # NOTE: this method also uses self.args. args that need extra processing are passed as function parameters:
+    def sync_datasets(self, source_node, source_datasets, target_node):
+        """Sync datasets, or thin-only on both sides
+        :type target_node: ZfsNode
+        :type source_datasets: list of ZfsDataset
+        :type source_node: ZfsNode
+        """
+
+        send_pipes = self.get_send_pipes(source_node.verbose)
+        recv_pipes = self.get_recv_pipes(target_node.verbose)
 
-        # sync datasets
         fail_count = 0
+        count = 0
         target_datasets = []
         for source_dataset in source_datasets:
 
+            # stats
+            if self.args.progress:
+                count = count + 1
+                self.progress("Analysing dataset {}/{} ({} failed)".format(count, len(source_datasets), fail_count))
+
             try:
                 # determine corresponding target_dataset
-                target_name = self.args.target_path + "/" + source_dataset.lstrip_path(self.args.strip_path)
-                target_dataset = ZfsDataset(target_node, target_name)
+                target_name = self.make_target_name(source_dataset)
+                target_dataset = target_node.get_dataset(target_name)
                 target_datasets.append(target_dataset)
 
                 # ensure parents exists
@@ -207,86 +312,45 @@ class ZfsAutobackup:
                         and not target_dataset.parent.exists:
                     target_dataset.parent.create_filesystem(parents=True)
 
-                # determine common zpool features
-                source_features = source_node.get_zfs_pool(source_dataset.split_path()[0]).features
-                target_features = target_node.get_zfs_pool(target_dataset.split_path()[0]).features
+                # determine common zpool features (cached, so no problem we call it often)
+                source_features = source_node.get_pool(source_dataset).features
+                target_features = target_node.get_pool(target_dataset).features
                 common_features = source_features and target_features
-                # source_dataset.debug("Common features: {}".format(common_features))
 
+                # sync the snapshots of this dataset
                 source_dataset.sync_snapshots(target_dataset, show_progress=self.args.progress,
-                                              features=common_features, filter_properties=filter_properties,
-                                              set_properties=set_properties,
+                                              features=common_features, filter_properties=self.filter_properties_list(),
+                                              set_properties=self.set_properties_list(),
                                               ignore_recv_exit_code=self.args.ignore_transfer_errors,
                                               holds=not self.args.no_holds, rollback=self.args.rollback,
-                                              raw=self.args.raw, other_snapshots=self.args.other_snapshots,
+                                              also_other_snapshots=self.args.other_snapshots,
                                               no_send=self.args.no_send,
-                                              destroy_incompatible=self.args.destroy_incompatible)
+                                              destroy_incompatible=self.args.destroy_incompatible,
+                                              send_pipes=send_pipes, recv_pipes=recv_pipes,
+                                              decrypt=self.args.decrypt, encrypt=self.args.encrypt,
+                                              zfs_compressed=self.args.zfs_compressed)
             except Exception as e:
+                if self.args.progress:
+                    self.clear_progress()
+
                 fail_count = fail_count + 1
                 source_dataset.error("FAILED: " + str(e))
                 if self.args.debug:
+                    self.verbose("Debug mode, aborting on first error")
                     raise
 
-        # if not self.args.no_thinning:
-        self.thin_missing_targets(ZfsDataset(target_node, self.args.target_path), target_datasets)
+        if self.args.progress:
+            self.clear_progress()
+
+        target_path_dataset = target_node.get_dataset(self.args.target_path)
+        if not self.args.no_thinning:
+            self.thin_missing_targets(target_dataset=target_path_dataset, used_target_datasets=target_datasets)
+
+        if self.args.destroy_missing is not None:
+            self.destroy_missing_targets(target_dataset=target_path_dataset, used_target_datasets=target_datasets)
 
         return fail_count
 
-    def thin_missing_targets(self, target_dataset, used_target_datasets):
-        """thin/destroy target datasets that are missing on the source."""
-
-        self.debug("Thinning obsolete datasets")
-
-        for dataset in target_dataset.recursive_datasets:
-            try:
-                if dataset not in used_target_datasets:
-                    dataset.debug("Missing on source, thinning")
-                    dataset.thin()
-
-                    # destroy_missing enabled?
-                    if self.args.destroy_missing is not None:
-
-                        # cant do anything without our own snapshots
-                        if not dataset.our_snapshots:
-                            if dataset.datasets:
-                                dataset.debug("Destroy missing: ignoring")
-                            else:
-                                dataset.verbose(
-                                    "Destroy missing: has no snapshots made by us. (please destroy manually)")
-                        else:
-                            # past the deadline?
-                            deadline_ttl = ThinnerRule("0s" + self.args.destroy_missing).ttl
-                            now = int(time.time())
-                            if dataset.our_snapshots[-1].timestamp + deadline_ttl > now:
-                                dataset.verbose("Destroy missing: Waiting for deadline.")
-                            else:
-
-                                dataset.debug("Destroy missing: Removing our snapshots.")
-
-                                # remove all our snaphots, except last, to safe space in case we fail later on
-                                for snapshot in dataset.our_snapshots[:-1]:
-                                    snapshot.destroy(fail_exception=True)
-
-                                # does it have other snapshots?
-                                has_others = False
-                                for snapshot in dataset.snapshots:
-                                    if not snapshot.is_ours():
-                                        has_others = True
-                                        break
-
-                                if has_others:
-                                    dataset.verbose("Destroy missing: Still in use by other snapshots")
-                                else:
-                                    if dataset.datasets:
-                                        dataset.verbose("Destroy missing: Still has children here.")
-                                    else:
-                                        dataset.verbose("Destroy missing.")
-                                        dataset.our_snapshots[-1].destroy(fail_exception=True)
-                                        dataset.destroy(fail_exception=True)
-
-            except Exception as e:
-                dataset.error("Error during destoy missing ({})".format(str(e)))
-
     def thin_source(self, source_datasets):
 
         self.set_title("Thinning source")
@@ -294,63 +358,109 @@ class ZfsAutobackup:
         for source_dataset in source_datasets:
             source_dataset.thin(skip_holds=True)
 
+    def filter_properties_list(self):
+
+        if self.args.filter_properties:
+            filter_properties = self.args.filter_properties.split(",")
+        else:
+            filter_properties = []
+
+        if self.args.clear_refreservation:
+            filter_properties.append("refreservation")
+
+        return filter_properties
+
+    def set_properties_list(self):
+
+        if self.args.set_properties:
+            set_properties = self.args.set_properties.split(",")
+        else:
+            set_properties = []
+
+        if self.args.clear_mountpoint:
+            set_properties.append("canmount=noauto")
+
+        return set_properties
+
     def run(self):
 
         try:
-            self.verbose(self.HEADER)
-
-            if self.args.test:
-                self.verbose("TEST MODE - SIMULATING WITHOUT MAKING ANY CHANGES")
 
+            ################ create source zfsNode
             self.set_title("Source settings")
 
             description = "[Source]"
-            source_thinner = Thinner(self.args.keep_source)
-            source_node = ZfsNode(self.args.backup_name, self, ssh_config=self.args.ssh_config,
+            if self.args.no_thinning:
+                source_thinner = None
+            else:
+                source_thinner = Thinner(self.args.keep_source)
+            source_node = ZfsNode(snapshot_time_format=self.snapshot_time_format, hold_name=self.hold_name, logger=self,
+                                  ssh_config=self.args.ssh_config,
                                   ssh_to=self.args.ssh_source, readonly=self.args.test,
                                   debug_output=self.args.debug_output, description=description, thinner=source_thinner)
-            source_node.verbose(
-                "Selects all datasets that have property 'autobackup:{}=true' (or childs of datasets that have "
-                "'autobackup:{}=child')".format(
-                    self.args.backup_name, self.args.backup_name))
 
+            ################# select source datasets
             self.set_title("Selecting")
-            selected_source_datasets = source_node.selected_datasets
-            if not selected_source_datasets:
-                self.error(
-                    "No source filesystems selected, please do a 'zfs set autobackup:{0}=true' on the source datasets "
-                    "you want to select.".format(
-                        self.args.backup_name))
+            source_datasets = source_node.selected_datasets(property_name=self.property_name,
+                                                            exclude_received=self.args.exclude_received,
+                                                            exclude_paths=self.exclude_paths,
+                                                            exclude_unchanged=self.args.exclude_unchanged,
+                                                            min_change=self.args.min_change)
+            if not source_datasets:
+                self.print_error_sources()
                 return 255
 
-            source_datasets = []
-
-            # filter out already replicated stuff?
-            if not self.args.ignore_replicated:
-                source_datasets = selected_source_datasets
-            else:
-                self.set_title("Filtering already replicated filesystems")
-                for selected_source_dataset in selected_source_datasets:
-                    if selected_source_dataset.is_changed(self.args.min_change):
-                        source_datasets.append(selected_source_dataset)
-                    else:
-                        selected_source_dataset.verbose("Ignoring, already replicated")
-
+            ################# snapshotting
             if not self.args.no_snapshot:
                 self.set_title("Snapshotting")
-                source_node.consistent_snapshot(source_datasets, source_node.new_snapshotname(),
-                                                min_changed_bytes=self.args.min_change)
+                snapshot_name = time.strftime(self.snapshot_time_format)
+                source_node.consistent_snapshot(source_datasets, snapshot_name,
+                                                min_changed_bytes=self.args.min_change,
+                                                pre_snapshot_cmds=self.args.pre_snapshot_cmd,
+                                                post_snapshot_cmds=self.args.post_snapshot_cmd)
 
+            ################# sync
             # if target is specified, we sync the datasets, otherwise we just thin the source. (e.g. snapshot mode)
             if self.args.target_path:
-                fail_count = self.sync_datasets(source_node, source_datasets)
+
+                # create target_node
+                self.set_title("Target settings")
+                if self.args.no_thinning:
+                    target_thinner = None
+                else:
+                    target_thinner = Thinner(self.args.keep_target)
+                target_node = ZfsNode(snapshot_time_format=self.snapshot_time_format, hold_name=self.hold_name,
+                                      logger=self, ssh_config=self.args.ssh_config,
+                                      ssh_to=self.args.ssh_target,
+                                      readonly=self.args.test, debug_output=self.args.debug_output,
+                                      description="[Target]",
+                                      thinner=target_thinner)
+                target_node.verbose("Receive datasets under: {}".format(self.args.target_path))
+
+                self.set_title("Synchronising")
+
+                # check if exists, to prevent vague errors
+                target_dataset = target_node.get_dataset(self.args.target_path)
+                if not target_dataset.exists:
+                    raise (Exception(
+                        "Target path '{}' does not exist. Please create this dataset first.".format(target_dataset)))
+
+                # do the actual sync
+                # NOTE: even with no_send, no_thinning and no_snapshot it does a usefull thing because it checks if the common snapshots and shows incompatible snapshots
+                fail_count = self.sync_datasets(
+                    source_node=source_node,
+                    source_datasets=source_datasets,
+                    target_node=target_node)
+
+            # no target specified, run in snapshot-only mode
             else:
-                self.thin_source(source_datasets)
+                if not self.args.no_thinning:
+                    self.thin_source(source_datasets)
                 fail_count = 0
 
             if not fail_count:
                 if self.args.test:
-                    self.set_title("All tests successfull.")
+                    self.set_title("All tests successful.")
                 else:
                     self.set_title("All operations completed successfully")
                     if not self.args.target_path:
@@ -358,11 +468,11 @@ class ZfsAutobackup:
 
             else:
                 if fail_count != 255:
-                    self.error("{} failures!".format(fail_count))
+                    self.error("{} dataset(s) failed!".format(fail_count))
 
             if self.args.test:
                 self.verbose("")
-                self.verbose("TEST MODE - DID NOT MAKE ANY CHANGES!")
+                self.warning("TEST MODE - DID NOT MAKE ANY CHANGES!")
 
             return fail_count
 
@@ -374,3 +484,13 @@ class ZfsAutobackup:
         except KeyboardInterrupt:
             self.error("Aborted")
             return 255
+
+
+def cli():
+    import sys
+
+    sys.exit(ZfsAutobackup(sys.argv[1:], False).run())
+
+
+if __name__ == "__main__":
+    cli()

zfs_autobackup/ZfsAutoverify.py

@@ -0,0 +1,402 @@
+import os
+import time
+
+from .ExecuteNode import ExecuteNode
+from .ZfsAuto import ZfsAuto
+from .ZfsDataset import ZfsDataset
+from .ZfsNode import ZfsNode
+import sys
+import platform
+
+def tmp_name(suffix=""):
+    """create temporary name unique to this process and node"""
+
+    #we could use uuids but those are ugly and confusing
+    name="zfstmp_{}_{}".format(platform.node(), os.getpid())
+    name=name+suffix
+    return name
+
+def hash_tree_tar(node, path):
+    """calculate md5sum of a directory tree, using tar"""
+
+    node.debug("Hashing filesystem {} ".format(path))
+
+    cmd=[ "tar", "-cf", "-", "-C", path, ".",
+          ExecuteNode.PIPE, "md5sum"]
+
+    stdout = node.run(cmd)
+
+    if node.readonly:
+        hashed=None
+    else:
+        hashed = stdout[0].split(" ")[0]
+
+    node.debug("Hash of {} filesytem is {}".format(path, hashed))
+
+    return hashed
+
+
+def compare_trees_tar(source_node, source_path, target_node, target_path):
+    """compare two trees using tar. compatible and simple"""
+
+    source_hash= hash_tree_tar(source_node, source_path)
+    target_hash= hash_tree_tar(target_node, target_path)
+
+    if source_hash != target_hash:
+        raise Exception("md5hash difference: {} != {}".format(source_hash, target_hash))
+
+
+def compare_trees_rsync(source_node, source_path, target_node, target_path):
+    """use rsync to compare two trees.
+     Advantage is that we can see which individual files differ.
+     But requires rsync and cant do remote to remote."""
+
+    cmd = ["rsync", "-rcn", "--info=COPY,DEL,MISC,NAME,SYMSAFE", "--msgs2stderr", "--delete" ]
+
+    #local
+    if source_node.ssh_to is None and target_node.ssh_to is None:
+        cmd.append("{}/".format(source_path))
+        cmd.append("{}/".format(target_path))
+        source_node.debug("Running rsync locally, on source.")
+        stdout, stderr = source_node.run(cmd, return_stderr=True)
+
+    #source is local
+    elif source_node.ssh_to is None and target_node.ssh_to is not None:
+        cmd.append("{}/".format(source_path))
+        cmd.append("{}:{}/".format(target_node.ssh_to, target_path))
+        source_node.debug("Running rsync locally, on source.")
+        stdout, stderr = source_node.run(cmd, return_stderr=True)
+
+    #target is local
+    elif source_node.ssh_to is not None and target_node.ssh_to is None:
+        cmd.append("{}:{}/".format(source_node.ssh_to, source_path))
+        cmd.append("{}/".format(target_path))
+        source_node.debug("Running rsync locally, on target.")
+        stdout, stderr=target_node.run(cmd, return_stderr=True)
+
+    else:
+        raise Exception("Source and target cant both be remote when verifying. (rsync limitation)")
+
+    if stderr:
+        raise Exception("Dataset verify failed, see above list for differences")
+
+
+def verify_filesystem(source_snapshot, source_mnt, target_snapshot, target_mnt, method):
+    """Compare the contents of two zfs filesystem snapshots """
+
+    try:
+
+        # mount the snapshots
+        source_snapshot.mount(source_mnt)
+        target_snapshot.mount(target_mnt)
+
+        if method=='rsync':
+            compare_trees_rsync(source_snapshot.zfs_node, source_mnt, target_snapshot.zfs_node, target_mnt)
+        elif method == 'tar':
+            compare_trees_tar(source_snapshot.zfs_node, source_mnt, target_snapshot.zfs_node, target_mnt)
+        else:
+            raise(Exception("program errror, unknown method"))
+
+    finally:
+        source_snapshot.unmount()
+        target_snapshot.unmount()
+
+
+def hash_dev(node, dev):
+    """calculate md5sum of a device on a node"""
+
+    node.debug("Hashing volume {} ".format(dev))
+
+    cmd = [ "md5sum", dev ]
+
+    stdout = node.run(cmd)
+
+    if node.readonly:
+        hashed=None
+    else:
+        hashed = stdout[0].split(" ")[0]
+
+    node.debug("Hash of volume {} is {}".format(dev, hashed))
+
+    return hashed
+
+# def activate_volume_snapshot(dataset, snapshot):
+#     """enables snapdev, waits and tries to findout /dev path to the volume, in a compatible way. (linux/freebsd/smartos)"""
+#
+#     dataset.set("snapdev", "visible")
+#
+#     #NOTE: add smartos location to this list as well
+#     locations=[
+#         "/dev/zvol/" + snapshot.name
+#     ]
+#
+#     dataset.debug("Waiting for /dev entry to appear...")
+#     time.sleep(0.1)
+#
+#     start_time=time.time()
+#     while time.time()-start_time<10:
+#         for location in locations:
+#             stdout, stderr, exit_code=dataset.zfs_node.run(["test", "-e", location], return_all=True, valid_exitcodes=[0,1])
+#
+#             #fake it in testmode
+#             if dataset.zfs_node.readonly:
+#                 return location
+#
+#             if exit_code==0:
+#                 return location
+#         time.sleep(1)
+#
+#     raise(Exception("Timeout while waiting for {} entry to appear.".format(locations)))
+#
+# def deacitvate_volume_snapshot(dataset):
+#     dataset.inherit("snapdev")
+
+#NOTE: https://www.google.com/search?q=Mount+Path+Limit+freebsd
+#Freebsd has limitations regarding path length, so we cant use the above method.
+#Instead we create a temporary clone
+
+def get_tmp_clone_name(snapshot):
+    pool=snapshot.zfs_node.get_pool(snapshot)
+    return pool.name+"/"+tmp_name()
+
+def activate_volume_snapshot(snapshot):
+    """clone volume, waits and tries to findout /dev path to the volume, in a compatible way. (linux/freebsd/smartos)"""
+
+    clone_name=get_tmp_clone_name(snapshot)
+    clone=snapshot.clone(clone_name)
+
+    #NOTE: add smartos location to this list as well
+    locations=[
+        "/dev/zvol/" + clone_name
+    ]
+
+    clone.debug("Waiting for /dev entry to appear...")
+    time.sleep(0.1)
+
+    start_time=time.time()
+    while time.time()-start_time<10:
+        for location in locations:
+            stdout, stderr, exit_code=clone.zfs_node.run(["test", "-e", location], return_all=True, valid_exitcodes=[0,1])
+
+            #fake it in testmode
+            if clone.zfs_node.readonly:
+                return location
+
+            if exit_code==0:
+                return location
+        time.sleep(1)
+
+    raise(Exception("Timeout while waiting for {} entry to appear.".format(locations)))
+
+def deacitvate_volume_snapshot(snapshot):
+    clone_name=get_tmp_clone_name(snapshot)
+    clone=snapshot.zfs_node.get_dataset(clone_name)
+    clone.destroy()
+
+def verify_volume(source_dataset, source_snapshot, target_dataset, target_snapshot):
+    """compare the contents of two zfs volume snapshots"""
+
+    try:
+        source_dev= activate_volume_snapshot(source_snapshot)
+        target_dev= activate_volume_snapshot(target_snapshot)
+
+        source_hash= hash_dev(source_snapshot.zfs_node, source_dev)
+        target_hash= hash_dev(target_snapshot.zfs_node, target_dev)
+
+        if source_hash!=target_hash:
+            raise Exception("md5hash difference: {} != {}".format(source_hash, target_hash))
+
+    finally:
+        deacitvate_volume_snapshot(source_snapshot)
+        deacitvate_volume_snapshot(target_snapshot)
+
+def create_mountpoints(source_node, target_node):
+
+    # prepare mount points
+    source_node.debug("Create temporary mount point")
+    source_mnt = "/tmp/"+tmp_name("source")
+    source_node.run(["mkdir", source_mnt])
+
+    target_node.debug("Create temporary mount point")
+    target_mnt = "/tmp/"+tmp_name("target")
+    target_node.run(["mkdir", target_mnt])
+
+    return source_mnt, target_mnt
+
+
+def cleanup_mountpoint(node, mnt):
+    node.debug("Cleaning up temporary mount point")
+    node.run([ "rmdir", mnt ], hide_errors=True, valid_exitcodes=[] )
+
+
+class ZfsAutoverify(ZfsAuto):
+    """The zfs-autoverify class, default agruments and stuff come from ZfsAuto"""
+
+    def __init__(self, argv, print_arguments=True):
+
+        # NOTE: common options and parameters are in ZfsAuto
+        super(ZfsAutoverify, self).__init__(argv, print_arguments)
+
+    def parse_args(self, argv):
+        """do extra checks on common args"""
+
+        args=super(ZfsAutoverify, self).parse_args(argv)
+
+        if args.target_path == None:
+            self.log.error("Please specify TARGET-PATH")
+            sys.exit(255)
+
+        return args
+
+    def get_parser(self):
+        """extend common parser with  extra stuff needed for zfs-autobackup"""
+
+        parser=super(ZfsAutoverify, self).get_parser()
+
+        group=parser.add_argument_group("Verify options")
+        group.add_argument('--fs-compare', metavar='METHOD', default="tar", choices=["tar", "rsync"],
+                            help='Compare method to use for filesystems. (tar, rsync) Default: %(default)s ')
+
+        return parser
+
+    def verify_datasets(self, source_mnt, source_datasets, target_node, target_mnt):
+
+        fail_count=0
+        count = 0
+        for source_dataset in source_datasets:
+
+            # stats
+            if self.args.progress:
+                count = count + 1
+                self.progress("Analysing dataset {}/{} ({} failed)".format(count, len(source_datasets), fail_count))
+
+            try:
+                # determine corresponding target_dataset
+                target_name = self.make_target_name(source_dataset)
+                target_dataset = target_node.get_dataset(target_name)
+
+                # find common snapshots to  verify
+                source_snapshot = source_dataset.find_common_snapshot(target_dataset)
+                target_snapshot = target_dataset.find_snapshot(source_snapshot)
+
+                if source_snapshot is None or target_snapshot is None:
+                    raise(Exception("Cant find common snapshot"))
+
+                target_snapshot.verbose("Verifying...")
+
+                if source_dataset.properties['type']=="filesystem":
+                    verify_filesystem(source_snapshot, source_mnt, target_snapshot, target_mnt, self.args.fs_compare)
+                elif source_dataset.properties['type']=="volume":
+                    verify_volume(source_dataset, source_snapshot, target_dataset, target_snapshot)
+                else:
+                    raise(Exception("{} has unknown type {}".format(source_dataset, source_dataset.properties['type'])))
+
+
+            except Exception as e:
+                if self.args.progress:
+                    self.clear_progress()
+
+                fail_count = fail_count + 1
+                target_dataset.error("FAILED: " + str(e))
+                if self.args.debug:
+                    self.verbose("Debug mode, aborting on first error")
+                    raise
+
+        if self.args.progress:
+            self.clear_progress()
+
+        return fail_count
+
+    def run(self):
+
+        source_node=None
+        source_mnt=None
+        target_node=None
+        target_mnt=None
+
+
+        try:
+
+            ################ create source zfsNode
+            self.set_title("Source settings")
+
+            description = "[Source]"
+            source_node = ZfsNode(snapshot_time_format=self.snapshot_time_format, hold_name=self.hold_name, logger=self,
+                                  ssh_config=self.args.ssh_config,
+                                  ssh_to=self.args.ssh_source, readonly=self.args.test,
+                                  debug_output=self.args.debug_output, description=description)
+
+            ################# select source datasets
+            self.set_title("Selecting")
+            source_datasets = source_node.selected_datasets(property_name=self.property_name,
+                                                            exclude_received=self.args.exclude_received,
+                                                            exclude_paths=self.exclude_paths,
+                                                            exclude_unchanged=self.args.exclude_unchanged,
+                                                            min_change=0)
+            if not source_datasets:
+                self.print_error_sources()
+                return 255
+
+            # create target_node
+            self.set_title("Target settings")
+            target_node = ZfsNode(snapshot_time_format=self.snapshot_time_format, hold_name=self.hold_name,
+                                  logger=self, ssh_config=self.args.ssh_config,
+                                  ssh_to=self.args.ssh_target,
+                                  readonly=self.args.test, debug_output=self.args.debug_output,
+                                  description="[Target]")
+            target_node.verbose("Verify datasets under: {}".format(self.args.target_path))
+
+            self.set_title("Verifying")
+
+            source_mnt, target_mnt= create_mountpoints(source_node, target_node)
+
+            fail_count = self.verify_datasets(
+                source_mnt=source_mnt,
+                source_datasets=source_datasets,
+                target_mnt=target_mnt,
+                target_node=target_node)
+
+            if not fail_count:
+                if self.args.test:
+                    self.set_title("All tests successful.")
+                else:
+                    self.set_title("All datasets verified ok")
+
+            else:
+                if fail_count != 255:
+                    self.error("{} dataset(s) failed!".format(fail_count))
+
+            if self.args.test:
+                self.verbose("")
+                self.warning("TEST MODE - DID NOT VERIFY ANYTHING!")
+
+            return fail_count
+
+        except Exception as e:
+            self.error("Exception: " + str(e))
+            if self.args.debug:
+                raise
+            return 255
+        except KeyboardInterrupt:
+            self.error("Aborted")
+            return 255
+        finally:
+
+            # cleanup
+            if source_mnt is not None:
+                cleanup_mountpoint(source_node, source_mnt)
+
+            if target_mnt is not None:
+                cleanup_mountpoint(target_node, target_mnt)
+
+
+
+
+def cli():
+    import sys
+
+    sys.exit(ZfsAutoverify(sys.argv[1:], False).run())
+
+
+if __name__ == "__main__":
+    cli()

zfs_autobackup/ZfsNode.py

@@ -1,25 +1,30 @@
+# python 2 compatibility
+from __future__ import print_function
 import re
+import shlex
 import subprocess
 import sys
 import time
 
-from zfs_autobackup.ExecuteNode import ExecuteNode
-from zfs_autobackup.Thinner import Thinner
-from zfs_autobackup.CachedProperty import CachedProperty
-from zfs_autobackup.ZfsPool import ZfsPool
-from zfs_autobackup.ZfsDataset import ZfsDataset
+from .ExecuteNode import ExecuteNode
+from .Thinner import Thinner
+from .CachedProperty import CachedProperty
+from .ZfsPool import ZfsPool
+from .ZfsDataset import ZfsDataset
+from .ExecuteNode import ExecuteError
 
 
 class ZfsNode(ExecuteNode):
     """a node that contains zfs datasets. implements global (systemwide/pool wide) zfs commands"""
 
-    def __init__(self, backup_name, logger, ssh_config=None, ssh_to=None, readonly=False, description="",
-                 debug_output=False, thinner=Thinner()):
-        self.backup_name = backup_name
-        if not description and ssh_to:
-            self.description = ssh_to
-        else:
-            self.description = description
+    def __init__(self, snapshot_time_format, hold_name, logger, ssh_config=None, ssh_to=None, readonly=False,
+                 description="",
+                 debug_output=False, thinner=None):
+
+        self.snapshot_time_format = snapshot_time_format
+        self.hold_name = hold_name
+
+        self.description = description
 
         self.logger = logger
 
@@ -31,23 +36,32 @@ class ZfsNode(ExecuteNode):
         else:
             self.verbose("Datasets are local")
 
-        rules = thinner.human_rules()
-        if rules:
-            for rule in rules:
-                self.verbose(rule)
-        else:
-            self.verbose("Keep no old snaphots")
+        if thinner is not None:
+            rules = thinner.human_rules()
+            if rules:
+                for rule in rules:
+                    self.verbose(rule)
+            else:
+                self.verbose("Keep no old snaphots")
 
-        self.thinner = thinner
+        self.__thinner = thinner
 
         # list of ZfsPools
         self.__pools = {}
+        self.__datasets = {}
 
         self._progress_total_bytes = 0
         self._progress_start_time = time.time()
 
         ExecuteNode.__init__(self, ssh_config=ssh_config, ssh_to=ssh_to, readonly=readonly, debug_output=debug_output)
 
+    def thin(self, objects, keep_objects):
+        # NOTE: if thinning is disabled with --no-thinning, self.__thinner will be none.
+        if self.__thinner is not None:
+            return self.__thinner.thin(objects, keep_objects)
+        else:
+            return (keep_objects, [])
+
     @CachedProperty
     def supported_send_options(self):
         """list of supported options, for optimizing sends"""
@@ -75,17 +89,25 @@ class ZfsNode(ExecuteNode):
 
         try:
             self.run(cmd, hide_errors=True, valid_exitcodes=[0, 1])
-        except subprocess.CalledProcessError:
+        except ExecuteError:
             return False
 
         return True
 
-    # TODO: also create a get_zfs_dataset() function that stores all the objects in a dict. This should optimize
-    #  caching a bit and is more consistent.
-    def get_zfs_pool(self, name):
-        """get a ZfsPool() object from specified name. stores objects internally to enable caching"""
+    def get_pool(self, dataset):
+        """get a ZfsPool() object from dataset. stores objects internally to enable caching"""
 
-        return self.__pools.setdefault(name, ZfsPool(self, name))
+        if not isinstance(dataset, ZfsDataset):
+            raise (Exception("{} is not a ZfsDataset".format(dataset)))
+
+        zpool_name = dataset.name.split("/")[0]
+
+        return self.__pools.setdefault(zpool_name, ZfsPool(self, zpool_name))
+
+    def get_dataset(self, name, force_exists=None):
+        """get a ZfsDataset() object from name. stores objects internally to enable caching"""
+
+        return self.__datasets.setdefault(name, ZfsDataset(self, name))
 
     def reset_progress(self):
         """reset progress output counters"""
@@ -113,7 +135,7 @@ class ZfsNode(ExecuteNode):
                     self._progress_total_bytes = int(progress_fields[2])
                 elif progress_fields[0] == 'incremental':
                     self._progress_total_bytes = int(progress_fields[3])
-                else:
+                elif progress_fields[1].isnumeric():
                     bytes_ = int(progress_fields[1])
                     if self._progress_total_bytes:
                         percentage = min(100, int(bytes_ * 100 / self._progress_total_bytes))
@@ -121,9 +143,9 @@ class ZfsNode(ExecuteNode):
                         bytes_left = self._progress_total_bytes - bytes_
                         minutes_left = int((bytes_left / (bytes_ / (time.time() - self._progress_start_time))) / 60)
 
-                        print(">>> {}% {}MB/s (total {}MB, {} minutes left)     \r".format(percentage, speed, int(
-                            self._progress_total_bytes / (1024 * 1024)), minutes_left), end='', file=sys.stderr)
-                        sys.stderr.flush()
+                        self.logger.progress(
+                            "Transfer {}% {}MB/s (total {}MB, {} minutes left)".format(percentage, speed, int(
+                                self._progress_total_bytes / (1024 * 1024)), minutes_left))
 
             return
 
@@ -133,8 +155,8 @@ class ZfsNode(ExecuteNode):
         else:
             self.error(prefix + line.rstrip())
 
-    def _parse_stderr_pipe(self, line, hide_errors):
-        self.parse_zfs_progress(line, hide_errors, "STDERR|> ")
+    # def _parse_stderr_pipe(self, line, hide_errors):
+    #     self.parse_zfs_progress(line, hide_errors, "STDERR|> ")
 
     def _parse_stderr(self, line, hide_errors):
         self.parse_zfs_progress(line, hide_errors, "STDERR > ")
@@ -145,14 +167,14 @@ class ZfsNode(ExecuteNode):
     def error(self, txt):
         self.logger.error("{} {}".format(self.description, txt))
 
+    def warning(self, txt):
+        self.logger.warning("{} {}".format(self.description, txt))
+
     def debug(self, txt):
         self.logger.debug("{} {}".format(self.description, txt))
 
-    def new_snapshotname(self):
-        """determine uniq new snapshotname"""
-        return self.backup_name + "-" + time.strftime("%Y%m%d%H%M%S")
-
-    def consistent_snapshot(self, datasets, snapshot_name, min_changed_bytes):
+    def consistent_snapshot(self, datasets, snapshot_name, min_changed_bytes, pre_snapshot_cmds=[],
+                            post_snapshot_cmds=[]):
         """create a consistent (atomic) snapshot of specified datasets, per pool.
         """
 
@@ -166,7 +188,7 @@ class ZfsNode(ExecuteNode):
                 continue
 
             # force_exist, since we're making it
-            snapshot = ZfsDataset(dataset.zfs_node, dataset.name + "@" + snapshot_name, force_exists=True)
+            snapshot = self.get_dataset(dataset.name + "@" + snapshot_name, force_exists=True)
 
             pool = dataset.split_path()[0]
             if pool not in pools:
@@ -182,18 +204,30 @@ class ZfsNode(ExecuteNode):
             self.verbose("No changes anywhere: not creating snapshots.")
             return
 
-        # create consistent snapshot per pool
-        for (pool_name, snapshots) in pools.items():
-            cmd = ["zfs", "snapshot"]
+        try:
+            for cmd in pre_snapshot_cmds:
+                self.verbose("Running pre-snapshot-cmd")
+                self.run(cmd=shlex.split(cmd), readonly=False)
 
-            cmd.extend(map(lambda snapshot_: str(snapshot_), snapshots))
+            # create consistent snapshot per pool
+            for (pool_name, snapshots) in pools.items():
+                cmd = ["zfs", "snapshot"]
 
-            self.verbose("Creating snapshots {} in pool {}".format(snapshot_name, pool_name))
-            self.run(cmd, readonly=False)
+                cmd.extend(map(lambda snapshot_: str(snapshot_), snapshots))
 
-    @CachedProperty
-    def selected_datasets(self):
-        """determine filesystems that should be backupped by looking at the special autobackup-property, systemwide
+                self.verbose("Creating snapshots {} in pool {}".format(snapshot_name, pool_name))
+                self.run(cmd, readonly=False)
+
+        finally:
+            for cmd in post_snapshot_cmds:
+                self.verbose("Running post-snapshot-cmd")
+                try:
+                    self.run(cmd=shlex.split(cmd), readonly=False)
+                except Exception as e:
+                    pass
+
+    def selected_datasets(self, property_name, exclude_received, exclude_paths, exclude_unchanged, min_change):
+        """determine filesystems that should be backed up by looking at the special autobackup-property, systemwide
 
            returns: list of ZfsDataset
         """
@@ -202,35 +236,34 @@ class ZfsNode(ExecuteNode):
 
         # get all source filesystems that have the backup property
         lines = self.run(tab_split=True, readonly=True, cmd=[
-            "zfs", "get", "-t", "volume,filesystem", "-o", "name,value,source", "-s", "local,inherited", "-H",
-            "autobackup:" + self.backup_name
+            "zfs", "get", "-t", "volume,filesystem", "-o", "name,value,source", "-H",
+            property_name
         ])
 
-        # determine filesystems that should be actually backupped
+        # The returnlist of selected ZfsDataset's:
         selected_filesystems = []
-        direct_filesystems = []
+
+        # list of sources, used to resolve inherited sources
+        sources = {}
+
         for line in lines:
-            (name, value, source) = line
-            dataset = ZfsDataset(self, name)
-
-            if value == "false":
-                dataset.verbose("Ignored (disabled)")
+            (name, value, raw_source) = line
+            dataset = self.get_dataset(name, force_exists=True)
 
+            # "resolve" inherited sources
+            sources[name] = raw_source
+            if raw_source.find("inherited from ") == 0:
+                inherited = True
+                inherited_from = re.sub("^inherited from ", "", raw_source)
+                source = sources[inherited_from]
             else:
-                if source == "local" and (value == "true" or value == "child"):
-                    direct_filesystems.append(name)
+                inherited = False
+                source = raw_source
 
-                if source == "local" and value == "true":
-                    dataset.verbose("Selected (direct selection)")
-                    selected_filesystems.append(dataset)
-                elif source.find("inherited from ") == 0 and (value == "true" or value == "child"):
-                    inherited_from = re.sub("^inherited from ", "", source)
-                    if inherited_from in direct_filesystems:
-                        selected_filesystems.append(dataset)
-                        dataset.verbose("Selected (inherited selection)")
-                    else:
-                        dataset.debug("Ignored (already a backup)")
-                else:
-                    dataset.verbose("Ignored (only childs)")
+            # determine it
+            if dataset.is_selected(value=value, source=source, inherited=inherited, exclude_received=exclude_received,
+                                   exclude_paths=exclude_paths, exclude_unchanged=exclude_unchanged,
+                                   min_change=min_change):
+                selected_filesystems.append(dataset)
 
         return selected_filesystems

zfs_autobackup/ZfsPool.py

@@ -1,4 +1,4 @@
-from zfs_autobackup.CachedProperty import CachedProperty
+from .CachedProperty import CachedProperty
 
 
 class ZfsPool():
@@ -45,8 +45,7 @@ class ZfsPool():
         ret = {}
 
         for pair in self.zfs_node.run(tab_split=True, cmd=cmd, readonly=True, valid_exitcodes=[0]):
-            if len(pair) == 4:
-                ret[pair[1]] = pair[2]
+            ret[pair[1]] = pair[2]
 
         return ret
 

zfs_autobackup/__init__.py

@@ -1,7 +1,3 @@
 
-def cli():
-    import sys
-    from zfs_autobackup.ZfsAutobackup import ZfsAutobackup
 
-    zfs_autobackup = ZfsAutobackup(sys.argv[1:], False)
-    sys.exit(zfs_autobackup.run())
+

zfs_autobackup/__main__.py

@@ -4,7 +4,4 @@
 
 import sys
 
-if __name__ == "__main__":
-    from . import cli
-    cli()
 

zfs_autobackup/compressors.py

@@ -0,0 +1,75 @@
+# Adopted from Syncoid :)
+
+# this software is licensed for use under the Free Software Foundation's GPL v3.0 license, as retrieved
+# from http://www.gnu.org/licenses/gpl-3.0.html on 2014-11-17.  A copy should also be available in this
+# project's Git repository at https://github.com/jimsalterjrs/sanoid/blob/master/LICENSE.
+
+COMPRESS_CMDS = {
+    'gzip': {
+        'cmd': 'gzip',
+        'args': [ '-3' ],
+        'dcmd': 'zcat',
+        'dargs': [],
+    },
+    'pigz-fast': {
+        'cmd': 'pigz',
+        'args': [ '-3' ],
+        'dcmd': 'pigz',
+        'dargs': [ '-dc' ],
+    },
+    'pigz-slow': {
+        'cmd': 'pigz',
+        'args': [ '-9' ],
+        'dcmd': 'pigz',
+        'dargs': [ '-dc' ],
+    },
+    'zstd-fast': {
+        'cmd': 'zstdmt',
+        'args': [ '-3' ],
+        'dcmd': 'zstdmt',
+        'dargs': [ '-dc' ],
+    },
+    'zstd-slow': {
+        'cmd': 'zstdmt',
+        'args': [ '-19' ],
+        'dcmd': 'zstdmt',
+        'dargs': [ '-dc' ],
+    },
+    'zstd-adapt': {
+        'cmd': 'zstdmt',
+        'args': [ '--adapt' ],
+        'dcmd': 'zstdmt',
+        'dargs': [ '-dc' ],
+    },
+    'xz': {
+        'cmd': 'xz',
+        'args': [],
+        'dcmd': 'xz',
+        'dargs': [ '-d' ],
+    },
+    'lzo': {
+        'cmd': 'lzop',
+        'args': [],
+        'dcmd': 'lzop',
+        'dargs': [ '-dfc' ],
+    },
+    'lz4': {
+        'cmd': 'lz4',
+        'args': [],
+        'dcmd': 'lz4',
+        'dargs': [ '-dc' ],
+    },
+}
+
+def compress_cmd(compressor):
+    ret=[ COMPRESS_CMDS[compressor]['cmd'] ]
+    ret.extend( COMPRESS_CMDS[compressor]['args'])
+    return ret
+
+def decompress_cmd(compressor):
+    ret= [ COMPRESS_CMDS[compressor]['dcmd'] ]
+    ret.extend(COMPRESS_CMDS[compressor]['dargs'])
+    return ret
+
+def choices():
+    return COMPRESS_CMDS.keys()